Epitaxial Core–Shell MnFe Prussian Blue Cathode for Highly Stable Aqueous Zinc Batteries

Gongzheng Yang,Zhaoheng Liang,Qian Li,Yan Li,Fei Tian,Chengxin Wang

DOI: https://doi.org/10.1021/acsenergylett.3c01603

IF: 22

2023-09-08

ACS Energy Letters

Abstract:The high-safety aqueous zinc battery is regarded as a desirable alternative to lithium-ion batteries; however, it still lacks sufficient cycling capability. The primary impediment is structural distortion of cathode materials in aqueous electrolytes. Here we propose an epitaxial Fe- on Mn-hexacyanoferrate to construct a core–shell double-atom-redox Prussian blue analogue (PBA). The shell Fe-PBA shows a small volumetric change, inclined toward surface amorphization upon ion-insertion, leading to the low-strain core–double shell structure. The in situ surface reorganization effectively suppresses Jahn–Teller distortion and prevents Mn dissolution into electrolyte in the core Mn-PBA. Consequently, the cathode design that facilitates high-voltage full cells (over 1.8 V vs Zn2+/Zn) enables a high discharge capacity of 166 and 117 mAh g–1 and a capacity retention of 72.4% and 83.9% over 400 and 4800 cycles at 0.1 and 2 A g–1, respectively. A pouch cell operates successfully under harsh conditions from −30 to 60 °C.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry

What problem does this paper attempt to address?

The paper attempts to address the issue of insufficient cycling stability in aqueous zinc batteries. Specifically, while aqueous zinc batteries have advantages such as high safety, low cost, and environmental friendliness, their cathode materials are prone to structural deformation in aqueous electrolytes, leading to a decline in battery performance. These issues are mainly manifested as:

1. **Structural Deformation**: The cathode materials undergo volume changes during charge and discharge processes, leading to structural distortion and affecting the cycling stability of the battery.
2. **Manganese Dissolution**: Particularly for manganese-based Prussian blue analogues (PBAs), manganese ions easily dissolve from the material into the electrolyte, further exacerbating structural deformation and capacity decay.

To address these problems, the paper proposes a new design strategy: growing a layer of iron-based Prussian blue analogue (FeHCF) on the surface of manganese-based Prussian blue analogue (MnHCF) to form a core-shell structure of double-atom-redox Prussian blue analogue (core−shell double-atom-redox PBA). This design aims to improve the cycling stability and capacity retention of the battery through the following mechanisms:

1. **Low-Strain Core-Shell Structure**: The Fe-PBA shell exhibits smaller volume changes during ion insertion and tends to amorphize on the surface, thereby reducing internal stress and maintaining structural integrity.
2. **Inhibition of Jahn−Teller Distortion**: The Fe-PBA shell can effectively inhibit the Jahn−Teller distortion in the Mn-PBA core, preventing manganese ions from dissolving into the electrolyte.
3. **High-Voltage Full Battery**: This design allows the battery to operate at high voltages (over 1.8V vs Zn²⁺/Zn) and exhibit high discharge capacity and excellent cycling stability at different current densities.

Through these improvements, the paper demonstrates the great potential of this novel core-shell structured cathode material in practical applications, especially in terms of stable performance over a wide temperature range.