Abstract:Alkali silica reaction (ASR) in concrete is a complex, multi-scale chemo-mechanical problem characterized by expansion and cracking of concrete meso-structure. Driven by various environmental factors such as humidity and temperature levels, it causes microscopic to macroscopic cracking of concrete resulting in degradation of concrete mechanical properties. Many standardized test methods have been proposed to investigate concrete vulnerability to ASR and they are characterized by time durations varying from only 2 weeks (accelerated mortar bar test) to up to two years (concrete prism test). While these tests can give some insight on the susceptibility of new structures to ASR damage, the assessment of the residual loading carrying capacity of existing ASR affected structures mostly rely on destructive evaluations. This approach is not only cost ineffective, but also difficult or even dangerous to implement for sensitive structures such as, nuclear power plants. Promising alternatives are ultrasonic nondestructive evaluation techniques that have been adopted successfully to detect metallic materials fatigue damage and debonding in composites. These techniques can detect early damage stages that cannot be captured accurately by using simple linear measurements but do not provide a direct measurement of the damage characteristics (e.g. statistics of crack opening) and, much less, of the deterioration of mechanical properties such as stiffness and strength. This can be achieved, however, by integrating non destructive measurements with accurate computational modeling of the damage mechanisms associated with ASR. This paper pursues such integration within the framework of the Lattice Discrete Particle Model (LDPM), a mesoscale model for concrete with superior modeling capability of fracturing behavior that was recently extended to account for ASR damage. The numerical simulations carried out in this study demonstrate (1) the ability of LDPM to replicate ultrasonic nonlinear phenomena and (2) that a strong correlation exists between these phenomena, local characteristics of cracking evolution, as well as stiffness and strength reduction.

ASSESSMENT OF ALKALI‐SILICA REACTION DAMAGE IN MORTARS WITH NONLINEAR ULTRASONIC TECHNIQUES

Comparison of Field Observations with Laboratory Test Results on Concretes Undergoing Alkali-Silica Reaction

RAPID ASSESSMENT OF ALKALI‐SILICA REACTION DAMAGE IN CEMENT MORTARS BY NONLINEAR ACOUSTIC TECHNIQUE

Application of acoustic emission to monitoring the course of the alkali-silica reaction

Using of the Ultrasonic Method for Alkali-Silica Reaction Detection in the Cement Mortar

Alkali-silica reaction (ASR) detection in concrete from frequency dependent ultrasonic attenuation

ALKALI SILICA REACTIVITY STUDY OF ACCELERATED MORTAR BAR BY MEANS OF ACOUSTIC EMISSION AND ULTRASONIC SOUNDING

Wave mixing technique for nondestructive assessment of alkali-silica reaction damage in concrete prism samples

Assessment of alkali–silica reaction damage through quantification of concrete nonlinearity

Evaluation of alkali–silica reaction damage in concrete by using acoustic emission signal features and damage rating index: damage monitoring on concrete prisms

Long-term ultrasonic monitoring of concrete affected by alkali-silica reaction

Ultrasonic Coda Wave Monitoring of Alkali-Silica Reactivity in Concrete Laboratory Prisms

Theoretical and experimental study of the nonlinear resonance vibration of cementitious materials with an application to damage characterization

Lattice Discrete Particle Modeling of acoustic nonlinearity change in accelerated alkali silica reaction (ASR) tests

Alkali-silica reaction products and cracks: X-ray micro-tomography-based analysis of their spatial-temporal evolution at a mesoscale

Microscopic investigation of building materials affected by alkali-silica reaction

Single-Impact Nonlinear Resonant Acoustic Spectroscopy for Monitoring the Progressive Alkali–Silica Reaction in Concrete

Modeling Alkali-Silica Reaction Using Image Analysis and Finite Element Analysis

Monitoring accelerated alkali-silica reaction in concrete prisms with petrography and electrical conductivity measurements

Microstructural Changes Due to Alkali-Silica Reaction during Standard Mortar Test

The use of computed tomography and scanning microscopy methods for assessing the alkaline reactivity of aggregate