Abstract:The Li-CO2 batteries are concerned as a potential energy conversion and storage system which can not only effectively capture CO2 gas but also offer a high energy density. Therefore, they can be widely used in CO2-enriched environments such as submarine operations. However, the development of Li-CO2 batteries is still restricted by the high polarization and poor cycle performance mainly due to the insulating discharge product, e.g., Li2CO3. Herein, the Mn2Co2C nanoparticles dispersed in interconnected nitrogen-doped carbon frameworks (Mn2Co2C@NC), obtained by pyrolyzing MnCo Prussian blue analogous (MnCo-PBA), are first utilized as the cathode materials in Li-CO2 batteries. The batteries deliver a high discharge capacity (18962 mAh g−1 at 100 mA g−1), the lowest overpotential (1.47 V), and the best cycle performance (330 cycles, close to 1800 h, with a limited capacity of 500 mAh g−1 at 200 mA g−1). The good cycling stability under 200 mA g−1 is more prominent for current Li-CO2 batteries. The superior performance of Mn2Co2C@NC is ascribed to abundant catalytic sites of Mn/Co-nitrogen-carbon (Mn/Co-NC) and nitrogen-doped carbon, which have outstanding adsorption and activation effects on CO2. Meantime, the robust interconnected carbon framework provides fast electron/electrolyte transport paths and a large deposition space of Li2CO3. The density functional theory calculations reveal the strong adsorption of Li+ and CO2, strong catalytic performance for CO2 reduction, and excellent electrical conductivity of the Mn/Co-NC and nitrogen-doped carbon active sites. Finally, when combining a gel electrolyte, to the best of our knowledge, for the first time the fabricated quasi-solid-state Li-CO2 batteries demonstrate good cycling stability with high deliverable specific discharge capacity, highlighting its great potential for the applications of flexible and wearable batteries.

Elevating Discharge Voltage of Li2CO3‐routine Li‐CO2 Battery over 2.9 V at an Ultra‐wide Temperature Window

Elevating Discharge Voltage of Li₂CO₃‐routine Li‐CO₂ Battery over 2.9 V at an Ultra‐wide Temperature Window

Binuclear Cu complex catalysis enabling Li–CO2 battery with a high discharge voltage above 3.0 V

Li‐CO2 Batteries Efficiently Working at Ultra‐Low Temperatures

Aqueous Formate‐Based Li‐CO 2 Battery with Low Charge Overpotential and High Working Voltage

Designing Advanced In Situ Electrode/Electrolyte Interphases for Wide Temperature Operation of 4.5 V Li||LiCoO<sub>2</sub> Batteries

Additive Evolved Stabilized Dual Electrode-Electrolyte Interphases Propelling the High-Voltage Li||LiCoO2 Batteries Up to 4.7 V

Stable 2e−/2CO2 Electrochemistry Triggered by Enriched Interfacial Oxygen Mo2N@Ti3C2O2 Elcetrocatalyst for High Rates and High Energy Efficiency Li‐CO2 Batteries

O2-boosted Li-CO2 Battery Performance Via Microscopic Regulation

Additive Evolved Stabilized Dual Electrode-Electrolyte Interphases Propelling the High-Voltage Li||LiCoO 2 Batteries up to 4.7V

Dispersed Mn2Co2C nanoparticles in interconnected nitrogen-doped carbon framework as cathode catalysts for efficient and long-life Li-CO2 batteries

A Low-Charge-overpotential Lithium-Co2cell Based on a Binary Molten Salt Electrolyte

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li-CO<sub>2</sub> Batteries

Rechargeable LiCO2 Batteries with Graphdiyne As Efficient Metal‐Free Cathode Catalysts

High‐Capacity and Long‐Cycle Lifetime Li−CO2/O2 Battery Based on Dandelion‐like NiCo2O4 Hollow Microspheres

A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection

Transforming the Electrochemical Behaviors of Cobalt Oxide from "Supercapacitator" to "Battery" by Atomic‐Level Structure Engineering for Inspiring the Advance of Co‐Based Batteries

Gas Concentration-Driven LiOH Chemistry in Li-CO 2 Batteries

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage