Abstract:Abstract A novel approach using diffusive gradients in thin films (DGT) with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) for two-dimensional mapping of elemental solute release at sub-picogram levels during aqueous corrosion of Al alloys is presented. Evaluation of different DGT gels with mixed micro-sized binding phases (polyacrylamide-Chelex-Metsorb, polyurethane (PU)-Chelex-Metsorb, PU-Chelex-Zr(OH) 4 ) demonstrated the superior performance of PU gels due to their tear-proof handling, low shrinkage, and compliance with green chemistry. DGT devices containing PU-Chelex-Zr(OH) 4 gels, which have not been characterized for Al sampling before, showed quantitative uptake of Al, Zn, and Cu solutes over time ( t = 4–48 h) with higher Al capacity ( Γ DGT = 6.25 μg cm −2 ) than different gels. Application of PU-Chelex-Zr(OH) 4 gels on a high-strength Al-Cu alloy (Al2219) exposed to NaCl ( w = 1.5%, pH = 4.5, T = 21 °C) for 15 min in a novel piston-type configuration revealed reproducible patterns of Al and Zn co-solubilization with a spatial expansion ranging between 50 and 1000 μm. This observation, together with complementary solid-state data from secondary electron microscopy with energy-dispersive X-ray spectroscopy, showed the presence of localized pitting corrosion at the material surface. Detection limits for total solute masses of Al, Zn, and Cu were ≤0.72 pg, ≤8.38 pg, and ≤0.12 pg, respectively, for an area of 0.01 mm 2 , demonstrating the method’s unique capability to localize and quantify corrosion processes at ultra-trace levels and high resolution. Our study advances the assessment of Al alloy degradation in aqueous environments, supporting the design of corrosion-resistant materials for fostering technological safety and sustainability. Graphical Abstract

Using real-time UV–visible spectrophotometer to assess an Al–Zn–Mg–Cu alloy's dissolution in acidic solution

Investigating the real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS

Ex Situ Tem Observation of Localized Attack on Aa 6061

On-line Electrolytic Dissolution of Alloys and Multi-Element Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

Direct Observation of Atomic-Scale Origins of Local Dissolution in Al-Cu-Mg Alloys

Micro X-ray fluorescence (μ-XRF) methodology for quantitative elemental imaging of Al-Zn-Mg-Cu alloys with varying chemical compositions

Dynamic Investigation of Cu50at%Au (001) Alloy Film Nano-oxidation by in Situ UHV TEM

In Situ Observation of the Degradation Behavior and the Systematic Investigation of Corrosion Mechanism in AZ31 Alloy

In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment

In Situ Atomic Force Microscopy Observations of the Corrosion Behavior of Aluminum‐Copper Alloys

Local corrosion mechanism of an Al-Zn-Mg-Cu alloy in oxygenated chloride solution: Cathode activity of quenching-induced η precipitates

ONLINE ELECTROLYTIC DISSOLUTION OF SOLID METAL SAMPLES AND DETERMINATION OF COPPER IN ALUMINUM-ALLOYS BY FLAME ATOMIC-ABSORPTION SPECTROMETRY

Mapping elemental solutes at sub-picogram levels during aqueous corrosion of Al alloys using diffusive gradients in thin films (DGT) with LA-ICP-MS

In-situ X-ray diffraction study on dealloying: A scenario of a Cu90Au10 alloy

Microstructure Evolution and the Resulted Influence on Localized Corrosion in Al-Zn-Mg-Cu Alloy during Non-Isothermal Ageing

Oxide degradation precedes additively manufactured Ti-6Al-4V selective dissolution: An unsupervised machine learning correlation of impedance and dissolution compared to Ti-29Nb-21Zr

Electrochemical Impedance Spectroscopy Analysis on Aluminum Alloys in EXCO Solution

How solute atoms control aqueous corrosion of Al-alloys

Corrosion Behavior of Two Heat Treatment Al-Zn-Mg-Cu Alloys in Different Intergranular Corrosion Solution

Electrochemical Impedance Spectroscopy Analysis on the Electrochemical Dissolution of Aluminum in an Alkaline Solution

Investigation on the electrochemical evolution of the Cu-sn-Pb ternary alloy covered with CuCl in a simulated atmospheric environment