Abstract:In automotive manufacturing, high strength materials, and aluminum alloys are widely used to address the requirement of ensuring a lightweight car body and correspondingly, reducing pollution. In this context of complexity of materials and structures, an optimized process design with finite element analyses (FEA) is mandatory, as well as a correct definition of the material forming limits. For this purpose, in sheet metal forming, the forming limit curve (FLC) is used. The FLC is defined by the onset of necking. The standard evaluation method according to DIN EN ISO 12004-2 is based on the cross-section method and assumes that the failure occurs due to a clear localized necking. However, this approach has its limitations, specifically in the case of brittle materials that do not exhibit a distinct necking phase. To overcome this challenge, a pattern recognition-based evaluation is proposed. Although pattern recognition and machine learning techniques have been widely employed in the medical field, few studies have investigated them in the context of analyzing metal sheet forming limits. The application of pattern recognition in metal forming is subject to the exact definition of the forming behaviors. Thereby, it is challenging to relate patterns on the strain distribution during Nakajima tests with the onset of necking for the FLC determination. Thus, the first approach was based on the crack evaluation, since this class is well-defined. However, of substantial interest is the evaluation of the general material instabilities that precede failure. Therefore, in the present study, the analysis of the material behavior during stretching is conducted in order to characterize instability classes. The results of Nakajima tests are investigated using an optical measurement system. A conventional pattern recognition approach based on texture features, considering the outcomes of expert interviews for the definition of classes is used for the FLC determination. Moreover, an analysis of the validity of the supervised learning is conducted. The results show a good prediction of the onset of necking, even for high strength materials with a recall of up to 92%. Some deviations are observed in the determination of the diffuse necking. The discrepancies of the different experts’ prognoses highlight the user-dependency of the FLC, suggesting further investigations with an data-driven approach, could be beneficial.

Localized Necking in Elastomer-Supported Metal Layers: Impact of Kinematic Hardening

Neck development in metal/elastomer bilayers under dynamic stretchings

Porous plasticity modeling of local necking in sheet metals

Neck retardation and enhanced energy absorption in metal–elastomer bilayers

Sheet metal forming limits under stretch-bending with anisotropic hardening

A Methodology for Post-Necking Analysis in Isotropic Metals

Forming Limits under Stretch-Bending Through Distortionless and Distortional Anisotropic Hardening

Investigation of the influence of plane strain constrained anisotropic plastic flow on the localized necking prediction

An Enhanced Approach for High-Strain Plasticity in Flat Anisotropic Specimens with Progressively Distorting Neck Sections

Inhibiting plastic tensile instability of non-symmetric thin-walled shell component via increasing regional metal inflow based on heterogeneous pressure-carrying medium

Analytical Study of the Effect of Material Properties on the Formability of Sheet Metals Based on the M-K Model

Effect of nonlinear strain paths on forming limits under isotropic and anisotropic hardening

Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 1: Characterization of Onset of Necking and Expert Evaluation

Theoretical failure investigation for sheet metals under hybrid stretch-bending loadings

Forming Limits of a Sheet Metal after Continuous-Bending-Under-Tension Loading

Prediction of Forming Limits for Anisotropic Materials with Nonlinear Strain Paths by an Instability Approach

Experimental analysis of strain path dependent ductile damage mechanics and forming limits

Influence of mesoscale properties on the mechanisms of plastic strain accommodation in plane strain dynamic deformation of concentric Ni-Al laminates

Formability Characterization Using Curvature and Strain-Rate-Based Limit Strain Detection Methods Applied to Marciniak, Nakazima, and Stretch-Bend Tests

Numerical prediction and experimental validation of forming limit curves of laminated half-hard aluminum sheets

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation