Abstract:Although the rapid development of electrical energy storage devices has slowed down environmental pollution, their large-scale application has posed huge challenges to battery-related mineral resources; thus, extending the lifespan of high-voltage lithium cobalt oxide (LCO) is of great importance. Surface oxide coating is considered as the most common low-cost modification method for addressing unstable cycling performance. However, studies have shown that the oxide layer would further react with an electrolyte, while the investigation on the corresponding component evolution is lacking. Herein, a typical example utilizing the above reaction to realize surface reconstruction is presented. Applying atomic layer deposition (ALD), originally, an ultrathin Al2O3 layer is coated on the LCO surface; however, this coating layer has undergone reconstruction after reacting with electrolyte decomposition products during the cycling. Compared with simple coating, the in situ formed Li3AlF6 layer has a tighter binding to the LCO surface while possessing good Li+ conductivity and electrochemical stability. In addition, the unique properties of the ALD technology allow us to achieve ultrathin (1 nm) and conformal coating, which is beneficial for electronic conductivity and cycling stability. Furthermore, the surface phase transition layer stripping failure mechanism has first been revealed to explain the loss of Co and O, while the reconstructed Li3AlF6 effectively suppresses the surface stripping. Thus, excellent high-voltage performance has been realized (an 89% capacity retention after 1000 cycles at 4.5 V and an 88% capacity retention after 200 cycles at 4.6 V). This work casts a new understanding on the surface reconstruction of the oxide coating layer, which is also significant for other electrode materials' modification.

Surface Engineering via Rare Earth Oxide Composite Coating to Enhance the High-Voltage Stability of the LiCoO 2 Cathode

Water-Mediated Surface Engineering Enhances High-Voltage Stability of Fast-Charge LiCoO 2 Cathodes

A Universal Multifunctional Rare Earth Oxide Coating to Stabilize High-Voltage Lithium Layered Oxide Cathodes

Lattice‐Matched Interfacial Modulation Based on Olivine Enamel‐Like Front‐Face Fabrication for High‐Voltage LiCoO2

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Engineering Strategies for High‐voltage LiCoO2 Based High‐energy Li‐ion Batteries

Enhanced 4.7 V Electrochemical Performance of the LiCoO2 Cathode Via a Fluoride and LiCo1–xAlxO2 Composite Coating

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor

Simultaneously Constructing a TiO2–LiF Composite Coating Enhancing the Cycling Stability of LiCoO2 at 4.6 V High Voltage

Ultralong Lifespan for High-Voltage LiCoO<sub>2</sub> Enabled by In Situ Reconstruction of an Atomic Layer Deposition Coating Layer

Ultralong Lifespan for High-Voltage LiCoO2 Enabled by In Situ Reconstruction of an Atomic Layer Deposition Coating Layer

Water-Mediated Surface Engineering Enhances High-Voltage Stability of Fast-Charge LiCoO2 Cathodes

An in Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances

Stalling Oxygen Evolution in High-Voltage Cathodes by Lanthurization

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Structural Understanding for High‐Voltage Stabilization of Lithium Cobalt Oxide

Al2O3 Surface Coating on LiCoO2 Through a Facile and Scalable Wet-Chemical Method Towards High-Energy Cathode Materials Withstanding High Cutoff Voltages

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V