Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

Water-Mediated Surface Engineering Enhances High-Voltage Stability of Fast-Charge LiCoO 2 Cathodes

Water-Mediated Surface Engineering Enhances High-Voltage Stability of Fast-Charge LiCoO2 Cathodes

Surface Engineering via Rare Earth Oxide Composite Coating to Enhance the High-Voltage Stability of the LiCoO 2 Cathode

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface Passivation of LiCoO2 by Solid Electrolyte Nanoshell for High Interfacial Stability and Conductivity

Suppressing Surface Ligand-to-Metal Charge Transfer Toward Stable High-Voltage LiCoO2.

Stalling Oxygen Evolution in High-Voltage Cathodes by Lanthurization

Lattice‐Matched Interfacial Modulation Based on Olivine Enamel‐Like Front‐Face Fabrication for High‐Voltage LiCoO2

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Engineering the Surface of LiCoO 2 Electrodes Using Atomic Layer Deposition for Stable High-Voltage Lithium Ion Batteries

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Engineering Strategies for High‐voltage LiCoO2 Based High‐energy Li‐ion Batteries

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Promoting Surface Electric Conductivity for High-Rate LiCoO<sub>2</sub>

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability