Abstract:Turbine blades are the most critical components in any power plant. Failure in even one rogue blade out of hundreds of blades fixed on the rotor leads to colossal damage to the machine. Statistics have shown that low-pressure turbine blades in steam power plants are generally more susceptible to failure compared to high- or intermediate-pressure blades. The mechanism of failures is different in each case and is generally very complex. As a result, a large number of blade failures are not fully understood. Two primary forces acting on the blades are the steady centrifugal force due to rotation and the fluctuating steam bending force. In view of no direct access to monitor the health of the blades through vibration or other means, indirect method using non-contacting probes have been attempted and some are in use in special cases. Largely these methods are expensive and intrusive in nature. They involve placing of sensors in the narrow space inside the turbine casing, routing special signal cables with sealing arrangement and involves difficulties in analyzing shot duration signals from each rotating blades. Unless a diagnostic technique is made simple to implement and whose reliability is proven, power plants will not find it attractive to invest on upgrade for safe operation of the machine. This article is about an innovative method of detecting the presence of blade vibration in operating turbine through vibration signal analysis and prevention through process control. The method is based on vibration analysis of the turbine casing. The casing vibration includes signals associated with the blades of different stages called as blade passing frequency (BPF). When the rotating blades vibrate, the analysis of changes in the BPF is a novel way of diagnosing blade vibrations. Signals captured from operating plants have been analyzed and blade vibrations have been detected and verified with Campbell diagram. Laboratory experiments were carried out on a rotating fan to demonstrate robustness of the diagnostics tool for turbine blades.

In Situ Detection of Turbine Blade Vibration and Prevention

An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades

Research on Vibration Characteristics of Last Stage Blade Based on Blade Tip-Timing Technology

Non-Contact Measurement of Blade Vibration in an Axial Compressor

A Novel Blade Vibration Monitoring Experimental System Based on Blade Tip Sensing.

Gas turbine blade fracturing fault diagnosis based on broadband casing vibration

Analysis of Blade Tip Timing Data from Fan Blades with Synchronous and Non-Synchronous Vibration

Measurement Methodology: Blade Tip Timing: A Non-Contact Blade Vibration Measurement Method

FAULT DETECTION INSPECTION ANALYSIS OF A GAS TURBINE USING FREQUENCY DOMAIN

Tip Timing Based Non-contact Vibration Measurement of Aero-engine Turbine Blades

Correlation Analysis of Multiple Sensors for Industrial Gas Turbine Compressor Blade Health Monitoring

A blade tip-timing method without once-per-revolution sensor for blade vibration measurement in gas turbine engines

Foreign Object Damage Diagnosis Of Aero-Engine Compressor Based On Damping Averaging Built-In Matrix Method

A Hybrid Fault Diagnosis Approach for Blade Crack Detection using Blade Tip Timing

Non-Contact High-Frequency Vibration Measurement Using Blade Tip Vibration Acceleration

Simulation and experimental study of the blade vibration monitoring (BVM) method based on blade tip timing

OPR-free Single Probe Blade Tip Timing for Monitoring Rotating Blade

A Keyphasor-Free Traveling Waves Analysis Method Based on Blade Tip Timing and Experimental Validation

Adaptive Iterative Approach for Efficient Signal Processing of Blade Tip Timing

Active vibration-based structural health monitoring system for wind turbine blade: Demonstration on an operating Vestas V27 wind turbine

Validation of vibro-acoustic modulation of wind turbine blades for structural health monitoring using operational vibration as a pumping signal