Abstract:Multi-level dual-active-bridge (DAB) DC-DC converters offer higher voltage-blocking capability and larger stepup ratios, as well as increased number of degrees of freedom (DoFs) compared to the traditional two-level DAB converter. Thus, it has potential to be used in medium-voltage DC (MVDC) systems. However, the control complexity of the multi-level DAB converters also increases along with the number of DoFs. When soft-switching is considered as an optimization objective together with other performance indices (e.g., peak or root-mean-square values of the inductor current), the analytical solutions will be difficult to derive due to the increased number of control variables and complicated soft-switching constraints. To address this issue and improve the efficiency of the DAB converter, this paper proposes a control strategy for a multi-level DAB converter to achieve both soft-switching and minimum current stress simultaneously. The analytical solutions are calculated by improved Karush-Kuhn-Tucker (KKT) conditions, where the numerical solutions are used to locate the operating modes and determine the zero-voltage-switching (ZVS) boundaries. This can simplify the Lagrangian function and inequality constraints, and then, the analytical solutions can be obtained by the simplified KKT conditions. In addition, a comprehensive comparison between the quasi-ZVS and strict-ZVS control is carried out, so that the converter efficiency, implementation complexity, and smooth transition between different power levels can be compromised for practical applications. Finally, the performances of the proposed control strategy in terms of current stress minimization and softswitching operation are validated by experimental tests.

Optimized EPS Control to Achieve Full Load Range ZVS With Seamless Transition for Dual Active Bridge Converters

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Partition Variable Frequency and EPS Hybrid Control to Achieve Full Load Range ZVS for Dual Active Bridge Converters

An LLC -DAB Bidirectional DCX Converter with Wide Load Range ZVS and Reduced Switch Count

Minimum Current Control for Under-Resonant Dual-Bridge-Series-Resonant Converter

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Bidirectional ZVS Operation of All Switches for a DAB Converter Over a Full Range of Loads With Optimized Current Stress

ZVS Control Strategy of Dual Active Bridge DC/DC Converter with Triple-Phase-shift Modulation Considering RMS Current Optimization

Extension of Zero-Voltage Switching Region of Wide Volage Ratio Range Dual-Active-Bridge Converter by LC Antiresonant Network

Achieving Rated Power and ZVS for Dual Active Bridge Converter Considering the Interaction of Nonidealities

A Collaborative Modulation Method of Dual-Side Backflow Power Optimization and Zero-Voltage Switching for Dual Active Bridge

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

Deadband Effect and Accurate ZVS Boundaries of GaN-Based Dual-Active-Bridge Converters With Multiple-Phase-Shift Control

Study on Limited Double-polarity Control Method of ZVZCS Converter with Full Load Range Operation

A Phase Shift Control of Minimal Circulating Current and ZVS Turn-On for DAB Converter

Hybrid Control Strategy for an Integrated DAB–LLC–DCX DC–DC Converter to Achieve Full-Power-Range Zero-Voltage Switching

Optimal Control Scheme for Single-Stage Dual-Active-Bridge AC-DC Converter

A Current-Stress-Optimized Design Method for Dual Active Bridge Converters With Improved ZVS Capability Under Wide Output Voltage Conditions