Abstract:As a metallurgical and chemical raw material, electrolytic manganese is an important strategic resource. However, with the rapid development of the electrolytic manganese industry, the correct disposal of anode slime has become a serious problem. The purpose of this experiment was to reduce the occupation of land resources by the lead–containing waste residue of electrolytic manganese, reduce the pollution caused by the lead–containing waste residue to the environment and provide a reference for the research on the treatment technology and resource utilization of lead–containing waste residue in China. In this experiment, a special process was studied for the composition characteristics of lead–containing waste residues produced by electrolytic manganese. The acid leaching–enrichment–membrane electrolysis process was used to recover the lead in the lead–containing waste residues of electrolytic manganese and to recover the acid, so as to maximize the utilization of resources. In this experiment, the pretreated lead–containing waste residue was leached, enriched and concentrated, and then the enriched Pb2+ solution was used as cathode solution and dilute nitric acid as anode solution to recover lead by membrane electrolysis. The membrane electrolysis experiment uses lead plate as cathode, selects the best anion exchange membrane and anodic electrolysis material, and then takes lead recovery, acid recovery, current efficiency, voltage and power consumption as investigation indexes to explore and analyze the influence of many factors such as Pb2+ concentration and current density on the experiment, so as to determine the best membrane electrolysis process parameters. The optimum process parameters of lead recovery by membrane electrolysis were determined as follows: Pb2+ concentration was 40 g/L, current density was 30 mA/cm2, reaction temperature was 60 °C, cathodic pH value was 4.0, anodic HNO3 concentration was 0.5 mol/L, and cathodic ammonium nitrate concentration was 50 g/L. Under the optimal conditions, the current efficiency was 85.6%, the acid recovery was 73.03%, the lead recovery was 99.2%, the voltage was 3.8 V, and the power consumption was 1148.4 kW·h·t−1. Through the three steps of acid leaching–enrichment–membrane electrolysis, 78.53% of the Pb2+ in the original lead–containing waste residue can be recovered in the form of metal lead element, and the HNO3 recovered in the anode chamber can also be used again in the acid leaching process, which can not only solve the problem of environmental pollution caused by lead–containing waste residue but also achieve the recovery and utilization of resources, with good social and economic benefits.

Efficient disposal of lead anode slime for green separation and recycling of hazardous materials As, Sb, and Te

Separation and Enrichment of Au and Ag from Lead Anode Slime by a Selective Oxidation–Vacuum Volatilization–Carbon Reduction Process

Oxidation transformation and vacuum separation for direct preparation of antimony trioxide products from lead anode slime

An environmentally-friendly method to recover silver, copper and lead from copper anode slime by carbothermal reduction and super-gravity

Sustainable chemical reaction-free vacuum separation process to extract selenium from high-value-added hazardous selenium sludge

Advances in the Safe Disposal and Comprehensive Utilization of Spent Carbon Anode From Aluminum Electrolysis: Prospects for Extraction and Application of Carbon Resources From Hazardous Waste

Pollution-free Recycling of Lead and Sulfur from Spent Lead-Acid Batteries Via a Facile Vacuum Roasting Route

Clean hydrometallurgical route for highly efficient decontamination and recycling of multiple heavy metals from hazardous Pb smelting residues: Multi-objective leaching optimization, adsorption, and risk assessment

Efficient Desulfurizer Recycling during Spent Lead–Acid Batteries Paste Disposal by Zero‐Carbon Precursor Hypothermic Smelting

An effective separation process of arsenic, lead, and zinc from high arsenic-containing copper smelting ashes by alkali leaching followed by sulfide precipitation

Efficient Desulfurizer Recycling during Spent Lead-Acid Batteries Paste Disposal by Zero-Carbon Precursor Hypothermic Smelting

Recyclable Recovery of Lead from Zinc Hydrometallurgy Residue: By NH 4 Cl-MgCl 2 Leaching and Novel Cyclone-Electrowinning

An environmentally friendly system for high efficient silver recovery from anode slime

Comprehensive utilization and safe disposal of hazardous arsenic-alkali slag by the combination of beneficiation and metallurgy

Selective separation and recovery of selenium and mercury from hazardous acid sludge obtained from the acid-making process of copper smelting plants

Chemical-Free Method for Recovery of Lead from Spent Lead Paste by Reductive Sulfation Technique from By-product Utilization

Recovery and Utilization of Lead in Lead–Containing Waste Residue from Electrolytic Manganese Production

Separation of antimony from lead-antimony alloy by molten salt electrolysis

An Innovative Method for the Extraction of Metal from Waste Cathode Ray Tubes through a Mechanochemical Process Using 2-[Bis(carboxymethyl)amino]acetic Acid Chelating Reagent

Selective preparation of lithium carbonate from overhaul slag by high temperature sulfuric acid roasting - Water leaching

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism