Abstract:Lithium-ion battery (LIB) is one of the most promising power sources for electronic devices and electric vehicles because of their high energy densities and relatively long lifetime. Graphite is widely used as the anode electrode material in the state-of-the-art LIBs. However, a graphite anode is usually only compatible with an ethylene carbonate (EC)-based electrolyte. In a propylene carbonate (PC)-containing electrolyte, which is advantageous over the EC-based counterpart due to its wider temperature range and higher low-temperature conductivity, the graphite anode experiences significant exfoliation problem during the initial lithium intercalation step. Thus a PC-containing electrolyte cannot be used in LIBs with graphite as the anode unless some solid electrolyte interphase (SEI) film-formation additives are included in the electrolytes. Usually these additives are electrochemically reduced predominantly on the graphite anode surface before PC is intercalated and reduced. Such additives normally contain unsaturated bonds or are unstable cyclic compounds, for instance, vinylene carbonate (VC) and fluoroethylene carbonate (FEC). They play an important role in the protection of the graphitic anode structure from destruction by PC reduction. However, these additives also have certain shortcomings. Usually these additives result in a thick SEI layer, which significantly reduces the rate capability and limits low-temperature performance and cycling stability at elevated temperatures through additional impedance and poor thermal stability. Recently, we developed a novel electrolyte additive that can suppress the PC reductive decomposition on the graphite anode without forming a thick and resistant SEI film. As shown in Figure 1, this additive can not only significantly improve the compatibility between graphite anode and PC-containing electrolyte, but also exhibit superior rate capability and excellent cycling stability at elevated temperatures.This new electrolyte additive can be applied to LIBs and other electrochemical systems using PC-containing electrolytes and graphite anodes. In this work, we systematically investigated the mechanism of the SEI formation by this additive and the protection of graphite anode in PC-containing electrolytes. Several techniques, including computational calculations and simulations, 17O nuclear magnetic resonance (NMR), “soft” electrospray ionization mass spectrometry (ESI-MS), time of flight second ion mass spectrometry (ToF-SIMS), etc. have been used to reveal the reasons behind the compatibility and stability of graphite anode in PC-containing electrolytes with this new additive. The details of the results will be reported at the meeting. Acknowledgements This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technology of the U.S. Department of Energy (DOE). The 17O NMR and ToF-SIMS measurements were performed at the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at PNNL. Figure 1

Ethylene Sulfite as Electrolyte Additive for Lithium‐Ion Cells with Graphitic Anodes

Ethylene Sulfite as Electrolyte Additive for Lithium‐Ion Cells with Graphitic Anodes

The Role of Carbonate and Sulfite Additives in Propylene Carbonate-Based Electrolytes on the Formation of SEI Layers at Graphitic Li-Ion Battery Anodes

Ethylene Carbonate‐Free Propylene Carbonate‐Based Electrolytes with Excellent Electrochemical Compatibility for Li‐Ion Batteries through Engineering Electrolyte Solvation Structure

Additives to propylene carbonate-based electrolytes for lithium-ion capacitors

Molecular Adsorption‐Induced Interfacial Solvation Regulation to Stabilize Graphite Anode in Ethylene Carbonate‐Free Electrolytes

Propylene sulfite as film-forming electrolyte additive in lithium ion batteries

Comprehensive Understanding of Reduction Mechanisms of Ethylene Sulfite in EC-Based Lithium-Ion Batteries

A study on sulfites for lithium-ion battery electrolytes

Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

The reductive mechanism of ethylene sulfite as solid electrolyte interphase film-forming additive for lithium ion battery

Effects of propylene carbonate content in CsPF6-containing electrolytes on the enhanced performances of graphite electrode for lithium-ion batteries

Additives-containing functional electrolytes for suppressing electrolyte decomposition in lithium-ion batteries

Butylene sulfite as a film-forming additive to propylene carbonate-based electrolytes for lithium ion batteries

Vinyl ethylene sulfite as a new additive in propylene carbonate-based electrolyte for lithium ion batteries

Behind the Stability of Graphite Anode in PC-Containing Electrolytes with a New Additive

SEI-Film-Suppression Additive for Enhancing Compatibility and Electrochemical Stability of Graphite Anode in PC-Based Electrolytes

Succinic Anhydride as an Enabler in Ethylene Carbonate-Free Linear Alkyl Carbonate Electrolytes for High Voltage Li-Ion Cells

Ethylene Carbonate-Free Electrolytes Based on Ethyl Methyl Carbonate for High-Voltage LiCoO2/Si-Graphite Lithium-Ion Batteries

The Study of Phenyl Sulfone As an Additive of Propylene Carbonate Based Electrolyte Solution

Reversible Cycling of Graphite Electrodes in Propylene Carbonate Electrolytes Enabled by Ethyl Isothiocyanate