Abstract:A novel model of the vibration plowing effect (VPE) is proposed for the first time to reveal hitherto not well-understood ultrasonic cutting mechanics and provide a theoretical basis for controlling the tool wear and machining quality of longitudinal ultrasonic vibration-assisted drilling (LUAD). The new model includes a condition model to judge the occurrence of the VPE on the whole flank of the drill and a volume model to calculate the vibration plowing force caused by the VPE of LUAD. For one thing, a condition model is proposed to distinguish the plowing effect of conventional machining and the VPE of LUAD by comprehensively analyzing the relationship between the clearance angle of the main cutting edge and the drill's path. For another, an analytical model of the vibration plowing volume (VPV) of LUAD is derived by integrating the plowing volume of the main cutting-edge element to improve the tool wear and machining quality. Finally, a series of comparative experiments between conventional drilling (CD) and LUAD is carried out. The validity of the proposed VPE's condition model and the VPV's analytical model is verified by the chip's micromorphology and the specific plowing force of the workpiece, respectively. The experimental results show that the fine and regular textures caused by the VPE can be observed on the chip surface and side micromorphology of LUAD. However, the coarse and irregular textures are displayed in CD, which shows that the proposed conditional model is adequate. Moreover, it is calculated by the deduced VPV's analytical model that when the ultrasonic amplitude is 3.8 and 8.3 μm, the average value of the specific plowing force of Al 6061- T 6 determined in this paper is 1.399 × 10 5 N/mm 3 and 1.274 × 10 5 N/mm 3 , respectively. These results agree with the value reported in other literature, that is 1.31 × 10 5 N/mm 3 , which proves the validity of the proposed model of the VPV. The validated analysis model is then used to conduct predictive analysis on the VPE and vibration plowing force of LUAD under a series of process parameters. The above research results clarify the mechanism of vibration plowing under ultrasonic action and provide a theoretical basis for controlling the tool wear and machining quality of LUAD.

Effects of process parameters on periodic impact force exerting on cutting tool in ultrasonic vibration-assisted oblique turning

Effect of Ultrasonic Vibration Parameters on Machining Performance Based on Tool-Workpiece Contact Ratio

Analysis and modeling of cutting force considering the tool runout effect in longitudinal-torsional ultrasonic vibration-assisted 5 axis ball end milling

Cutting Force Model of Longitudinal-Torsional Ultrasonic-Assisted Milling Ti-6Al-4V Based on Tool Flank Wear

Theoretical and experimental investigations of tool wear in ultrasonic vibration–assisted turning of 304 austenitic stainless steel

Force prediction in ultrasonic vibration-assisted milling

Modeling and investigation of cutting force for SiCp/Al composites during ultrasonic vibration-assisted turning

Investigation on cutting forces and tool wear in high-speed milling of Ti-6Al-4V assisted by longitudinal torsional ultrasonic vibrations

Analytical and experimental investigation on cutting force in longitudinal-torsional coupled rotary ultrasonic machining zirconia ceramics

Simulation and Experiment of Cutting Force in Ultrasonic Torsional Vibration Assisted Micro-Milling

Coupling Effect of Machine Tool Dynamic Characteristics and Cutting Conditions on the Cutting Process Vibration and High-Speed Micro-Planing Surface Mid-Frequency Waviness

Longitudinal–torsional Ultrasonic Vibration-Assisted Side Milling Process

Effects of ultrasonic vibration cutting trajectories on chip formation of tungsten alloys

Estimation of Tool Temperature During Laser-Ultrasonic Elliptical Vibration Turning High Volume Fraction SiCp/Al Composites

Study on tool wear in longitudinal-torsional composite ultrasonic vibration–assisted drilling of Ti-6Al-4V alloy

Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V

Improvement effects of vibration on cutting force in rotary ultrasonic machining of BK7 glass

Tool wear rate prediction in ultrasonic vibration-assisted milling

Experimental study on the ultrasonic assisted face turning residual stress

A novel model of vibration plowing effect for longitudinal ultrasonic vibration-assisted drilling

Study of milling force variation in ultrasonic vibration-assisted end milling