Abstract:Background: The aim of the present study is to simulate and better understand the long-term interplay between alumina matrix composite (AMC) femoral head and aqueous environment. In particular, we focused on clarifying the role of alumina grains on zirconia phase stability and mechanical equilibrium in AMC head during aging processes in a clinically-relevant time frame. Methods: The tested AMC head consists of an alumina matrix (82 vol.%) reinforced by yttria-stabilized zirconia (17 vol.%), chromium oxide (0.5 vol.%), and strontium aluminate (0.5 vol.%). The accelerated hydrothermal aging testing (at 134 °C, 2-bars pressure) was conducted up to 20 h. According to ASTM standard, 1-h aging under these conditions corresponds approximately to 2 yrs in vivo exposure. Confocal Raman and fluorescence spectroscopy were applied to quantify surface tetragonal-to-monoclinic phase transformation of zirconia and surface stresses in the AMC head. The Mehl-Avrami-Johnson (MAJ) theory was applied, which allowed modeling the micromechanisms of nucleation and growth of monoclinic sites during the transformation process. The obtained results were compared to those of monolithic zirconia (3Y-TZP) femoral heads. Results: The 3Y-TZP head showed a rapid increase of transformation rate beyond the aging time of 5 h (simulated as ∼10 yrs in vivo), suggesting the initiation of the transformation cascade toward the neighboring zirconia grains (growth mechanism). On the other hand, MAJ analysis revealed that the growth mechanism was completely absent and the nucleation of the monoclinic phase was partially prevented in the AMC head even after the 20-h aging (∼40 yrs in vivo). In addition, the stress accumulation in the AMC head was restricted at a quite low level throughout the aging simulation. Conclusion: Those results suggest that the presence of stable and hard alumina in the AMC can play a considerable role in slowing down the destabilization processes by spatially encompassing zirconia grains.

Percolative Mechanism of Aging in Zirconia-Containing Ceramics for Medical Applications

Low-temperature ageing of zirconia-toughened alumina ceramics and its implication in biomedical implants

[Study on Low Temperature Degradation of Dental Zirconia Ceramic].

Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis

Zirconia ageing is related to total hip arthroplasty aseptic loosening. A study of 45 retrieved zirconia heads

Ageing, Shocks and Wear Mechanisms in ZTA and the Long-Term Performance of Hip Joint Materials

A critical comparison of methods for the determination of the ageing sensitivity in biomedical grade yttria stabilized zirconia

Microstructural investigation of the aging behavior of $(3Y-TZP)-Al_2O_3$ composites

Effects of Aging on the Mechanical Properties of Dental Pigmented 3Y-Tzp Ceramics

Modeling the aging kinetics of zirconia ceramics

Accelerated Aging in 3 mol%-Yttria-Stabilized Tetragonal Zirconia Ceramics Sintered in Reducing Conditions

Hydrothermal Ageing and Its Effect on Fracture Load of Zirconia Dental Implants

Mechanical, low temperature degradation, and biocompatibility of Al-doped dental 3Y-TZP ceramic

Effect of accelerated aging on dental zirconia-based materials

Does artificial aging correctly predict the long-term in-vivo degradation behavior in zirconia hip prostheses?

Zirconia in biomedical applications

The effects of artificial aging on high translucent zirconia

In Vitro Cyclic Fatigue and Hydrothermal Aging Lifetime Assessment of Yttria-Stabilized Zirconia Dental Ceramics

Characterization of a hydrothermally aged experimental alumina-toughened zirconia composite

A Novel Zirconia-Based Composite Presents an Aging Resistant Material for Narrow-Diameter Ceramic Implants

The aging micromechanisms of alumina matrix composite (AMC) used in total hip arthroplasty