Abstract:Novel ethyl phenylacetate (EPA)-loaded nanocomposite microcapsules with polyurea (PU) /poly (melamine formaldehyde) (PMF) shells were facilely and fabricated: by using silica nanoparticle-stabilized oil-in-water (o/w) emulsion template and subsequent interfacial reaction and in situ polymerization. SiO2 nanoparticles absorbed at the interface between oil and water to stabilize the o/w emulsions. The oil droplets containing EPA, isophorone diisocyanate (IPDI) and tolylene 2,4-diisocyanate-terminated poly (propylene glycol) (PPG-TDI) were subsequently reacted with MF prepolymer (pre-MF) dissolved in water phases. The interfacial reaction between pre-MF and IPDI produced interior PU walls. Meanwhile, the in situ polymerization of pre-MF generated exterior PMF walls. It was found that these in/out double walls were compact together. The resulting capsules had spherical shapes and rough exterior surfaces, and could be easily isolated, dried, and redispersed in epoxy resins. The size of the produced microcapsules was dependent on the concentration of SiO2 nanoparticles. The dynamic thermal gravimetric analysis (TGA) demonstrated that the capsules showed excellent thermal stability with little weight loss when exposed at 150 °C for 2 h. Interestingly, with a double PU/PMF shell, these capsules exhibited an extra-low permeability. Moreover, these microcapsules can also demonstrate exceelent magnetic responsiveness after introducing magnetic nanoparticles inside. We believe our microcapsules could be potential candidates in microcapsule engineering, self-healing composites, and drug-carrying systems.

Fabrication of silicone oil microcapsules with silica shell by miniemulsion method

Optimising the Shell Thickness-To-Radius Ratio for the Fabrication of Oil-Encapsulated Polymeric Microspheres

Preparation of Microcapsules with Silicone Oil As Continuous Phase Using A Solvent Evaporation Method

Preparation of uniform microcapsules with silicone oil as continuous phase in a micro-dispersion process.

Preparation and Property of Silicone Oil Microcapsules and Its Waterborne Anti-Icing Coatings

The Tough Microcapsules Of Acrylic Acid-Styrene-Isoprene-Styrene Quadrablock Copolymer Shell Via Pickering Emulsion Technique

Polysulphone Microcapsules Containing Silicone Oil for the Removal of Toxic Volatile Organics from Water.

Preparation of mesoporous submicrometer silica capsules via an interfacial sol-gel process in inverse miniemulsion.

Mini-Emulsification and Mini-Emulsion Polymerization of Methyl Methacrylate/Nanosilica Dipsersion

Hydroxyl terminated silicone oil as co-stabilizer for miniemulsion copolymerization of acrylate and methacryloxy(propyl)-trimethoxysilane

Fabrication method of TiO2–SiO2 hybrid capsules and their UV-protective property

Silica-shell/oil-core microcapsules with controlled shell thickness and their breakage stress.

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Surfactant-free, UV-curable core–shell microcapsules in a hydrophilic PDMS microfluidic device

Fabrication of Hollow Silica Spheres Using Droplet Templates Derived from a Miniemulsion Technique.

Preparation of microcapsules containing ionic liquids with a new solvent extraction system

Preparation and Characterization of Silicone Oil/UF Resin Microcapsules as Erosion Inhibitor

Preparation of Silica Microcapsules Containing Octadecane As Temperature-adjusting Powder

Versatile fabrication of nanocomposite microcapsules with controlled shell thickness and low permeability

Preparation of silica gel microcapsules containing lauryl alcohol

Controllable preparation of monodisperse alginate microcapsules with oil cores