Abstract:Accurately predicting the dynamic response of the maglev turning electric spindle is the key requirement for ensuring cutting stability and realizing the active control of the magnetic bearing. The previous research usually does not consider the influence of the variable mass effect, which leads to the control accuracy of the magnetic bearing not reaching the expected effect. Aiming at the problem that the cross-sectional area, moment of inertia and mass of the shaft will change in real time due to the removal of the workpiece material during the turning process of the maglev electric spindle. Based on the Rayleigh continuous beam vibration theory, considering the three-dimensional moving cutting force of turning processing, the reverse thrust caused by chip loss, and the time-varying electromagnetic force caused by the change in vibration, using the hypothetical mode method and with the help of Lagrange equations, the variable mass system model of the maglev turning electric spindle is established, then the Runge–Kuta method is used for numerical calculation and MATLAB is used for simulation. The simulation results show that the rotor-active magnetic bearing-workpiece system model established in this paper is more accurate in predicting the dynamic response. The dynamic response is characterized by quasi-periodic vibration, and the influence of the first four modes cannot be ignored. At the same time, the cutting force caused by the axial movement and the reverse thrust caused by the time-varying mass together determine the overshoot of the unbalanced response and the severity of the vibration. In addition, the time-varying mass makes the natural frequency of the system no longer constant, but varies with the workpiece mass.

Simulation and Test of Spindle Mode of Planetary Variable Speed Device

Dynamic modeling and vibration response analysis of high speed motorized spindle

Study on Modal Test and Analysis of Planetary Transmission Mechanism

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Influence of Bearing Configuration on Spindle Modal Characteristics

Dynamic modeling and analysis of high-speed flexible planetary gear transmission systems

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Thermal characterizations and model of high speed motorized spindle in virtual-reality

Testing and Analysis of the Dynamic Characteristics of Vertical Machining Centers

Modeling and dynamic response of variable mass system of maglev turning electric spindle

A Study on the Static and Dynamic Characteristics of the Spindle System of a Spiral Bevel Gear Grinding Machine

Modelling and Characteristic Investigation of Spindle-Holder Assembly under Clamping and Centrifugal Forces

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Simulation and Experimental Study of Small Hybrid Vibration Spindle

Experimental Modal Analysis of Motorized Spindle Based on Stochastic Subspace Identification

MODAL TESTING AND FINITE ELEMENT MODELLING OF SUBSYSTEM IN HARD DISK DRIVE

Dynamic modeling and analysis for a drive axle gear transmission system

Thermal-mechanical dynamic interaction in high-speed motorized spindle considering nonlinear vibration

Dynamic Modeling and Analysis of Nonlinear Compound Planetary System

Simulation on thermal characteristics of high-speed motorized spindle

Bearing Dynamics Modeling Based on the Virtual State-Space and Hammerstein–Wiener Model