Abstract:The aim of this review is to summarize the possibilities of replacing graphite bipolar plates in fuel-cells. The review is mostly focused on metallic bipolar plates, which benefit from many properties required for fuel cells, viz. good mechanical properties, thermal and electrical conductivity, availability, and others. The main disadvantage of metals is that their corrosion resistance in the fuel-cell environment originates from the formation of a passive layer, which significantly increases interfacial contact resistance. Suitable coating systems prepared by a proper deposition method are eventually able to compensate for this disadvantage and make the replacement of graphite bipolar plates possible. This review compares coatings, materials, and deposition methods based on electrochemical measurements and contact resistance properties with respect to achieving appropriate parameters established by the DOE as objectives for 2020. An extraordinary number of studies have been performed, but only a minority of them provided promising results. One of these is the nanocrystalline β-Nb2N coating on AISI 430, prepared by the disproportionation reaction of Nb(IV) in molten salt, which satisfied the DOE 2020 objectives in terms of corrosion resistance and interfacial contact resistance. From other studies, TiN, CrN, NbC, TiC, or amorphous carbon-based coatings seem to be promising. This paper is novel in extracting important aspects for future studies and methods for testing the properties of metallic materials and factors affecting monitoring characteristics and parameters.

Effect of Crown Ether Additives on the Enhanced Performance of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Metallic Material Selection and Prospective Surface Treatments for Proton Exchange Membrane Fuel Cell Bipolar Plates—A Review

Significant Enhancement of Corrosion Resistance of Stainless Steel with Nanostructured Carbon Coatings by Substrate-Catalytic CVD

Performance Optimizing Strategies For PEMFC And Electrode Materials

Effects of the crown ether cavity on the performance of anion exchange membranes

Research Progress in Surface Modification of Metal Bipolar Plates for Proton Exchange Membrane Fuel Cells

Optimization of Fuel Cell Performance Using Computational Fluid Dynamics

Corrosion-resistant and interfacial conductive AlTiVCrMo high-entropy alloy and (AlTiVCrMo)Nx high-entropy ceramics coatings for surface modification of bipolar plates in proton exchange membrane fuel cells

Corrosion Resistant, Lightweight, and Inexpensive Metallic Bipolar Plates With Excellent Manufacturability for PEM Fuel Cell Power Systems

Comparative review of corrosion-resistant coatings on metal bipolar plates of proton exchange membrane fuel cells

Studies of Electrocatalyst and Metallic Bipolar Plate for Polymer Electrolyte Fuel Cell

Recent advances on materials and technologies of composite bipolar plate for proton exchange membrane fuel cell

Effect of bipolar-plates design on corrosion, mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers: A review

Effect of Metallic Bipolar Plates Fillet Radii on Fuel Cell Performance

The synergetic effect of air pollutants and metal ions on performance of a 5 kW proton‐exchange membrane fuel cell stack

Optimizing Catalyst Layer Structure with Carbon Nanofiber Additive for Better Performance of Proton Exchange Membrane Fuel Cell

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Improving anion exchange membrane fuel cell performance via enhanced ionomer–carbon interaction in cathode catalyst layers with carbon-supported Pt catalyst using a pyrene carboxyl acid coating

Enhanced Corrosion Resistance and Interfacial Conductivity of TiC x/a-C Nanolayered Coatings via Synergy of Substrate Bias Voltage for Bipolar Plates Applications in PEMFCs

Current status of research on composite bipolar plates for proton exchange membrane fuel cells (PEMFCs): nanofillers and structure optimization