Abstract:For the optical system of the telescope, with the increase in telescope size, the manufacture of monolithic primary becomes increasingly difficult. Instead, the use of segmented mirrors, where many individual mirrors (the segments) work together to provide an image quality and an aperture equivalent to that of a large monolithic mirror, is considered a more appropriate strategy. But with the introduction of the large telescope mirror comprised of many individual segments, the problem of insuring a smooth continuous mirror surface (co-phased mirrors) becomes critical. One of the main problems is the measurement of the vertical displacement between the individual segments (piston error), for such mirrors, the segment vertical misalignment (piston error) between the segments must be reduced to a small fraction of the wavelength (<100nm) of the incoming light. The measurements become especially complicated when the piston error is in order of wavelength fractions. To meet the performance capabilities, a novel method for phasing the segmented mirrors optics system is described. The phasing method is based on a high-aperture Michelson interferometer. The use of an interferometric technique allows the measuring of segment misalignment during the daytime with high accuracy, which is a major design guideline. The innovation introduced in the optical design of the interferometer is the simultaneous use of monochromatic light and multiwavelength combination white-light source in a direct method for improving the central fringe identification in the white-light interferometric phasing system. With theoretic analysis, we find that this multiwavelength combination technique can greatly increase the visibility difference between the central fringe and its adjacent side fringes, and thus it offers an increased signal resolution. So make the central fringe identification become easier, and enhance the measure precision of the segment phasing error. Consequently, it is suitable for high-precision measurement purpose and application in the segment piston error phasing system. The description about the expected interferograms and the feasibility of the phasing method are presented here.

Dynamic coherence scanning interferometry based on an optical phase mask for simultaneous measurement of local induced vibration and local topology change of a mirror

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Scanning Interferometric Method for Measuring Group Delay of Dispersive Mirrors

Actively stabilized optical fiber interferometry technique for online/in-process surface measurement.

Universal Interferometer Based on Dynamically-Adjusted Fringe Periods

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

Application of A White-Light Interferometric Measuring System As Co-Phasing the Segmented Primary Mirrors of the High-Aperture Telescope

Recent Developments of Interferometric Wavefront Sensing

Research on Reflective Polarization Phase-Shifting Dynamic Point Diffraction Interferometry

Extended Range Phase-Sensitive Swept Source Interferometer for Real-Time Dimensional Metrology

An Optic-Fiber Interferometer for the Dynamic Characterization of Microstructures.

Design of A White-Light Interferometric Measuring System for Co-Phasing the Primary Mirror Segments of the Next Generation of Ground-Based Telescope

High-speed Scanning Fiber-Optic Heterodyne Interferometer Using a Micro-Electro-mechanical System Mirror and an F-Theta Lens

Study on the co-phasing simulation and experimental of segmented mirror based on broadband light

Analysis of low-coherence-spectrum interferometric system applied to phase error detection of segmented mirror

Co-phase quantization and adjustment of segmented mirrors based on dual-wavelength vortex interference

Investigation of characteristic for the combination of MEMS mirror and F-theta lens applied in all fiber coupled infrared heterodyne interferometry

Application of A High-Precision Interferometric Measuring System As Phasing the Segmented Primary Mirrors of the Next Generation of Ground-Based Telescope

Light Beam Coupling Efficiency of Thickness Measurement System Based on Low-Coherent Fiber-Optic Interferometry

Simultaneous wavenumber measurement and coherence detection using temporal phase unwrapping

Fiber-optic Based Scanning Confocal Microscopic Interferometer for the Measurement of Surface Topography in Manufacturing Process