Abstract:Purpose. It has been reported clinically that rupture or dissections in thoracic aortic aneurysms (TAA) often occur due to hypertension which may be modelled with sudden increase of peripheral resistance, inducing acute changes of blood volumes in the aorta. There is clinical evidence that more compliant aneurysms are less prone to rupture as they can sustain such changes of volume. The aim of the current paper is to verify this paradigm by evaluating computationally the role played by the variation of peripheral resistance and the impact of aortic stiffness onto peak wall stress in ascending TAA. Methods. Fluid-Structure Interaction (FSI) analyses were performed using patient-specific geometries and boundary conditions derived from 4D MRI datasets acquired on a patient. Blood was assumed incompressible and was treated as a non-Newtonian fluid using the Carreau model while the wall mechanical properties were obtained from the bulge inflation tests carried out in vitro after surgical repair. The Navier Stokes equations were solved in ANSYS Fluent. The Arbitrary Lagrangian Eulerian formulation was used to account for the wall deformations. At the interface between the solid domain and the fluid domain, the fluid pressure was transferred to the wall and the displacement of the wall was transferred to the fluid. The two systems were connected by the System Coupling component which controls the solver execution of fluid and solid simulations in ANSYS. Fluid and solid domains were solved sequentially starting from the fluid simulations. Results. Distributions of blood flow, wall shear stress and wall stress were evaluated in the ascending thoracic aorta using the FSI analyses. We always observed a significant flow eccentricity in the simulations, in very good agreement with velocity profiles measured using 4D MRI. The results also showed significant increase of peak wall stress due to the increase of peripheral resistance and aortic stiffness. In the worst case scenario, the largest peripheral resistance (10 10 kg.s.m-4) and stiffness (10 MPa) resulted in a maximal principal stress equal to 702 kPa, whereas it was only 77 kPa in normal conditions. Conclusions. This is the first time that the risk of rupture of an aTAA is quantified in case of the combined effects of hypertension and aortic stiffness increase. Our findings suggest that a stiffer TAA may have the most altered distribution of wall stress and an acute change of peripheral vascular resistance could significantly increase the risk of rupture for a stiffer aneurysm.

The Influence of Material Properties and Wall Thickness on Predicted Wall Stress in Ascending Aortic Aneurysms: A Finite Element Study

On the Relative Effects of Wall and Intraluminal Thrombus Constitutive Material Properties in Abdominal Aortic Aneurysm Wall Stress

Evaluation of Peak Wall Stress in an Ascending Thoracic Aortic Aneurysm Using FSI Simulations: Effects of Aortic Stiffness and Peripheral Resistance

Biomechanical stress analysis of Type-A aortic dissection at pre-dissection, post-dissection, and post-repair states

A probabilistic and anisotropic failure metric for ascending thoracic aortic aneurysm risk assessment

Influence of wall thickness on the rupture risk of a patient-specific cerebral aneurysm: A fluid–structure interaction study

Uncertainty quantification of the wall thickness and stiffness in an idealized dissected aorta

Computational predictions of damage propagation preceding dissection of ascending thoracic aortic aneurysms

Computational analysis to assess hemodynamic forces in descending thoracic aortic aneurysms

In Vivo Quantification of Ascending Thoracic Aortic Aneurysm Wall Stretch Using MRI: Relationship to Repair Threshold Diameter and Ex Vivo Wall Failure Behavior

Relationship between histomorphology and biomechanical properties of the ascending aortic wall in the aneurysm zone

Fluid-Structure Interaction in Abdominal Aortic Aneurysm: Effect of Modeling Techniques

Temporal evolution of ascending aortic aneurysm wall stress predicts all-cause mortality

Computation of a probabilistic and anisotropic failure metric on the aortic wall using a machine learning-based surrogate model

Ultrasound Probe Pressure Affects Aortic Wall Stiffness: A Patient-Specific Computational Study in Abdominal Aortic Aneurysms

Effect of Intraluminal Thrombus Burden on the Risk of Abdominal Aortic Aneurysm Rupture

Comparative Study of Aortic Wall Stress According to Geometric Parameters in Abdominal Aortic Aneurysms

Impact of Geometric Attributes on Abdominal Aortic Aneurysm Rupture Risk: An In Vivo FSI-Based Study

Effect of aortic bifurcation geometry on pressure and peak wall stress in abdominal aorta: Fluid-structure interaction study

The effect of aneurismal-wall mechanical properties on patient-specific hemodynamic simulations: two clinical case reports

A novel framework for quantifying the subject-specific three-dimensional residual stress field in the aortic wall