Electro-Chemo-Mechanical Study of Cathode-Interface-Engineered All-Solid-State Lithium Batteries
Longlong Wang
DOI: https://doi.org/10.1149/ma2023-024513mtgabs
2023-12-22
ECS Meeting Abstracts
Abstract:All-solid-state lithium batteries (ASSLBs) have been regarded as one of the most promising next-generation batteries in terms of their superior safety and great potential to meet the requirements of high energy and power density. 1 However, the performance of ASSLBs based on even state-of-the-art solid electrolytes (SEs) with a high room-temperature ion conductivity of 10 −2 S · cm −1 is still inferior to that of commercially available LIBs, because fast solid electrode/electrolyte interfacial lithium-ion transport remains a vital challenge in ASSLBs. 2 The sluggish lithium-ion transport across the solid electrode/electrolyte interface mainly results from the electro-chemo-mechanical degradation, such as the space charge layer (SCL), interface reaction generating ionically resistive products, and poor physical contact. 3,4 On the cathode side, coating high-voltage cathodes with chemically compatible and stable buffering layers with high ionic conductivity but low electronic conductivity has been widely confirmed to be an effective approach to overcome these problems.However, a mechanistic understanding of the coating functionality remains unresolved, and there is still much room for improvement regarding the methodology and associated material properties. 5 Here, from electro-chemo-mechanical perspectives, we have fully studied the improvement mechanism of cathode interface engineering for ASSLBs based on the complementary analyses including calculations ( e.g. , first-principles, finite element methods), in-situ ( e.g. , differential phase contrast scanning transmission electron microscopy (DPC-STEM), Raman, electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), galvanostatic intermittent titration technique (GITT)) and ex-situ (X-ray absorption spectra (XAS), X-ray photoelectron spectroscopy (XPS), focused-ion beam scanning electron microscopy (FIB-SEM)) characterizations. We find that discontinuous ferroelectric BaTiO 3 coating can effectively suppress the SCL formation and lead to fast continuous interfacial lithium-ion conduction pathways, thus significantly improving the interfacial migration kinetics between cathode materials and the sulfide SEs. 6 The bidirectionally compatible NASICON-type Li x Zr 2 (PO 4 ) 3 (LZPO) buffering layer enables the high-voltage cathode interface (4.5 V LiCoO 2 /Li 6 PS 5 Cl) with high chemical/electrochemical stability and fast Li-ion transport dynamics. 7 Additionally, the high Young’s modulus of the coating layer ( e.g. , LZPO) can remarkably decrease stress inside cathodes and prevent cathode/SE interface separation, which is beneficial to mitigate microcracks in cathodes and cathode/SE interface contact loss, respectively. 8 We believe these findings will help advance the fundamental scientific understanding of the coating functionality and the interfacial lithium-ion transport mechanism in ASSLBs, thus shed light on rational electrode/electrolyte interface design for high-rate performance ASSLBs. References Janek, J. & Zeier, W. G. A solid future for battery development. Nat. Energy 1 , 16141 (2016). Janek, J. & Zeier, W. G. Challenges in speeding up solid-state battery development. Nat. Energy , doi:10.1038/s41560-023-01208-9 (2023). Banerjee, A., Wang, X., Fang, C., Wu, E. A. & Meng, Y. S. Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes. Chem. Rev. 120 , 6878–6933 (2020). Chen, R., Li, Q., Yu, X., Chen, L. & Li, H. Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces. Chem. Rev. 120 , 6820–6877 (2020). Culver, S. P., Koerver, R., Zeier, W. G. & Janek, J. On the functionality of coatings for cathode active materials in thiophosphate-based all-solid-state batteries. Adv. Energy Mater. 9 , 1900626 (2019). Wang, L. et al. In-situ visualization of the space-charge-layer effect on interfacial lithium-ion transport in all-solid-state batteries. Nat. Commun. 11 , 5889 (2020). Wang, L. et al. Bidirectionally compatible buffering layer enables highly stable and conductive interface for 4.5 V sulfide-based all-solid-state lithium batteries. Adv. Energy Mater. 11 , 2100881 (2021). Sun, X. et al. A Bifunctional Chemomechanics Strategy To Suppress Electrochemo-Mechanical Failure of Ni-Rich Cathodes for All-Solid-State Lithium Batteries. ACS Appl. Mater. Interfaces 14 , 17674–17681 (2022).