Abstract:The conveniently recoverable piezocatalyst with self-floating and stable performance has drawn wide attention. Herein, MoS2 was anchored on 1-cm-square eucalyptus wood blocks via a facile hydrothermal/solvothermal process to fabricate two floating piezocatalysts, i.e., MoS2/unpretreated wood (MUW) and MoS2/pretreated wood (MPW). FeCl3 solution was used as a Lewis acid to pretreat the wood through partial hydrolyzing cellulose and hemicellulose for an purpose to creat rich micropores for MoS2 loading in the wood and to form MoFe heterojunction. The piezocatalytic properties and performance of the prepared wood were systematically studied. The scanning electron microscopy confirms MoS2 was anchored on wood surface. The macroscopic photos show that MoS2 penetrated through the MPW interior whereas it was only loaded on the wood surface layer. The X-ray photoelectron spectroscopy reveals the shift of Mo 3d and S 2p, verifying the heterojunction formation of MPW. The Fourier transform infrared spectra prove the partial hydrolysis of wood matrix. In comparison to MUW, MPW had excellent piezocatalytic property, wide pH adaptability, convenient recyclability and high stability. Sildenafil and Cr6+ ions could be completely removed in 20 and 15 min, respectively, by MPW. Contrastly, the removal efficiency of sildenafil and Cr6+ by MUW was 78.6 % and 68.3 % in 20 and 15 min, respectively. After five cycles of use, the removal ratio of sildenafil was 62.4 % by MUW and 90.5 % by MPW in 20 min. The mineralization efficiency of sildenafil reached 99.2 % in 30 min by MPW, and various types of N/S-containing intermediates were effectively degraded. The electron spin resonance characterization and active species scavenging experiments displayed that e- and •O2- were major active species responsible for Cr6+ piezoreduction by MUW and MPW, while •O2- and •OH were the dominant species accounting for sildenafil degradation by MUW and MPW, respectively. And •OH was not generated in the MUW piezocatalysis process. MPW had higher piezoelectric current and lower resistance at the electron transfer interface than MUW. Conclusively, this study paves a new pathway for preparing new floating piezocatalysts with easy recyclability and high stability from biomass for wastewater treatment.

MoS2 and Fe3O4 modified spongy wood with micro-reaction cellulose channels and natural water transfer to enhance tetracycline removal

MoS 2 and Fe 3 O 4 Modified Spongy Wood with Micro-Reaction Cellulose Channels and Natural Water Transfer to Enhance Tetracycline Removal

Designing 3d‐mos2sponge As Excellent Cocatalysts in Advanced Oxidation Processes for Pollutant Control

Ni-doped MoS2 embedded in natural wood containing porous cellulose for piezo-catalytic degradation of tetracycline

Preparation and application of wood-supported piezocatalyst with high efficiency and stability via partial hydrolysis of wood cellulose and hemicellulose with Lewis acid

Co/N co-doped carbonized wood sponge with 3D porous framework for efficient peroxymonosulfate activation: Performance and internal mechanism

Chitosan Induced Synthesis of Few-Layer MoS2/Fe-doped Biochar and Its Dual Applications in Cr(VI) Removal

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Magnetic porous carbon materials derived from metal-organic framework in-situ growth on natural cellulose of wood for sulfadiazine degradation: Role of delignification and mechanisms

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Antifouling Wood Matrix with Natural Water Transfer and Microreaction Channels for Water Treatment

Magnetic MoS2/Fe3O4 composite as an effective activator of persulfate for the degradation of tetracycline: performance, activation mechanisms and degradation pathways

Bimetal-organic framework-derived nanotube@cellulose aerogels for peroxymonosulfate (PMS) activation

A Simple Method for Preparing Sb2S3/short-cut Carbon Fiber Foam for the Electrocatalytic Degradation of Dyes

Peroxymonosulfate activation by graphene oxide-supported 3D-MoS2/FeCo2O4 sponge for highly efficient organic pollutants degradation

MoS2@MIL-101(Fe) functionalized carboxylated loofah as a platform for the photodegradation of tetracycline and methylene blue from wastewater

Chitosan derived N-doped carbon anchored Co3O4-doped MoS2 nanosheets as an efficient peroxymonosulfate activator for degradation of dyes

MOF-on-MOF-derived Fe Zr bimetal oxides supported on hierarchically porous carbonized wood to promote photo-Fenton degradation of ciprofloxacin

3D sponge-based cobalt-lanthanum difunctional composite (3D sponge@Co-La) promotes peroxymonosulfate activation for efficient removal of roxarsone and released arsenic: An easy-to-use and highly recyclable catalyst for wastewater remediation

Magnetic core–shell S-Fe@MOF derivative hybrids to activate peroxymonosulfate for highly efficient degradation of tetrabromobisphenol A

ZIF-8/balsa wood derived N-doped porous carbon as self-supporting electro-Fenton cathode for efficient antibiotics degradation