Abstract:Lithium-ion battery (LIB) is one of the most promising power sources for electronic devices and electric vehicles because of their high energy densities and relatively long lifetime. Graphite is widely used as the anode electrode material in the state-of-the-art LIBs. However, a graphite anode is usually only compatible with an ethylene carbonate (EC)-based electrolyte. In a propylene carbonate (PC)-containing electrolyte, which is advantageous over the EC-based counterpart due to its wider temperature range and higher low-temperature conductivity, the graphite anode experiences significant exfoliation problem during the initial lithium intercalation step. Thus a PC-containing electrolyte cannot be used in LIBs with graphite as the anode unless some solid electrolyte interphase (SEI) film-formation additives are included in the electrolytes. Usually these additives are electrochemically reduced predominantly on the graphite anode surface before PC is intercalated and reduced. Such additives normally contain unsaturated bonds or are unstable cyclic compounds, for instance, vinylene carbonate (VC) and fluoroethylene carbonate (FEC). They play an important role in the protection of the graphitic anode structure from destruction by PC reduction. However, these additives also have certain shortcomings. Usually these additives result in a thick SEI layer, which significantly reduces the rate capability and limits low-temperature performance and cycling stability at elevated temperatures through additional impedance and poor thermal stability. Recently, we developed a novel electrolyte additive that can suppress the PC reductive decomposition on the graphite anode without forming a thick and resistant SEI film. As shown in Figure 1, this additive can not only significantly improve the compatibility between graphite anode and PC-containing electrolyte, but also exhibit superior rate capability and excellent cycling stability at elevated temperatures.This new electrolyte additive can be applied to LIBs and other electrochemical systems using PC-containing electrolytes and graphite anodes. In this work, we systematically investigated the mechanism of the SEI formation by this additive and the protection of graphite anode in PC-containing electrolytes. Several techniques, including computational calculations and simulations, 17O nuclear magnetic resonance (NMR), “soft” electrospray ionization mass spectrometry (ESI-MS), time of flight second ion mass spectrometry (ToF-SIMS), etc. have been used to reveal the reasons behind the compatibility and stability of graphite anode in PC-containing electrolytes with this new additive. The details of the results will be reported at the meeting. Acknowledgements This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technology of the U.S. Department of Energy (DOE). The 17O NMR and ToF-SIMS measurements were performed at the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at PNNL. Figure 1

The Study of Phenyl Sulfone As an Additive of Propylene Carbonate Based Electrolyte Solution

Propylene sulfite as film-forming electrolyte additive in lithium ion batteries

Phenyl Tris-2-methoxydiethoxy Silane As an Additive to PC-based Electrolytes for Lithium-Ion Batteries

Ethylene Sulfite as Electrolyte Additive for Lithium‐Ion Cells with Graphitic Anodes

Additives to propylene carbonate-based electrolytes for lithium-ion capacitors

The Role of Carbonate and Sulfite Additives in Propylene Carbonate-Based Electrolytes on the Formation of SEI Layers at Graphitic Li-Ion Battery Anodes

Butylene sulfite as a film-forming additive to propylene carbonate-based electrolytes for lithium ion batteries

Effects of propylene carbonate content in CsPF6-containing electrolytes on the enhanced performances of graphite electrode for lithium-ion batteries

A study on sulfites for lithium-ion battery electrolytes

Partially Fluorinated Ether As an Electrolyte Additive to Modify Electrode Surface and Suppress Dissolution of Polysulfides in Li-S Batteries

Phosphorous Pentasulfide As A Novel Additive for High-Performance Lithium-Sulfur Batteries

Ethylene Carbonate‐Free Propylene Carbonate‐Based Electrolytes with Excellent Electrochemical Compatibility for Li‐Ion Batteries through Engineering Electrolyte Solvation Structure

Comparative study of 1,3-propane sultone, prop-1-ene-1,3-sultone and ethylene sulfate as film-forming additives for sodium ion batteries

Behind the Stability of Graphite Anode in PC-Containing Electrolytes with a New Additive

Molecular Adsorption‐Induced Interfacial Solvation Regulation to Stabilize Graphite Anode in Ethylene Carbonate‐Free Electrolytes

Effect of propane sultone on elevated temperature performance of anode and cathode materials in lithium-ion batteries

SEI-Film-Suppression Additive for Enhancing Compatibility and Electrochemical Stability of Graphite Anode in PC-Based Electrolytes

The Role of Cesium Cation in Controlling Interphasial Chemistry on Graphite Anode in Propylene Carbonate-Rich Electrolytes.

Role of 1, 3-Propane Sultone and Vinylene Carbonate in Solid Electrolyte Interface (SEI) Formation and Gas Generation

Effect of 1,3-Propane Sultone on the Formation of Solid Electrolyte Interphase at Li-Ion Battery Anode Surface: A First-Principles Study