Abstract:Titanium and its alloys find extensive application within the realms of dentistry and orthopedics due to their remarkable chemical stability. Nevertheless, they are still susceptible to corrosion in harsh environments. Micro-arc oxidation (MAO) emerges as a potent methodology for enhancing the corrosion resistance of titanium and its alloys, achieved through the generation of a ceramic stratum atop the material's surface. The corrosion resistance of MAO coatings in clinical applications is closely related to their microstructure. This manuscript systematically explores the effect of annealing temperature on the phase composition and microstructure of MAO coatings. Furthermore, the evolution of the surface properties and the crystal structure of coatings is meticulously discussed and illustrated. The results show that the corrosion resistance of coatings exhibits an ascending trajectory followed by a subsequent decline, coinciding with the augmentation of the annealing temperature. This behavior can be attributed to the structural evolution of coatings caused by the gradual increase of the annealing temperature. At the optimum temperature (400 °C), the annealing treatment leads to the crystallization of the coating as well as to a decrease in the surface porosity, resulting in the formation of a compact and continuous multilayer microstructure. The decrease in porosity can be attributed to the diffusion-reaction of oxygen from the air with titanium from the discharge channel (titanium oxide), resulting in the formation of TiO 2 particles that effectively fill the pores. The decrease in corrosion resistance of the coatings after annealing at 800 °C is due to the phase transition of TiO 2 which leads to the expansion of cracks inherent in the oxide layer to form A-H cracks. Therefore, this study shows that the microstructure of MAO coatings can be adjusted by post annealing treatment (400 °C) to obtain a desirable oxide layer with appropriate porosity, crystallinity and chemical composition, thus improving its corrosion resistance.

Effect of annealing on AZ31 magnesium alloy on MAO coatings

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Study on Microstructure and Properties of Black Micro-Arc Oxidation Coating on AZ31 Magnesium Alloy by Orthogonal Experiment

Influence of Electrolyte Compositions and Electrical Parameters on Thermal Properties of Micro-Arc Oxidized AZ91 Alloy

INFLUENCE OF MICRO- ARC OXIDATION TREATMENT ON THE CORROSION BEHAVIOR OF AZ91D MAGNESIUM ALLOY

Influence of Electric Parameters on MAO of AZ91D Magnesium Alloy Using Alternative Square-Wave Power Source

Effect of ZrSiO4 Concentration on the Microstructure and Corrosion Resistance of MAO Coatings Formed on AZ91 Magnesium Alloy

Effect of pause time on microstructure and corrosion resistance in AZ31 magnesium Alloy's micro-arc oxidation coating

Evaluation of the micro-arc oxidation treatment effect on the protective performance of a Mg-rich epoxy coating on AZ91D magnesium alloy

Comparison of Corrosion Resistance of Microarc Oxidation Coatings Prepared with Different Electrolyte Concentrations on AM60 Magnesium Alloy

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Improved Corrosion Properties of Mg-Gd-Zn-Zr Alloy by Micro-Arc Oxidation

Mechanistic analysis of improving the corrosion performance of MAO coatings on Ti-6Al-4V alloys by annealing

The thermal dynamic simulation and microstructure characterization of micro-arc oxidation (MAO) films on magnesium AZ31 irradiated by high-intensity pulsed ion beam

Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation

The study of microarc oxidation coating on AZ91 modified by cerium and its corrosion resistance

Influences of Frequency Ratio of Pulse Power on MAO Coatings on AZ91D Magnesium Alloy

Effect of laser cleaning on the growth and properties of micro-arc oxidation layers of AZ31 magnesium alloy

Effect of Pre-Anodized Film on Micro-Arc Oxidation Process of 6063 Aluminum Alloy

Effect of (NH4)2ZrF6, Voltage and Treating Time on Corrosion Resistance of Micro-Arc Oxidation Coatings Applied on ZK61M Magnesium Alloys