Abstract:Various defects with dispersive feature sizes can be accumulated inevitably in fiber-reinforced resin composites during their manufacturing and service processes, which are also difficult to be detected. The final objective of defects testing is to obtain the accuracy assessment of performance of defective structures. A micro-stress non-destructive defect detection and evaluation method is proposed for fiber-reinforced resin composites, which is especially suitable for composites measurement. Combing with the optical measurement technology for full-field displacement, the abnormal responses which caused by the defects of the structure under low stress level is able to be captured. The wrinkle defect detection is taken as an example to show the measurement processes. First, a specific detection scheme is designed based on the theoretical prediction of characteristic responses of wrinkles. Then, a new method of full-field displacement measurement is innovatively proposed based on the grating projection technology. Results show that under the axial tensile loading, the distorted out-of-plane displacements caused by wrinkles can be detected by the improved grating projection technology. The distorted displacements revealed the spatial distribution and severity of defects, and the influence on structural performance degradation can be evaluated based on the degree of displacement distortion. Further, by applying the optical-mechanical detection method, the mechanical responses of the defective component under a given working condition can be obtained directly, which can provide a reference for the adaptability evaluation of the component.

High Spatial Resolution Internal Stress Testing and Analysis of Fiber Optic Winding Structure Using BOTDA

An identification of collapse defect in fiber optic winding structure based on distributed stress testing

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Study on the Fixation Technique of Optical Fiber Based on BOTDR

Study on Real-Time Reinforcement Stress Measurement Based on Brillouin Optical Time Domain Analysis

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Performances of Distributed Fiber Optic Strain Sensor with Thin-Walled Ring

Distributed cracks detection by BOTDA and its application in corrosion cracking monitoring

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

The Use of BOTDR to Evaluate the Thermal Effects on Fiber Residual Strain of Optical Fiber Cables

Winding Mechanical Modeling and Simulation of Fiber Optic Cable Spool for Underwater Communication

Application of a Distributed Optical Fiber Sensing Technique in Monitoring the Stress of Precast Piles

Quantifying Progressive Failure of Micro-Anchored Fiber Optic Cable–Sand Interface via High-Resolution Distributed Strain Sensing

In-Field Quasi-Distributed Internal Stress Sensing Based on Optical Frequency Domain Reflectometry

Pulse-Pre Pump Brillouin Optical Time Domain Analysis-Based Method Monitoring Structural Multi-Direction Strain

Distributed fiber optic strain sensing for crack detection with Brillouin shift spectrum back analysis

EXPERIMENTAL STUDY ON MONITORING OF STRESS FOR PRESTRESSED ANCHORAGE CABLE USING DISTRIBUTED FIBER OPTIC SENSOR

Experimental Analysis on Real-time Distributed Strain Measurement in Concrete

Distributed Fiber Deformation Measurement by High-Accuracy Phase Detection in OFDR Scheme

Full-length Stress Monitoring of Stranded Wire Using Optical Fiber Brillouin Sensor

Wrinkles in Fiber-Reinforced Resin Composites: Micro-stress Non-Destructive Testing