Abstract:Rigid polyurethane foam (RPUF) is one of the most widely used construction materials, but it is flammable and releases toxic smoke during combustion. In this study, a novel, synergistic-effect flame retardant (FPASO-DOPO) was synthesized by the Atherton–Todd reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with fumaropimaric acid-based siloxane (FPASO). The obtained FPASO-DOPO was then introduced into the cross-linking network of an RPUF by chemical bonding. The flame retardancy was enhanced by the synergistic effect of phosphorus and silicon in the FPASO-DOPO, which captured the free radical in the gaseous phase and formed a compact silica-rich char layer in the condensed phase. More importantly, the incorporation of FPASO-DOPO not only increased the limiting oxygen index from 17.0% to 26.1% but also reduced the total smoke release by 17.5%. A cone-calorimeter test indicated that the peak heat-release rate of the modified foam was reduced by 33.7% compared with that of neat RPUF. Calculations determined that the flame retardancy index (FRI) value was 7.88 for a modified foam, which shows a "good" flame retardancy. Moreover, the modified foams exhibited improvements in both compressive and flexural strength owing to the introduction of the rosin. This study has important implications for the development of modified polymers with good flame and smoke suppression from renewable resources.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02273?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02273</a>.Additional FPASO-DOPO characterization; FT-IR and <sup>1</sup>H NMR spectra of FPASO-DOPO; EDS mapping of FPASO-DOPO; elemental analysis of FPASO-DOPO and foams; curing behaviors of foams at a heating rate of 10 °C/min; thermal stability of FPASO-DOPO; formulation of sample DOPO-RPUF 20%; and comparison of compressive strengths between P-RPUF, FR-RPUF 20%, and DOPO-RPUF 20% (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02273/suppl_file/sc1c02273_si_001.pdf">PDF</a>)Video of the flammability test (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02273/suppl_file/sc1c02273_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Smoke optical density and transmittance of a polyurethane foam surface treated with aluminum and mineral felt

Flexible Polyurethane Foams: A Comparative Measurement of Toxic Vapors and Other Toxic Emissions in Controlled Combustion Environments of Foams With and Without Fire Retardants

Analysis of Flammability and Smoke Emission of Plastic Materials Used in Construction and Transport

Flammability, Toxicity, and Microbiological Properties of Polyurethane Flexible Foams

A novel and effective method to fabricate flame retardant and smoke suppressed flexible polyurethane foam

Analysis of the Light Extinction Effect of Polymethyl Methacrylate by Smoke Particle Size in Combustion Conditions

Biobased Phosphorus Siloxane-Containing Polyurethane Foam with Flame-Retardant and Smoke-Suppressant Performances

Fabrication of Fire Safe Rigid Polyurethane Foam with Reduced Release of CO and NOx and Excellent Physical Properties by Combining Phosphine Oxide-Containing Hyperbranched Polyol and Expandable Graphite

The Influence of Carbon-Encapsulated Transition Metal Oxide Microparticles on Reducing Toxic Gases Release and Smoke Suppression of Rigid Polyurethane Foam Composites

Effect of Layer-by-layer Self-Assembled Sepiolite-Based Nanocoating on Flame Retardant and Smoke Suppressant Properties of Flexible Polyurethane Foam

Block it and rock it: Smoke suppressants that form a protective layer in PA 6.6

Flame retardant and smoke-suppressant rigid polyurethane foam based on sodium alginate and aluminum diethylphosphite

Comparative evaluation of flame retardant performance in rigid polyurethane foams: TCPP, TDCP MP, and ATH as promising additives

Investigation on the fire hazard of hybrid polymer materials based on the test of smoke toxicity

Development and Characterization of "Green Open-Cell Polyurethane Foams" with Reduced Flammability

Optimisation of Additives to Maximise Performance of Expandable Graphite-Based Intumescent-Flame-Retardant Polyurethane Composites

Techno-economic-environmental characteristics of polyurethane composite to thermal insulation for building with flame resistance: corroborative effect recycled of PVC and aluminum oxide

Polyurethane foams reinforced with microspheres - assessment of the application in construction as a thermal insulation material

Terminating heat and mass transfer: Graphite‐tailings gelatum coating for polyurethane foam with super flame retardancy and smoke suppression

Research on two sides horizontal flame spread over rigid polyurethane with different flame retardants

Effect of inorganic additive flame retardant on fire hazard of polyurethane exterior insulation material