Abstract:The anisotropic fracture characteristics of oil shale are crucial in determining reservoir modification parameters and pyrolysis efficiency during in situ oil shale pyrolysis. Therefore, understanding the mechanisms through which temperature and bedding planes influence the fracture behavior of oil shale is vital for advancing the industrialization of in situ pyrolysis technology. In this study, scanning electron microscopy (SEM), CT scanning, and a real-time high-temperature rock fracture toughness testing system were utilized to investigate the spatiotemporal evolution of pores and fractures in oil shale across a temperature range of 20–600 °C, as well as the corresponding evolution of fracture behavior. The results revealed the following: (1) At ambient temperature, oil shale primarily contains inorganic pores and fractures, with sizes ranging from 50 to 140 nm. In the low-temperature range (20–200 °C), heating primarily causes the inward closure of inorganic pores and the expansion of inorganic fractures along bedding planes. In the medium-temperature range (200–400 °C), organic pores and fractures begin to form at around 300 °C, and after 400 °C, the number of organic fractures increases significantly, predominantly along bedding planes. In the high-temperature range (400–600 °C), the number, size, and connectivity of matrix pores and fractures increase markedly with rising temperature, and clay minerals exhibit adhesion, forming vesicle-like structures. (2) At room temperature, fracture toughness is highest in the Arrester direction (KIC-Arr), followed by the Divider direction (KIC-Div), and lowest in the Short-Transverse direction (KIC-Shor). As the temperature increases from 20 °C to 600 °C, both KIC-Arr and KIC-Div initially decrease before increasing, reaching their minimum values at 400 °C and 500 °C, respectively, while KIC-Shor decreases continuously as the temperature increases. (3) The energy required for prefabricated cracks to propagate to failure in all three directions reaches a minimum at 100 °C. Beyond 100 °C, the absorbed energy for crack propagation along the Divider and Short-Transverse directions continues to increase, whereas for cracks propagating in the Arrester direction, the absorbed energy exhibits a 'W-shaped' pattern, with troughs at 100 °C and 400 °C. These findings provide essential data for reservoir modification during in situ oil shale pyrolysis.

Study on fracture propagation behavior of deep high-temperature shale gas based on the modified MERR criterion

Mixed-mode fracture behavior in deep shale reservoirs under different loading rates and temperatures

Hydraulic fracturing behaviors of shale under coupled stress and temperature conditions simulating different burial depths

Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach

Shale brittleness evaluation under high temperature and high confining stress based on energy evolution

Study on rock mechanics characteristics of deep shale in Luzhou block and the influence on reservoir fracturing

Multiple hydraulic fracture propagation simulation in deep shale gas reservoir considering thermal effects

Study on the influence of thermo-pressure coupling environment on the fracture properties of shale in deep reservoirs

Influence of Temperature and Bedding Planes on the Mode I Fracture Toughness and Fracture Energy of Oil Shale Under Real-Time High-Temperature Conditions

Fracturability of Shale Based on Rock Brittleness and Natural Fracture Tensile Reactivation

Dynamic impact experimental and global cohesive element method to shale fracture characterization

The development of rock fracture from microfracturing to main fracture formation

Investigation of crack propagation behavior on shales with different inclination based on ultra-fast time resolution method

Experimental Study on Mechanical, Brittleness, and Fracture Behavior of Deep Shales Subjected to Fracturing Fluid-Shale Interactions at Reservoir Temperature and In-Situ Stress Conditions

The influence of SC-CO 2 on the shales' fracture behavior described by using ultra-fast time resolution method and the damage fracture constitutive model: A case study of the Cretaceous Qingshankou formation in Gulong Depression, Songliao Basin, NE China

Experimental and numerical study on dynamic mechanical behaviors of shale under true triaxial compression at high strain rate

A laboratory study of microcracks variations in shale induced by temperature change

Theoretical and experimental exploration on the combined mode I + III fracture toughness of shale using the edge-notched disk bending method with acoustic emission monitoring

Fracture characteristics and thermal damage mechanism of shale under microwave radiation

Numerical experimental study on the fracture process of shale containing internal prefabricated cracks based on CT scanning with different quartz contents

Numerical simulation on hydraulic fracture propagation in laminated shale based on thermo-hydro-mechanical-damage coupling model