Abstract:The rapid development of wearable electronics, humanoid robots, and artificial intelligence requires sensors to sensitively and stably detect external stress variations in large areas or on three-dimensional (3D) irregularly shaped surfaces while possessing the comfort. Most importantly, the flexibility and 3D compliance of sensors, and the fitting state of the interface between the sensor and the object are of great significance to the sensing accuracy and reliability. The ordered or random stacking and entangling of flexible and electrically conductive fiber materials can form a highly porous and mechanically stable fiber assembly. The changes in external stress can lead to the air trapped in the fiber assembly to flow in and out rapidly and repeatedly, as well as the reversible mechanical deformation of fiber materials. Correspondingly, the contact areas between electrically conductive fibers in the fiber assembly are reversibly changed, which makes the conductive and flexible fiber assembly be an ideal candidate for piezoresistive sensing material. It can be further expected that the statistical stability of contact points between conductive fibers under the stress may significantly increase with the decrease in fiber diameters. Herein, a new method to make a flexible piezoresistive sensor with conductive and porous fiber assembly was proposed. An ultrasensitive piezoresistive material was facilely prepared by fabricating conductive poly(vinyl alcohol-<i>co</i>-ethylene) (EVOH) nanofiber assemblies. The sensing performance of the piezoresistive sensor was optimized by regulating the nanofiber morphology, electrical conductivity, and mechanical properties. The flexible piezoresistive sensor exhibited a sensitivity of 2.79 kPa<sup>–1</sup>, a response time of 3 ms, and a recovery time of 10 ms. The sensing performance at different working frequencies was stable and durable within 4500 cycling tests. The flexible sensor showed good pressure-sensing accuracy and reliability when used on irregular surfaces and therefore was further applied in the static monitoring of large-area spatial pressure distribution and the wearable intelligent interactive device, demonstrating great application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10516?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10516</a>.SEM images, water transmission ability, stability, the resistance change of the CNA while stretching and bending, optimized sensing performance of CNA, and the calculation model analysis of the CNA (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_001.pdf">PDF</a>)Recording of the specific example of the corresponding zoom-in and zoom-out functions when the fingers perform the opening and merging operations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Surface Engineering of a 3D Topological Network for Ultrasensitive Piezoresistive Pressure Sensors

3D Network PPy Nanofibers for Highly Sensitive Flexible Piezoresistive Pressure Sensors

A New Approach for Ultrahigh-Performance Piezoresistive Sensor Based on Wrinkled PPy Film with Electrospun PVA Nanowires As Spacer

All-Nanofiber Network Structure for Ultrasensitive Piezoresistive Pressure Sensors.

Hierarchically Microstructure-Bioinspired Flexible Piezoresistive Bioelectronics

Highly Sensitive Wearable Pressure Sensors Based on Three-Scale Nested Wrinkling Microstructures of Polypyrrole Films

Highly Sensitive Flexible Piezoresistive Sensor with 3D Conductive Network

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

Porous fiber paper and 3D patterned electrodes composed high-sensitivity flexible piezoresistive sensor for physiological signal monitoring

Highly Sensitive Wearable Pressure Sensor Over a Wide Sensing Range Enabled by the Skin Surface‐Like 3D Patterned Interwoven Structure

Highly Sensitive P(VDF-TrFE)/BTO Nanofiber-Based Pressure Sensor with Dense Stress Concentration Microstructures

Highly sensitive pressure sensor with broad linearity via constructing a hollow structure in polyaniline/polydimethylsiloxane composite

Flexible piezoresistive sensor constructing from ILs/MWCNTs/PVDF ternary composite for high sensitivity and wide detection range

A Flexible Piezoresistive Pressure Sensor with Micro-Papillae Structure for High Sensitivity and Wide Detection Range

A Durable Flexible Pressure Sensor with High Sensitivity and Wide Pressure Range for Health Monitoring

Engineered Microstructure Derived Hierarchical Deformation of Flexible Pressure Sensor Induces a Supersensitive Piezoresistive Property in Broad Pressure Range

Flexible Piezoresistive Sensors Based on PPy Granule-Anchored Multilayer Fibrous Membranes with a Wide Operating Range and High Sensitivity

High-performance Flexible Piezoresistive Pressure Sensor Based on Multi-layer Interlocking Microstructures

Bioinspired Hierarchical Polydimethylsiloxane / Polyaniline Array for Ultrasensitive Pressure Monitoring

Breathable and Large Curved Area Perceptible Flexible Piezoresistive Sensors Fabricated with Conductive Nanofiber Assemblies

High-performance piezoresistive flexible pressure sensor based on wrinkled microstructures prepared from discarded vinyl records and ultra-thin, transparent polyaniline films for human health monitoring