Abstract:Deterioration of concrete infrastructures occurs for several reasons, leading to operational problems and further collapse. Freezing-thawing processes are one of the active damage mechanisms in cold regions causing defect accumulation in the inner structure of the material and reduction of the mechanical properties. The optimal way to evaluate the damage degree is by applying non-destructive testing (NDT) methods which allow detailed and integrated results. In this research, a relationship between Acoustic Emission (AE) release energy trend and X-ray Computed Tomography (CT) parameters was investigated for damage quantification. Visualization and extraction of the internal concrete components were conducted by X-ray CT. The ultrasonic pulse velocity (UPV) and resonant frequency methods were employed for the determination of the dynamic modulus of elasticity. After utilizing AE on the compression test, the damage characterization was evaluated. The extensive description of structural members in in-service structure was acquired using principal component analysis (PCA). The X-ray CT results show that all specimens have initial damage degrees in form of cracks and voids unevenly distributed within the concrete matrix. Regarding the irrigation structure, all concrete specimens have unique particle characteristics depending on which structural members they were drilled out from. Moreover, it is observed that the accumulated damage in the form of voids positively correlates with the initial AE energy release rate. In concrete specimens with low damage degrees, the AE energy release has an upward trend of low amplitude (≤50 dB) with a silent stage at the initial loading and sudden release only near the final failure. In contrast, heavily damaged concrete shows continuous AE energy release of high amplitude (≥60 dB) and with a high initial AE energy release rate corresponding to the uninterrupted crack propagation and coalescence in the early stage of fracture and throughout the loading due to the high weak zones ratio. These results indicate that frost damage can be evaluated by the comprehensive analysis of the fracture process of concrete based on X-ray CT and AE results to characterize the damage degree.

Assessment of Concrete Structures Affected by Alkali–Silica Reaction and Freeze–Thaw by Use of Ultrasonic Surface Wave Method

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Wave mixing technique for nondestructive assessment of alkali-silica reaction damage in concrete prism samples

Long-term ultrasonic monitoring of concrete affected by alkali-silica reaction

Monitoring accelerated alkali-silica reaction in concrete prisms with petrography and electrical conductivity measurements

ASSESSMENT OF ALKALI‐SILICA REACTION DAMAGE IN MORTARS WITH NONLINEAR ULTRASONIC TECHNIQUES

Evaluation of alkali–silica reaction damage in concrete by using acoustic emission signal features and damage rating index: damage monitoring on concrete prisms

Alkali-silica reaction (ASR) detection in concrete from frequency dependent ultrasonic attenuation

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Lattice Discrete Particle Modeling of acoustic nonlinearity change in accelerated alkali silica reaction (ASR) tests

Structural behaviors evaluation of RC beam under frost damage - A methodology with meso-macro material/bond simulation and integrating into structural analysis

Ultrasonic Coda Wave Monitoring of Alkali-Silica Reactivity in Concrete Laboratory Prisms

Assessment of alkali–silica reaction damage through quantification of concrete nonlinearity

Alkali-silica reaction products and cracks: X-ray micro-tomography-based analysis of their spatial-temporal evolution at a mesoscale

Monitoring of dielectric permittivity in accelerated alkali-silica reaction concrete with microwave backscattering

Damage Mechanism Evaluation of Large-Scale Concrete Structures Affected by Alkali-Silica Reaction Using Acoustic Emission

Development of microwave and impedance spectroscopy methods for in-situ nondestructive evaluation of alkali silica reaction in concrete

Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States Case Studies in Construction Materials

Frost damage evaluation of concrete irrigation structure by X-ray CT and AE energy release trend at the initial loading stage

A Multiscale and Multimethod Approach to Assess and Mitigate Concrete Damage due to Alkali–Silica Reaction

Damage Mechanism Evaluation of Large-Scale Concrete Structures Affected by Alkali-Silica Reaction Using Pattern Recognition