Abstract:Motivated by the global rare earth (RE) criticality, the utilization of abundant Ce and Y has attracted tremendous interests in the Nd-Fe-B community. Although the Y substitution can enhance the thermal stability of Nd-Ce-Fe-B magnet, the room-temperature coercivity is lowered drastically, which remains a challenging hurdle. Considering the equivalent intrinsic HA between Ce2Fe14B and Y2Fe14B compound, there is an intriguing possibility of achieving the balanced contributions from Y substitution on the improved coercivity and thermal stability of Nd-Ce-Y-Fe-B magnets simultaneously. Inspired by this possibility, a series of [Nd0.5(Ce1-xYx)0.5]30.5Fe68.5B1.0 melt-spun ribbons (x = 0–0.5, wt%) are prepared through adjusting the Ce/Y ratio in present work. Results show that maximized room-temperature coercivity Hcj of 12.0 ~12.2 kOe, together with preferable temperature coefficient α of −0.17 ~ −0.16%/K and β of −0.37 ~ −0.35%/K within 293–393 K interval are acquired at the optimal Y content (x = 0.1 and 0.2). Above outstanding combination of coercivity and thermal stability are the highest values reported so far upon 50 wt% Ce-Y substitution for Nd, which is ascribed to the intrinsic contribution from Y replacement for Ce in 2:14:1 lattice, as well as the microstructural advantages from refined RE2Fe14B grain and continuous RE-rich grain boundary layer However, excessive Y substitution leads to dramatic grain growth and weakened exchanging coupling effect, drastically deteriorating the coercivity and remanence, despite the fact that both α and β are continually improved. Above findings shed new light on developing resource-saving Nd-Ce-Y-Fe-B permanent magnets with high synergy of coercivity and thermal stability.

Enhanced maximum energy product of (Sm1–Y )2Fe17N caused by abundant yttrium doping

Promoting the La Solution in 2:14:1-Type Compound: Resultant Chemical Deviation and Microstructural Nanoheterogeneity

Phase structure evolution and its effect on magnetic and mechanical properties of B-doped Sm 2 Co 17 -type magnets with high Fe content

Fundamental Properties of Melt-Spun Stoichiometric Y2Fe14B Alloy and the Advantages of Nd Substitution

Enhanced Magnetic Properties Of Disordered Rhombohedral 2 : 17 Type Alloys

High energy product in mechanically alloyed ThMn12-type compound with exchange coupling effect

Study of the Anisotropic Sm2Fe17N3 Powders with High Performance

Effects of Sm Content on the Phase Structure, Microstructure and Magnetic Properties of the Sm Zr0.2(Fe0·8Co0.2)11.5Ti0.5 (x=0.8–1.4) Alloys

Increases of coercivity of Sm2Fe17Nx(x is about 3.1) magnetic powder passivated by phosphoric acid

Formation Of Disordered Th2zn17-Type With Ti And B Additions And Hard Magnetic Properties Of Their Nitrides

Performance improvement and element segregation behavior in Y substituted nanocrystalline (La,Ce)–Fe–B permanent magnetic alloys without critical RE elements

Effect of Nb content on Sm2Fe17−xNbx and its nitrides prepared by reduction-diffusion method

Effects of (Nd, Pr)-Hx addition on the coercivity of Nd-Ce-Y-Fe-B sintered magnet

Microstructure evolution and metallurgical behavior of (Y/RE)2Fe14B sintered magnets (RE = Nd, Tb)

Effect of Nitrogen Content in Magnetic Properties of Sm/sub 2/fe/sub 17/n/sub X/ and SmFe/sub 5/n/sub Y/ Alloys

Magnetic Properties of the Anisotropic MnBi/Sm2Fe17Nx Hybrid Magnet

A practical method to enhance the properties of Pr/Nd-lean sintered RE-Fe-B magnets: high entropy design for RE 2 Fe 14 B

High synergy of coercivity and thermal stability in resource-saving Nd-Ce-Y-Fe-B melt-spun ribbons

Magnetic Properties of Sm2(Fe1−xCox)17C and Y2(Fe1−xCox)17C

Magnetostrictions of Sm<formula formulatype="inline"><tex Notation="TeX">$_{2}$</tex></formula>Fe<formula formulatype="inline"><tex Notation="TeX">$_{17}$</tex></formula> and Sm<formula formulatype="inline"><tex Notation="TeX">$_{2}$</tex></formula>Fe<formula formulatype="inline"><tex Notation="TeX"

Phase Precipitation and Magnetic Properties of Melt-Spun Ternary Gd 2 Fe 14 B Alloy and Advantages of Gadolinium Substitution in Y 2 Fe 14 B Alloy