Abstract:Purpose. It has been reported clinically that rupture or dissections in thoracic aortic aneurysms (TAA) often occur due to hypertension which may be modelled with sudden increase of peripheral resistance, inducing acute changes of blood volumes in the aorta. There is clinical evidence that more compliant aneurysms are less prone to rupture as they can sustain such changes of volume. The aim of the current paper is to verify this paradigm by evaluating computationally the role played by the variation of peripheral resistance and the impact of aortic stiffness onto peak wall stress in ascending TAA. Methods. Fluid-Structure Interaction (FSI) analyses were performed using patient-specific geometries and boundary conditions derived from 4D MRI datasets acquired on a patient. Blood was assumed incompressible and was treated as a non-Newtonian fluid using the Carreau model while the wall mechanical properties were obtained from the bulge inflation tests carried out in vitro after surgical repair. The Navier Stokes equations were solved in ANSYS Fluent. The Arbitrary Lagrangian Eulerian formulation was used to account for the wall deformations. At the interface between the solid domain and the fluid domain, the fluid pressure was transferred to the wall and the displacement of the wall was transferred to the fluid. The two systems were connected by the System Coupling component which controls the solver execution of fluid and solid simulations in ANSYS. Fluid and solid domains were solved sequentially starting from the fluid simulations. Results. Distributions of blood flow, wall shear stress and wall stress were evaluated in the ascending thoracic aorta using the FSI analyses. We always observed a significant flow eccentricity in the simulations, in very good agreement with velocity profiles measured using 4D MRI. The results also showed significant increase of peak wall stress due to the increase of peripheral resistance and aortic stiffness. In the worst case scenario, the largest peripheral resistance (10 10 kg.s.m-4) and stiffness (10 MPa) resulted in a maximal principal stress equal to 702 kPa, whereas it was only 77 kPa in normal conditions. Conclusions. This is the first time that the risk of rupture of an aTAA is quantified in case of the combined effects of hypertension and aortic stiffness increase. Our findings suggest that a stiffer TAA may have the most altered distribution of wall stress and an acute change of peripheral vascular resistance could significantly increase the risk of rupture for a stiffer aneurysm.

Computational predictions of damage propagation preceding dissection of ascending thoracic aortic aneurysms

Finite-element simulation of in-plane tear propagation in the dissected aorta: Implications for the propagation mechanism

Patient-specific Finite Element Modeling of Aneurysmal dilatation after chronic type B aortic dissection

Patient-specific predictions of aneurysm growth and remodeling in the ascending thoracic aorta using the homogenized constrained mixture model

On the Importance of Including Cohesive Zone Models in Modelling Mixed-Mode Aneurysm Rupture

Biomechanical stress analysis of Type-A aortic dissection at pre-dissection, post-dissection, and post-repair states

Investigation of Type A Aortic Dissection Using Computational Modelling

Abstract 589: A Fluid Structure Interaction Workflow For Studying Aortic Dissections

Biomechanical Factors Influencing Type B Thoracic Aortic Dissection: Computational Fluid Dynamics Study

Blunt trauma and acute aortic syndrome: a three-layer finite-element model of the aortic wall

Computation of a probabilistic and anisotropic failure metric on the aortic wall using a machine learning-based surrogate model

Fluid-structure interaction simulation of tissue degradation and its effects on intra-aneurysm hemodynamics

Fracture mechanics modeling of aortic dissection

A Fluid–structure Interaction-Based Numerical Investigation on the Evolution of Stress, Strength and Rupture Potential of an Abdominal Aortic Aneurysm

Assessment of aortic dissection remodeling with patient-specific fluid-structure interaction models

Computational Study of Abdominal Aortic Aneurysms with Severely Angulated Neck Based on Transient Hemodynamics Using an Idealized Model

A Pilot Study Exploring the Mechanisms Involved in the Longitudinal Propagation of Acute Aortic Dissection Through Computational Fluid Dynamic Analysis

Computational analysis to assess hemodynamic forces in descending thoracic aortic aneurysms

A Patient-Specific Morphoelastic Growth Model of Aortic Dissection Evolution

Human thoracic and abdominal aortic aneurysmal tissues: Damage experiments, statistical analysis and constitutive modeling

Evaluation of Peak Wall Stress in an Ascending Thoracic Aortic Aneurysm Using FSI Simulations: Effects of Aortic Stiffness and Peripheral Resistance