Abstract:ConspectusBuilding rechargeable batteries for subzero temperature application is highly demanding for various specific applications including electric vehicles, grid energy storage, defense/space/subsea explorations, and so forth. Commercialized nonaqueous lithium ion batteries generally adapt to a temperature above -20 °C, which cannot well meet the requirements under colder conditions. Certain improvements have been achieved with nascent materials and electrolyte systems but have mainly been restrained to discharge and within a small rate at temperatures above -40 °C. Moreover, the recharging process of batteries based on the graphite anode still faces huge challenges from the simultaneous Li+ intercalation and potential Li stripping at subzero temperatures. Revealing the temperature-dependent evolution of physicochemical and electrochemical properties will greatly benefit our understanding of the limiting factors at low temperature, which is of significant importance.Herein, we dissect the ion movements in the liquid electrolyte and solid electrode as well as their interphase to analyze the temperature effect on Li+-diffusion behavior during charging/discharging processes. An electrolyte is the vital factor, and its ionic conductivity guarantees the smooth operation of the battery. However, it is the sluggish diffusion in the solid, especially the charge transfer at the solid electrolyte/electrode interfaces (SEI), that greatly limits the kinetics at low temperature. Many strategies have been put forward to tame electrolytes for low-temperature application. From a macroscopic point of view, multiple solvents are mixed to adjust the liquid temperature range and viscosity. With respect to the microscopic nature, research is focusing on the solvation structure by formulating the ratio of Li+ ions to solvent molecules. The binding energy of the Li+-solvent complex is crucial for the desolvation process at low temperature, which is manipulated with fluorinated solvents or other weakly solvating electrolytes. On the basis of an optimized electrolyte, electrodes and their reaction mechanism need to be coupled carefully because different materials show totally different responses to temperature change. To avoid the sluggish desolvation process or slow diffusion in the bulk intercalation compounds, several kinds of materials are summarized for low temperature use. The intercalation pseudocapacitive behavior can compensate for the kinetics to some extent, and a metal anode is a good candidate for replacing a graphite anode to build high-energy-density batteries at subzero temperature. It is also a wise choice to develop nascent battery chemistry based on the co-intercalation of solvent molecules into electrodes. Furthermore, the interfacial resistance contributes a lot at low temperature, which need be modified to accelerate the Li+ diffusion across the film. This will be linked to the electrolyte, exactly speaking, the solvation structure, to regulate the organic and inorganic components as well as the structure. Although it is difficult to investigate SEI on a graphite anode owing to its poor performance at low temperature, great efforts on Li metal anodes have offered some valuable information as reference. It is worth mentioning that the improvement in low-temperature performance calls for not only a change in the single composition but also the synergetic effect of each part in the whole battery. The elementary studies covered in this account could be taken as insight into some key strategies that help advance the low-temperature battery chemistry.

Superior Low-Temperature All-Solid-State Battery Enabled by High-Ionic-Conductivity and Low-Energy-Barrier Interface

Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na3SbS4 at Extremely Low Temperatures

Ultraconformal chemo-mechanical stable cathode interface for high-performance all-solid-state batteries at wide temperatures

Multistage Bridge Engineering for Electrolyte and Interface Enables Quasi-Solid Batteries to Operate at -40°C

Boosting the energy density of sulfide-based all-solid-state batteries at low temperatures by charging to high voltages up to 6 V

Constructing Ternary Hybrid Interface with Rapid Li+ Conductivity to Enable Subzero-Temperature Si-C||LCO Pouch Cell at -40℃

Regulating Electronic Conductivity at Cathode Interface for Low‐Temperature Halide‐Based All‐Solid‐State Batteries

Ion-Solvent Interplay in Concentrated Electrolytes Enables Subzero Temperature Li-Ion Battery Operations.

Li+-Desolvation Dictating Lithium-Ion Battery's Low-Temperature Performances

Promoting Rechargeable Batteries Operated at Low Temperature

In Situ Fabricated Quasi‐Solid Polymer Electrolyte for High‐Energy‐Density Lithium Metal Battery Capable of Subzero Operation

Recent advances in designing solid-state electrolytes to reduce the work temperature of lithium batteries

Cold sintering, enabling a route to co-sinter an all-solid-state lithium-ion battery

Monolithic Interphase Enables Fast Kinetics for High‐Performance Sodium‐Ion Batteries at Subzero Temperature

Electrolyte Design for Low-Temperature Li-Metal Batteries: Challenges and Prospects

Superionic Conduction and Interfacial Properties of the Low Temperature Phase Li7P2S8Br0.5I0.5

Interface Aspects in All‐Solid‐State Li‐Based Batteries Reviewed

Tuning Solid Interfaces via Varying Electrolyte Distributions Enables High‐Performance Solid‐State Batteries

Low temperature sintering of fully inorganic all-solid-state batteries – Impact of interfaces on full cell performance

All-Solid-State Lithium Metal Batteries Enabled by Solid Electrolytes with Low-Temperature Processability

Current challenges and progress in anode/electrolyte interfaces of all-solid-state lithium batteries