Abstract:Zero-voltage switching (ZVS) for dual active bridge (DAB) with wide voltage conversion ratio has a contradiction with low conduction loss, especially under light power transmission. Root mean square (RMS) increase of inductor current is unavoidable just by optimizing modulation schemes. Inspired by the various frequency (VF) and various inductor (VI), this article proposes a DAB converter with the capability of regulating the impedance of the resonant tank to extend the ZVS region. With an LC antiresonant circuit in series with original inductor, the equivalent inductance of the resonant network of the proposed converter increases along with the switching frequency within the designed frequency range. Thereby, when the voltage mismatches and the transferred power decreases, a large impedance is obtained by slightly increasing frequency to help to achieve ZVS. Moreover, the proposed DAB is found that single phase shift (SPS) has nearly identical characteristics of ZVS and conduction loss compared with multiple phase shift modulation. The benefit of this is that the complexity of close-loop control is significantly reduced just considering the switching frequency and external shift phase. In addition, ZVS characteristics and optimal control method are analyzed in detail. Finally, a 2 kW 360-400V/40-60V prototype is built, and the main experimental results are provided to verify the feasibility of the proposed converter and soft switching range of all switches.

Achieving Rated Power and ZVS for Dual Active Bridge Converter Considering the Interaction of Nonidealities

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Transformer Secondary Leakage Inductance Based ZVS Dual Bridge DC/DC Converter

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

Analysis and Design of a Control Strategy for Wide-Range ZVS of Isolated Bidirectional Dual-Bridge Series Resonant DC/DC Converters

Design and Implementation of an Accurately Regulated Multiple Output ZVS DC–DC Converter

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

ZVS Control Strategy of Dual Active Bridge DC/DC Converter with Triple-Phase-shift Modulation Considering RMS Current Optimization

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

Design of a 10 Kw, High-Frequency Dual Active Bridge Converter Using SiC Devices

Circulating Current and ZVS-on of a Dual Active Bridge DC-DC Converter: A Review

Magnetic Components Design Method for Efficiency Optimization of Dual Active Bridge Converter under SPS Control

Extension of Zero-Voltage Switching Region of Wide Volage Ratio Range Dual-Active-Bridge Converter by LC Antiresonant Network

Modified Unified PWM Control to Operate the Dual Active Bridge Converters under ZVS in the Whole Load Range

An Enhanced Dual Active Bridge Converter With Full Domain ZVS by Utilizing a Simple Segment Control for Wide Voltage Range Applications

Steady-State and Transient DC Magnetic Flux Bias Suppression Methods for a Dual Active Bridge Converter

Modeling and Analysis of 2/3-Level Dual-Active-Bridge DC-DC Converters with the Five-Level Control Scheme

Analysis And Optimal Design Considerations For An Improved Full Bridge Zvs Dc-Dc Converter With High Efficiency

A Current-Stress-Optimized Design Method for Dual Active Bridge Converters With Improved ZVS Capability Under Wide Output Voltage Conditions

Optimized EPS Control to Achieve Full Load Range ZVS With Seamless Transition for Dual Active Bridge Converters

A Collaborative Modulation Method of Dual-Side Backflow Power Optimization and Zero-Voltage Switching for Dual Active Bridge