Abstract:Novel ethyl phenylacetate (EPA)-loaded nanocomposite microcapsules with polyurea (PU) /poly (melamine formaldehyde) (PMF) shells were facilely and fabricated: by using silica nanoparticle-stabilized oil-in-water (o/w) emulsion template and subsequent interfacial reaction and in situ polymerization. SiO2 nanoparticles absorbed at the interface between oil and water to stabilize the o/w emulsions. The oil droplets containing EPA, isophorone diisocyanate (IPDI) and tolylene 2,4-diisocyanate-terminated poly (propylene glycol) (PPG-TDI) were subsequently reacted with MF prepolymer (pre-MF) dissolved in water phases. The interfacial reaction between pre-MF and IPDI produced interior PU walls. Meanwhile, the in situ polymerization of pre-MF generated exterior PMF walls. It was found that these in/out double walls were compact together. The resulting capsules had spherical shapes and rough exterior surfaces, and could be easily isolated, dried, and redispersed in epoxy resins. The size of the produced microcapsules was dependent on the concentration of SiO2 nanoparticles. The dynamic thermal gravimetric analysis (TGA) demonstrated that the capsules showed excellent thermal stability with little weight loss when exposed at 150 °C for 2 h. Interestingly, with a double PU/PMF shell, these capsules exhibited an extra-low permeability. Moreover, these microcapsules can also demonstrate exceelent magnetic responsiveness after introducing magnetic nanoparticles inside. We believe our microcapsules could be potential candidates in microcapsule engineering, self-healing composites, and drug-carrying systems.

Preparation and Characterization of Silicone Oil/UF Resin Microcapsules as Erosion Inhibitor

Optimal Preparation and Characterization of Poly(urea–formaldehyde) Microcapsules

Effects of Synthesis Conditions for UF Prepolymer on Morphology of Electrophoretic Microcapsules

Preparation And Application Of Melamine-Urea-Formaldehyde Self-Healing Microcapsules Modified By Nano-Al2o3

Study On Preparation and Mechanism of Self-healing Poly(urea-formaldehyde) Microcapsules

Preparation of Microcapsules with Silicone Oil As Continuous Phase Using A Solvent Evaporation Method

STUDY ON THE PREPARATION TECHNICS OF EPOXY RESINS COATED POLYSTYREN SELF-REPAIR MICROCAPSULES

Preparation of uniform microcapsules with silicone oil as continuous phase in a micro-dispersion process.

Morphological study of surface-modified urea–formaldehyde microcapsules using 3-aminopropyltriethoxy silane

Preparation and Property of Silicone Oil Microcapsules and Its Waterborne Anti-Icing Coatings

Preparation and Properties of Self-healing Microcapsules Containing an UV-curable Oligomers of Silicone

Preparation and Characterization of Perfluoropolyether-Silane@Ethye Cellulose Polymeric Microcapsules

Fabrication of silicone oil microcapsules with silica shell by miniemulsion method

Polysulphone Microcapsules Containing Silicone Oil for the Removal of Toxic Volatile Organics from Water.

PREPARATION OF EXTRACTANT MICROCAPSULES BY SOLVENT EVAPORATION METHOD

Direct Preparation Process of Microcapsules by in Situ Polymerization of Urea-Formaldehyde

Effects of Microcapsules Modification on Interfacial Compatibility of Unsaturated Polyester Self-healing Composites

Versatile fabrication of nanocomposite microcapsules with controlled shell thickness and low permeability

Improving Particle Characteristic and Encapsulated Indicators of Urea–formaldehyde/epoxy Self-Healing Microcapsule by Incorporating Resorcinol

Preparation and evaluation of microcapsules containing Rimulus Cinnamon and Angelica Sinenis essential oils

Preparation and Characterization of Microcapsules for Self-Healing Material