Abstract:Enormous assistance is required during rehabilitation activities, which might result in a variety of complications if performed manually. To solve this issue, several solutions in the form of assistive devices have been presented recently. Another issue highlighted is the lack of kinematic compatibility in low degrees-of-freedom (dof) systems. The proposed approach of developing a human-motion-oriented rehabilitation device deals with the problem through hybrid architectures. A novel modular synthesis approach is used for the purpose to induce generality in the design process. Using a modular strategy, three planar hybrid configurations are generated for two-dof mechanisms for supporting flexion/extension motion. Three such architectures are optimally synthesised and kinematically analysed over the entire workspace. A Genetic Algorithm (GA) is used to synthesise the architecture parameters optimally. Moreover, the outcomes are evaluated against a set of seven poses and posture locations of the wrist to choose the most suitable configuration among the others. Subsequently, kinematic compatibility is analysed for the coupled system – formed by the selected architecture and the human arm – while wearing the proposed mechanism. According to the findings of optimal synthesis, workspace and singularity analysis, configuration-III is capable of achieving the optimal postures for all task space locations (TSLs). Further, the work modifies the design by attaching additional three revolute passive joints for correcting misalignment concerns using coupled mobility analysis. The modular strategy for hybrid architectures and the subsequent mobility analysis provides an algorithmic framework for synthesising a task-based rehabilitation device. Manual physiotherapy is reported as repeated task, expensive and time-consuming, and considered stressful for the therapist or assistants to provide one-on-one physiotherapy to each patient in the traditional method. Robotic rehabilitation is, therefore, a viable option. In the several reported works on robotic rehabilitation exoskeletons, misalignment of the exoskeleton and the human motion is considered an open challenge. Normally, it is being managed through large number of degrees of freedom, which is certainly expensive and complex in control. The proposed approach of developing a human-motion-oriented rehabilitation device deals with the problem through hybrid architectures and modular strategy to develop them. While focusing upon the emulation of natural human motion trajectory, the compatibility of orthotic joint and human joint motion needs attention. As biological joint possesses complex kinematic characteristics, closed-loops are used in the design. Overall, a complete framework of a cost effective low-dof rehabilitation device is proposed and detailed through coupled analysis.

Development of a passive Rehabilitation Robot for the wrist joint through the implementation of an Arduino UNO microcontroller

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Development of the Biomech-Wrist: A 3-DOF Exoskeleton for Rehabilitation and Training of Human Wrist

Design and Analysis of the M3Rob: A Robotic Platform for Wrist and Hand Rehabilitation

Design, Development, and Testing of an Intelligent Wearable Robotic Exoskeleton Prototype for Upper Limb Rehabilitation

Hand orthosis design for the rehabilitation of people with rheumatoid arthritis

Design and Experimental Evaluation of a Low Cost, Portable, 3-DOF Wrist Rehabilitation Robot with High Physical Human–Robot Interaction

Design, Development, and Control of a Hand/Wrist Exoskeleton for Rehabilitation and Training

Development of a Wearable Upper Limb Rehabilitation Robot Based on Reinforced Soft Pneumatic Actuators

Design and Development of a Hand Exoskeleton Robot for Active and Passive Rehabilitation

Soft Robotic Bilateral Rehabilitation System for Hand and Wrist Joints

On the design of an exoskeleton for neurorehabilitation: design rules and preliminary prototype

Design and Implementation of a Rehabilitation Upper-limb Exoskeleton Robot Controlled by Cognitive and Physical Interfaces

Tracking and Stiffness Control Based on Sliding Modes Design for a Wrist-Elbow Rehabilitator

Design of a self-aligning 3-DOF actuated exoskeleton for diagnosis and training of wrist and forearm after stroke

New Design of a Soft Robotics Wearable Elbow Exoskeleton Based on Shape Memory Alloy Wire Actuators

Design and testing of a soft parallel robot based on pneumatic artificial muscles for wrist rehabilitation

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control

Design, simulation, and experimental evaluation of a light weight, and wearable cable driven ForeWrist exoskeleton robot for assistance and rehabilitation

Design and control of system for elbow rehabilitation: Preliminary findings

Architectural design and development of an upper-limb rehabilitation device: a modular synthesis approach