Abstract:Here, the solution casting approach was used to create the composite film of expanded polystyrene (EPS) and reduced graphene oxide (rGO) with globules of various sizes. After adding SEBS‐g‐MA, the shape altered to globular free films exhibiting homogenous dispersion of rGO in EPS matrix. An optical investigation showed that composite materials had a significantly higher refractive index and absorption than EPS. The optical, thermal, and mechanical investigations suggest that the produced composites may be a great substitute for virgin EPS, allowing for a wider range of applications. This study displays the effect of reduced graphene oxide (rGO) nanofiller and polystyrene‐b‐poly(ethylene‐ran‐butylene)‐b‐polystyrene‐grafted maleic anhydride (SEBS‐g‐MA) on the optical, thermal, and mechanical features of expanded polystyrene (EPS). First, the thin films of pristine EPS and composites were prepared using solution cast method. The prepared films were subjected to fourier‐transform infrared (FTIR), SEM, UV–visible spectrophotometer, thermogravimetric analysis/differential scanning calorimetry, and universal testing machine for structural, morphological, optical, thermal, and mechanical characterizations. Optical study revealed a significant increase in refractive index and absorption of composites than EPS. Indirect band‐gap energy of EPS (~4.08 eV) was reduced to ~1.61 eV for rGO composite and ~ 2.23 eV for composite composed of rGO and SEBS‐g‐MA. Thermal analyses presented improvement in characterization temperatures such as T10, T50, Tp, Tm, and Tg of composites, which ultimately lead to the thermal stability of prepared composites than pristine EPS. Stress–strain curves displayed higher yield strength (46.62 MPa), Young's modulus (96.29 MPa), and strain at break (0.54%) for EPS+rGO composite than pure EPS having stress at break (1.01 MPa), Young's modulus (12.44 MPa), and strain at break (0.08%). Moreover, ductility with relatively higher strain at break (0.61%) and lower Young's modulus (79.32 MPa) and yield strength (32.98 MPa) was noticed in EPS+rGO+SEBS‐g‐MA composite than EPS+rGO composite film. Morphological analysis revealed a change in globular morphology of EPS and inhomogeneous dispersion of rGO in EPS to homogeneously dispersed rGO in EPS matrix without globules owing to the addition of SEBS‐g‐MA. The increase in compatibility of EPS and rGO due to SEBS‐g‐MA was also observed in FTIR spectra. Research Highlights Here, the solution casting approach was used to create the composite film of EPS and rGO with globules of various sizes. After adding SEBS‐g‐MA, the shape altered to globular free films exhibiting homogenous dispersion of rGO in EPS matrix. An optical investigation showed that composite materials had a significantly higher refractive index and absorption than EPS. The optical, thermal, and mechanical investigations suggest that the produced composites may be a great substitute for virgin EPS, allowing for a wider range of applications.

Synergistic Reinforcement with SEBS-g-MAH for Enhanced Thermal Stability and Processability in GO/rGO-Filled PC/ABS Composites

Investigation on the mechanical, thermal, structural and morphological properties of polypropylene/ethylene-vinyl acetate copolymer/graphene oxide nanocomposites: effect of nanofiller surface functionalization and compatibilizers

Temperature-dependent compatibilizing effect of graphene oxide as a compatibilizer for immiscible polymer blends

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties

Synergistic Effects of Hybrid Carbonaceous Fillers of Carbon Fibers and Reduced Graphene Oxides on Enhanced Heat-Dissipation Capability of Polymer Composites

Compatibilization of Immiscible PA6/PLA Nanocomposites Using Graphene Oxide and PTW Compatibilizer for High Thermal and Mechanical Applications

Synthesis of a novel reactive compatibilizer with large surface area and the application in monomer casting nylon/polyethylene–octene elastomer blends

Upgrading the properties of polylactic acid/luffa fiber biocomposites through the addition of maleic anhydride grafted styrene–ethylene–butylene–styrene impact modifier

Improved mechanical performance and swelling resistance of ethylene propylene diene monomer/styrene butadiene rubber nanocomposites through the incorporation of graphene oxide as a reinforcing filler

Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers

Synergistic effects of dual reactive compatibilizers for high-performance fully biodegradable polylactic acid/poly (butyleneadipate-co-terephthalate) composites

Morphology Development and Superior Mechanical Properties of Pp/Pa6/Sebs Ternary Blends Compatibilized by Using A Highly Efficient Multi-Phase Compatibilizer

Preparation of Functionalized Graphene by Simultaneous Reduction and Surface Modification and Its Polymethyl Methacrylate Composites Through Latex Technology and Melt Blending

Morphological, compatibility, rheological and mechanical properties of graphene oxide/PLA/XNBR-g-GMA/XNBR: empirical and theoretical approaches

Correlation of Morphology Evolution with Superior Mechanical Properties in PA6/PS/PP/SEBS Blends Compatibilized by Multi-phase Compatibilizers

Improving the Electroactive Phase, Thermal and Dielectric Properties of PVDF/graphene Oxide Composites by Using Methyl Methacrylate-Co-glycidyl Methacrylate Copolymers As Compatibilizer

Creating Super-Tough and Strong PA6/ABS Blends Using Multi-Phase Compatibilizers

Improving 3D printability and interlayer adhesion in ABS/PP immiscible polymer blends

Multi-approach synthesis of functionalized graphene oxide as reinforcement for polyethylene: Make a strong interaction

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

Evaluation of a novel composite of expanded polystyrene with rGO and SEBS‐g‐MA