Abstract:A high density of voids is expected to form in irradiated face centered cubic metals, which can have a negative impact on the ductility and cause an increasing strength. Molecular dynamics simulations of the interaction between gliding dissociated edge dislocations and voids in nickel have been performed to investigate the effect of the void size, the corresponding detachment mechanism, and dynamic effects of the dislocation on the obstacle strength. As expected, the void strength is observed to increase with increasing void size. The dislocation interaction and detachment process are determined by the applied shear stress, the repulsive interaction between partial dislocations and the image interaction between the partial dislocations and the void surface. For voids with a diameter smaller than 2nm, the repulsive stress between the partials dominates, resulting in the detachment of the leading partial from the void while the trailing partial remains pinned. Consequently, the detachment process and obstacle strength are controlled by the trailing partial. For voids with a diameter larger than 2nm, the attraction between the dissociated dislocations and the void dominates causing the detachment process and void strength to be influenced by both partials individually. This transition in detachment process at a void diameter of 2nm is consistent with other research, and this transition is shown to be dependent on the void separation distance along the dislocation line and the dissociation distance between the partials, thus the stacking fault energy. Finally, by comparing the quasi-static and dynamic simulation results, an estimate for the static detachment stress is proposed in terms of the dynamic detachment stress and the dislocation velocity after detachment.

Molecular dynamics study of self-diffusion in the core of a screw dislocation in face centered cubic crystals

Mechanism of intrinsic diffusion in the core of screw dislocations in FCC metals – A molecular dynamics study

Using Molecular Dynamic Simulation to Understand the Deformation Mechanism in Cu, Ni, and Equimolar Cu-Ni Polycrystalline Alloys

Molecular Dynamics Simulations of the Thermally and Stress-Activated Glide of a ⟨0001⟩{11̅00} Screw Dislocation in AlN

Atomistic Study of Fundamental Character and Motion of Dislocations in Intermetallic Al2Cu

Self-diffusion in the Intermetallic Compounds NiAl and Ni3Al: an Embedded Atom Method Study

Molecular dynamics simulations of motion of edge and screw dislocations in a metal

The Interaction Mechanism of Screw Dislocations with Coherent Twin Boundaries in Different Face-Centred Cubic Metals

Molecular Dynamics Simulation of the Interaction between Cracks in Single-Crystal Aluminum

Deformation behaviors in light of dislocation core characteristics with respect to the compositional-dependent misfit potentials of aluminum alloys

Self-diffusion of Ni in the Intermetallic Compound Ni3Al

Atomistic Investigation of Elementary Dislocation Properties Influencing Mechanical Behaviour of $Cr_{15}Fe_{46}Mn_{17}Ni_{22}$ alloy and $Cr_{20}Fe_{70}Ni_{10}$ alloy

Atomistic and Continuum Study of Interactions Between Super-Screw Dislocations and Coherent Twin Boundaries in L12-structured Ni3Al

Interactions between screw dislocation and twin boundary in high-entropy alloy: A molecular dynamic study

Molecular dynamics simulations of dislocation interaction with voids in nickel

The Interaction Mechanisms Between Dislocations and Nano-Precipitates in CuFe Alloys: a Molecular Dynamic Simulation

Magnetism-Driven Dislocation Dissociation, Cross Slip, And Mobility In Nial

Molecular Dynamics Study on the Interactions of 1/2[110] Edge Dislocations with Voids and Ni3Al Precipitates in FCC Ni

Defect-induced inhomogeneous atomic environments in complex concentrated alloys

Atomistic Simulations for the Evolution of a U-shaped Dislocation in Fcc Al

Core Structure and Mobility of Edge Dislocations in Face-Centered-cubic Chemically Complex NiCoFe and NiCoFeCu Equiatomic Solid-Solution Alloys