Abstract:Polymers used in almost any situation face the threat of sudden fire, and application scenarios with high requirements on friction performances of polymers are no exception. Herein, P- and N-codoped molybdenum disulfide (PNMoS2) nanosheets were fabricated via the original process of ball milling, followed by annealing, which subsequently served as the template to grow the two-dimensional (2D) cobalt borate (Co–Bi) ultrathin nanosheets for the generation of PNMoS2@Co–Bi dual sheets. With the introduction of 2 wt % PNMoS2@Co–Bi dual nanosheets into epoxy resin (EP), defined as EP/PNMoS2@Co-Bi, an obvious reduced peak heat release rate of 28.0% and a total heat release of 27.9%, respectively, were obtained. It is noted that the total smoke release, which is vital for evacuation and life safety, has been reduced by 41.8%. In addition, EP/–Bi achieved a significantly improved LOI, UL-94, and thermal performance, along with the high char yield (22.9 wt %) and remarkably decreased mass loss rate. Interestingly, the loading of 2 wt % PNMoS2 has the lowest friction coefficient value (decrease by 18.7%) and volume wear rate (46.1% reduction than pure EP), which is attributed to the PNMoS2 nanosheets that can generate the uniform lubricating transfer layer. The outstanding properties of EP nanocomposites are attributed to the coupled effects between PNMoS2 and Co–Bi ultrathin sheets with an enhanced interface interaction in the EP matrix. This study manifests the extensive application of well-designed PNMoS2@Co–Bi nanohybrids in the fire safety and wear resistance of polymers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01999.Materials; preparation precursor of PNMoS2 nanosheets; synthesis of Co–Bi nanosheets grown on PNMoS2 (PNMoS2@Co–Bi); preparation of EP/PNMoS2@Co–Bi composites; characterization; SEM images of the fractured sections of EP composites; The TEM observation of the ultrathin sections obtained from EP/PNMoS2@Co–Bi composites; TGA data for EP and its composites in nitrogen; cone calorimeter data of EP and its composites; LOI and UL-94 data of EP and its nanocomposites; and absorbance of pyrolysis products for EP and its composites (PDF)This article has not yet been cited by other publications.

Hierarchical MoS 2 /polyaniline binary hybrids with high performance for improving fire safety of epoxy resin

Heterolayered Boron Nitride/Polyaniline/Molybdenum Disulfide Nanosheets for Flame-Retardant Epoxy Resins

In Situ Fabrication of Molybdenum Disulfide Based Nanohybrids for Reducing Fire Hazards of Epoxy

Metal-organic Framework@polyaniline Nanoarchitecture for Improved Fire Safety and Mechanical Performance of Epoxy Resin

A Novel Phosphorus-Containing MoS2 Hybrid: Towards Improving the Fire Safety of Epoxy Resin.

MoS2 nanolayers grown on carbon nanotubes: an advanced reinforcement for epoxy composites

SiO<sub>2</sub>/MOFs-based synergistic flame retardants provide enhanced fire safety for epoxy resins

Design of Hierarchically Tailored Hybrids Based on Nickle Nanocrystal-Decorated Manganese Dioxides for Enhanced Fire Safety of Epoxy Resin

1/2D SnO2 Nanowires on MnO2 Nanosheets Hybrid Architecture for Reducing Fire Hazards of Epoxy Nanocomposites

Anomalous Nano-Barrier Effects of Ultrathin Molybdenum Disulfide Nanosheets for Improving the Flame Retardance of Polymer Nanocomposites

Simultaneous exfoliation and functionalization of MoS2 nanosheets by molecular-designed poly(ionic liquid): Integrated interfacial crosslinking effect for mechanical and flame retardance enhancement of polyacrylonitrile composite fiber

Phosphorus/Nitrogen-Codoped Molybdenum Disulfide/Cobalt Borate Nanostructures for Flame-Retardant and Tribological Applications

Hierarchical Polyphosphazene@Molybdenum Disulfide Hybrid Structure for Enhancing the Flame Retardancy and Mechanical Property of Epoxy Resins

Biomimetic construction of hierarchical MXene@PDA@CoFeOx nanohybrids towards efficient fire-safe epoxy nanocomposites with enhanced thermal conductivity and mechanical properties

Construction of Nanomaterials Based on Molybdenum Disulfide Decorated onto a Metal–Organic Framework (UiO-66) to Improve the Fire Retardancy of Epoxy

Polyaniline‐coupled graphene/nickel hydroxide nanohybrids as flame retardant and smoke suppressant for epoxy composites

MoFs decorated TA-MoS2 nanosheets improving the mechanical and fire properties of epoxy resins: Interface engineering design based on virginia creeper

Construction of Multifunctional Linear Polyphosphazene and Molybdenum Diselenide Hybrids for Efficient Fire Retardant and Toughening Epoxy Resins

Flame-Retardant Epoxy Resin Nanocomposites Reinforced with Polyaniline-Stabilized Silica Nanoparticles

In Situ Synthesis of A Mos2/Coooh Hybrid by A Facile Wet Chemical Method and the Catalytic Oxidation of Co in Epoxy Resin During Decomposition

Anderson-type Polyoxometalate-Based Hybrid with High Flame Retardant Efficiency for the Preparation of Multifunctional Epoxy Resin Nanocomposites