Abstract:The paper considers the influence of the parameters of the plasma spraying process on the technological characteristics of multilayer coatings based on nickel-chromium, nickel-chromium-aluminum-yttrium materials, oxide ceramics, intended for operation at high temperature and additional dynamic loads. The design of plasma coatings during their application (with subsequent high-energy processing) under such conditions requires a comprehensive solution – both the use of high-quality powder ingredients and the optimization of technological parameters. The plasma process of applying powder materials has been improved to obtain the maximum values of their utilization factors. The technological characteristics that affect the properties of plasma coatings are optimized, namely: the flow rates of the plasma-forming and materials-transporting gases, the flow rate of supplied powder materials, the current and voltage of the electric arc of the plasma torch, the distance from the plasma torch nozzle exit to the substrate. The paper presents the results of studies of the structure of coatings, performed using scanning electron microscopy. Their analysis has made it possible to form general regularities obtained by the action of radiation of compression plasma flows on coatings formed by air plasma. The considered structures are created using the processes of melting, compaction and high-speed cooling of plasma coatings. The main optimization indicators are the maximum local compaction and spillage of the obtained compositions with the absence of defects and destruction from the impact of compression plasma flows. The main effect during the action of radiation of a compression plasma flow on previously formed coatings is thermal. It contributes heating of the near-surface layer. When the coating is exposed to radiation of compression plasma flows, a remelted layer of oxides with a thickness of about 12–15 μm is created, smoothing the relief of the formed surface and creating a network of cracks on the surface, diverging into the depth of the coating. The liquid-phase processes occurring in the molten phase of the near-surface layers after exposure to compression plasma radiation change the structure of the layers and contribute to the modification of their mechanical properties. By smoothing the surface, increasing the density of the surface crystallized layer and minimizing macro-defects – pores or macrocracks – the mechanical characteristics of the coatings increase.

Effects of low pressure radio frequency discharge on the physical and mechanical characteristics and chemical composition of diffusion coating on a surface of complex configuration details

The study of interaction of the high energetic plasma and electron pulses with multicomponent alloy surface

Particle Surface Modification in the Near-Electrode Region of an RF Discharge

Plasma Processing of AISI 304 Stainless Steel Using Radio Frequency Hollow Cathode Discharge

Low-pressure Planar Magnetron Discharge for Surface Deposition and Nanofabrication

Influence of discharge and jet flow coupling on atmospheric pressure plasma homogeneity

Plasma-target surface interaction during non-equilibrium plasma irradiation at atmospheric pressure: Generation of dusty plasma

Studies on the electrical characteristics of a radio-frequency atmospheric-pressure plasma jet array

Modeling and experimental comparison of pulsed-DC driven low-pressure plasma discharge in a metal tube

Acoustic Features of the Impact of Laser Pulses on Metal-Ceramic Carbide Alloy Surface

Chromium arc plasma characterization, structure and properties of CrN coatings prepared by vacuum arc evaporation

Control of electron dynamics, radical and metastable species generation in atmospheric pressure RF plasma jets by Voltage Waveform Tailoring

Effects of Capacitively-Coupled Radio-Frequency Discharge on Operation Voltage in Magnetron Sputtering

Surface modification of coatings based on Ni-Cr-Al by pulsed plasma treatment

Discharge characteristics of an atmospheric pressure radio-frequency plasma jet

Low-Current Discharge in a Flow of Atmospheric-Pressure Argon Under the Formation of Metal Atoms: Electric and Optical Characteristics

Surface treatment of metals using an atmospheric pressure plasma jet and their surface characteristics

Multi-Layers Composite Plasma Coatings Based on Oxide Ceramics and M-Croll

Surface Treatment by Dielectric Barrier Discharge with Wire Mesh Electrodes

Effects of the Shielding Cylinder and Substrate on the Characteristics of an Argon Radio-Frequency Atmospheric Glow Discharge Plasma Jet

Experimental analysis of surface integrity in electro-discharge coating process