Abstract:A circular steel economy based on recycling scrap is severely hampered by the increasing accumulation of Cu. Herein, it is shown that Cu concentrations can be drastically reduced from 1 to less than 0.1 wt% by exploiting a critical oxygen concentration via the addition of iron ore to the melt, thereby actively removing Cu rather than simply diluting its concentration. A circular steel economy based on recycling scrap is severely hampered by the increasing accumulation of Cu returning from more and more electrified products, which severely limits processing, application, and safety of steels. As of yet, no viable strategies for its removal have been developed, and the increasing Cu contamination can only be diluted with fresh primary iron. This is not only evoking CO2 emissions from conventional reduction processes, but also merely delays the problem until global demands allow for a circular steel economy. However, the ongoing transformation toward green steel making may offer pathways to overcome this complex metallurgical challenge. It is demonstrated that Cu can be effectively evaporated from Fe–Cu–O melts—representing Fe ore mixed with Cu‐contaminated steel scrap—during hydrogen plasma‐based smelting reduction. This evaporation is found to be strongly influenced by the Cu activity determined by the concentration of oxygen in the liquid, with a critical O concentration of about 22 wt%. Even without the presence of hydrogen, Cu concentrations can thereby be drastically reduced from 1 to less than 0.1 wt%. Potentials and challenges for leveraging these fundamental findings on a laboratory scale for future industrial production of green steel are outlined and discussed.

Cu Evaporation from Liquid Iron Alloy in Stream

Removal of Copper from Fe–Cu Alloy by Using Iodine

Recovery of Cu-Fe Alloy from Copper Smelting Slag

Sustainable Ironmaking Toward a Future Circular Steel Economy: Exploiting a Critical Oxygen Concentration for Metallurgical Cu Removal from Scrap‐Based Melts

Experimental Study on the Phase Equilibrium of Copper Matte and Silica-Saturated FeO X -Sio 2 -Based Slags in Pyrometallurgical WEEE Processing

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Removal of arsenic from dusts produced during the pyrometallurgical refining of copper by vacuum carbothermal reduction

Experimental Study on Separation of Iron and Arsenic from Copper Sulfate Solution

Diffusive steel scrap melting in carbon-saturated hot metal—phenomenological investigation at the solid–liquid interface

Separation of silicon and iron in copper slag by carbothermic reduction-alkaline leaching process

Molten Oxide Electrolysis Using Copper-Containing Carbon-Saturated Molten Iron Anode

Removal of Arsenic During Iron Extraction from Waste Copper Slag

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

Valorization of Aluminum Dross with Copper via High Temperature Melting to Produce Al-Cu Alloys

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag

Element Distribution and Migration Behavior in the Copper Slag Reduction and Separation Process

Evolution of the structure and viscosity of copper slag during metallization-reduction

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature

Efficient extraction and separation of zinc and iron from electric arc furnace dust by roasting with FeSO<sub>4</sub>?7H<sub>2</sub>O followed by water leaching

Extraction of Copper, Cobalt and Nickel by Leaching of Iron (III) Sulfate from Copper Slags

Comparative Analysis of Lead Removal from Liquid Copper by ICF and CCF Refining Technologies