Abstract:This study focused on the development of Fe–Co/kaolin catalyst by a wet impregnation method. Response surface methodology was used to study the influence of operating variables such as drying temperature, drying time, mass of support and stirring speed on the yield of the catalyst. The catalyst composite at best synthesis conditions was then calcined in an oven at varied temperature and time using 22 factorial design of experiment. The catalyst with optimum surface area was then utilized to grow carbon nanofiber (CNF) in a chemical vapour deposition (CVD) reactor. Both the catalyst and CNF were characterized using high-resolution scanning electron microscopy, high-resolution transmission electron microscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy. On the influence of operating variables on the yield of catalyst, the results showed that an optimum yield of 96.51% catalyst was obtained at the following operating conditions: drying time (10 h), drying temperature (110 °C), stirring speed (100 rpm) and mass of support (9 g). Statistical analysis revealed the existence of significant interactive effects of the variables on the yield of the catalyst. The HRSEM/XRD/BET/TGA analysis revealed that the particles are well dispersed on the support, with high surface area (376.5 m2/g) and thermally stable (330.88 °C). The influence of operating parameters on the yield of CNF was also investigated and the results revealed an optimum yield of 348% CNF at the following operating conditions: reaction temperature (600 °C), reaction time (40 min), argon flow rate (1416 mL/min) and acetylene/hydrogen flow rate (1416 mL/min). It was found from statistical analysis that the reaction temperature and acetylene/hydrogen flow rates exerted significant effect on the CNF yield than the other factors. The contour and surface plots bi-factor interaction indicated functional relationship between the response and the experimental factors. The characterization results showed that the synthesized CNF is thermally stable, twisted and highly crystalline and contain surface functional groups. It can be inferred from the results of various analyses that the developed catalyst is suitable for CNF growth in a CVD reactor.

Growth of Carbon Nanofibers in Phenolic Resin for Carbon-Contained Refractory Using Different Catalysts

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Study on improving the high-temperature oxidation resistance of pyrolytic carbons of phenolic resin binder by in-situ formation of carbon nanotubes

Optimization of bi-metallic (Fe–Co) catalyst on kaolin support for carbon nanofiber growth in a CVD reactor

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Improving the strength and oxidation resistance of phenolic resin derived pyrolytic carbons via Cu-catalyzed in-situ formation of SiC@SiO2

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Microstructure, Mechanical Property and Thermal Conductivity of Porous TiCO Ceramic Fabricated by In Situ Carbothermal Reduction of Phenolic Resin and Titania

Preparation of Carbon Nanofibers over Carbon Nanotube-Nickel Catalyst in Propylene Decomposition

Catalytic gasification of phenol in supercritical water over bimetallic Co–Ni/AC catalyst

Co-pyrolysis of Chinese herb residue and polypropylene over Ni, Fe, Co and Cu/AC: Co-production and formation mechanism of carbon nanomaterials, liquid oil and pyrolysis gas

Shaping Phenolic Resin-Coated ZIF-67 to Millimeter-Scale Co/N Carbon Beads for Efficient Peroxymonosulfate Activation

Catalytic Growth of Very Long Composite Nanofibres Containing Co (or Fe, Ni), SrO and Trace Carbon

Effects of different catalysts on performance of self-bonded SiC refractories

Catalytic co-pyrolysis of waste tea residue and waste plastics to carbon nanomaterials: catalyst support, reaction temperature and product application

Promoting effects of Fe-Ni alloy on co-production of H2 and carbon nanotubes during steam reforming of biomass tar over Ni-Fe/α-Al2O3

Catalytic transfer hydrodeoxygenation of guaiacol to phenol with formic acid over N-doped carbon encapsulated non-noble alloy catalysts

Lanthanum-Modified MCF-Derived Nickel Phyllosilicate Catalyst for Enhanced CO2 Methanation: A Comprehensive Study

Tracing the Active Phase and Dynamics for Carbon Nanofiber Growth on Nickel Catalyst Using Environmental Transmission Electron Microscopy

Micro-Nano Carbon Structures with Platelet, Glassy and Tube-Like Morphologies

Sulfur and nitrogen co-doped carbon nanotube membrane coating on paper-like sintered stainless steel fibres for catalytic phenol degradation in structured fixed-bed reactor