Abstract:In this paper, in order to establish the energy separation mechanism of the vortex tube, the hydrodynamic behavior of the compressible fluid in the asymmetric cavity space is investigated, and a numerical model of the trajectory deflection behavior is deduced and established; in order to form the optimal design method of the structural parameters of the vortex tube, the force situation of the fluid microelements entering different regions of the vortex chamber of the vortex tube is analyzed, and the trajectory deflection equations are corrected by combining with the expansion behavior of the fluid and the characterizing equations of vortex strength, transportability, and vortex initiation characteristics are given. The characterization equations of vortex strength, transportability and vortex initiation characteristics are given, and the numerical simulation of their influence parameters is carried out; in order to realize the prediction of the vortex tube performance of a given structure, the multifactor Pearson thermodynamic map is used to correlate and analyze the experimental data of vortex tubes reported publicly in the past years, and the polynomial regression equations are designed and established for the prediction of the vortex tube's energy separation effect and the confidence level and the degree of coincidence of the prediction results are examined. The confidence level and degree of agreement of the prediction results were examined. It is found that: the trajectory deflection motion of the compressible fluid in the asymmetric cavity space is the result of the combined effect of structural air pressure bias and the expansion behavior of the incident fluid; in order to improve the vortex strength in the vortex tube, the vortex initiation chamber space should be as small as possible; the increase of the diameters of the hot-end pipe and the cold-end pipe is conducive to the enhancement of vortex strength, but at the same time, it weakens the vortex transport in the heat pipe; the vortex initiation chamber size has a negative correlation with the hot-end temperature rise, and the inlet fluid pressure has a The negative correlation between the size of the vortex chamber and the temperature rise at the hot end, the positive correlation between the increase of inlet fluid pressure and the resulting temperature rise, and the strong correlation between the inlet fluid pressure and the friction coefficient on the effect of energy separation; the predictive equations for the effect of energy separation obtained by the fitting are in good agreement with the real situation.

Numerical analysis for the thermal performance and flow separation in the vortex tube with different design of flow control valve

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Experimental Study Of The Energy Separation In A Vortex Tube

Computational study of energy separation in convergent-divergent vortex tube for different throat diameters, throat locations, inlet pressures, and working gas

Numerical analysis and an approach for optimization of the Ranque–Hilsch vortex tube for a compressible flow

Numerical Study of the Energy Separation in the Novel-Designed Vortex Tube

The thermal performance of a novel convergent valveless vortex tube

Numerical three-dimensional analysis of the mechanism of flow and heat transfer in a vortex tube

Experimental, computational and optimization studies of temperature separation and flow physics of vortex tube: A review

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Optimizing the Temperature of Hot outlet Air of Vortex Tube using Taguchi Method.

Numerical Study of Thermal Performance on Fin and Tube Heat Exchanger with Flat Rectangular and Sinusoidal Winglet Vortex Generators

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Natural convective heat transfer analysis of a vertical tapered inner annulus tube with dual inverted frusto-conical turbulator using CFD

Parameter Optimization and Experimental Study on Effect of Rounding Off Edge Radius on Heat and Mass Transfer Between Gas Layers and Thermal Performance of Vortex Tube

Research on the prediction model of energy separation effect of vortex tube based on trajectory deflection characteristics and its numerical solution method

Heat Transfer Augmentation and Flow Visualization With Delta Winglets in a Tube: A Numerical Approach

Numerical and Experimental Investigations of Micro Thermal Performance in a Tube with Delta Winglet Pairs

Thermal performance assessment in a fin-and-oval-tube heat exchanger with delta winglet vortex generators

Numerical Inspection of location, density ratio and turbulent kinetic energy of vortex generator in gas turbine blade film cooling application

Numerical analysis of turbulent forced convection and fluid flow past a triangular cylinder with control plate using standard $κ$-$ε$ model