Abstract:Mesostructured silica SBA-15 materials with different structural parameters, such as pore size, pore volume, and wall thickness, etc., were prepared by varying the postsynthesis hydrothermal treatment temperature and adding inorganic salts. The hydrothermal stabilities of these materials in steam (100% water vapor) were systematically investigated using a variety of techniques including powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and (29)Si solid-state NMR. The effect of the pore size, microporosity or mesoporosity, and wall thickness on the stability was discussed. The results show that all of the SBA-15 materials have a good hydrothermal stability under steam of 600 degrees C for at least 24 h. N(2) sorption measurements show that the Brumauer-Emmett-Teller surface area of SBA-15 materials is decreased by about 62% after treatment under steam at 600 degrees C for 24 h. The materials with thicker walls and more micropores show relatively better hydrothermal stability in steam of 600 degrees C. Interestingly, we found that the microporosity of the mesostructured silica SBA-15 is a very important factor for the hydrothermal stability. To the materials with more micropores, the recombination of Si-O-Si bonds during the high-temperature steam treatment may not cause direct destruction to the wall structure. As a result, SBA-15 materials with more micropores show better stability in pure steam of 600 degrees C. Nevertheless, these materials are easily destroyed in steam of 800 degrees C for 6 h. Two methods to effectively improve the hydrothermal stability are introduced here: one is a high-temperature treatment, and another is a carbon-propping thermal treatment. Thermal treatment at 900 degrees C can enhance the polymerization degree of Si-O-Si bonds and effectively improve the hydrothermal stability of these SBA-15 materials in 800 degrees C steam for 12 h. But, this approach will cause very serious shrinkage of the mesopores, resulting in smaller pore diameter and low surface area. A carbon-propping thermal treating method was employed to enhance the polymerization of Si-O-Si bonds and minimize the serious shrinkage of mesopores at the same time. It was demonstrated to be an effective method that can greatly improve the hydrothermal stability of SBA-15 materials in 800 degrees C steam for 12 h. Furthermore, the SBA-15 materials obtained by using the carbon-propping method possess larger pores and higher surface area after the steam treatment at 800 degrees C compared to the materials from the direct thermal treatment method after the steam treatment.

Post-synthesis treatment of acid-made mesoporous silica materials by ammonia hydrothermal process

Improving the Hydrothermal Stability of Mesoporous Silica SBA-15 by Pre-treatment with (Nh4)2sif6

Effects of acid treatment on the physico-chemical and pore characteristics of halloysite

Control of morphology in synthesizing mesoporous silica

On the improvement of pore accessibility through post-synthesis hydrothermal treatments of spray dried SBA-15 microspheres

Direct synthesis of hydrothermally stable micro–mesoporous silicas templated by unsaturated α-linolenic acid self-assemblies under high temperature hydrothermal conditions

The Search of Promoters for Silica Condensation and Rational Synthesis of Hydrothermally Stable and Well Ordered Mesoporous Silica Materials with High Degree of Silica Condensation at Conventional Temperature

Hydrothermal Transformation and Characterization of Porous Silica Templated by Surfactants

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

New Understanding and Simple Approach to Synthesize Highly Hydrothermally Stable and Ordered Mesoporous Materials

Post-synthesis Pore Expansion of Mesoporous Silica SBA-15 in the Organic Template Removal Via Solvothermal Treatment

Synthesis of Highly Ordered and Hydrothermally Stable Mesoporous Materials Using Sodium Silicate As a Precursor

Using ultrasound to improve the sequential post-synthesis modification method for making mesoporous Y zeolites

Hydrothermal synthesis of mesoporous silica spheres: effect of the cooling process

Incorporation of Al3+ Ions to Promote the Stabilization Effect of (nh4)(2)sif6 Treatment on the Hydrothermal Stability of Mesoporous Sba-15 Zeolite

High temperature synthesis of hydrothermally stable micro-mesoporous silica and Al-doped mesoporous silica via rigid template

Design and Synthesis of Ordered Mesoporous Silica Materials with High Degree of Silica Condensation at High Temperature from a Mixture of Polymer Surfactant with Small Organic Ammonium.

Synthesis and characterization of amorphous silica-alumina with enhanced acidity and its application in hydro-isomerization/cracking

Understanding Effect of Wall Structure on the Hydrothermal Stability of Mesostructured Silica SBA-15.

Using As–synthesized Mesoporous Silica As New Capturer and Releaser

One-step synthesis of hydrothermally stable mesoporous aluminosilicates with strong acidity