Abstract:To elucidate the mechanisms underlying the alteration of shale pore fractures by high-temperature supercritical carbon dioxide (ScCO 2 ), this study employed medium–low maturity shale samples from a specific region as research subjects. The samples were subjected to high-temperature ScCO 2 reactions in a corrosion-resistant high-pressure reaction vessel at various temperatures. A suite of analytical techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), ImageJ image processing software, N 2 and CO 2 adsorption experiments, thermal gravimetric-differential thermal analysis (TG-DTG) of CO 2 pyrolyzed shale oil, and gas chromatography (GC) analysis, were utilized to investigate and analyze the microstructural changes in the shale samples before and after ScCO 2 treatment. The results reveal a subtle increase in the content of clay minerals and quartz, accompanied by a decrease in the content of carbonates, potassium feldspar, and calcite. These mineral transformations, encompassing dissolution, precipitation, and swelling processes, exert a substantial impact on the shale surface microstructure and modify the internal pore structure. Consequently, a shift in the mechanical properties of the rock is observed, which bears significance for its fracturing behavior. The experimental results reveal a steady growth in fracture area following high-temperature ScCO 2 treatment. Importantly, the extent of initial fracture development plays a crucial role in determining the efficacy of hydraulic fracturing, indicating a positive correlation. Moreover, the connection between fracture area and temperature exhibits a clear trend marked by an initial rise, a subsequent decline, and finally, a resurgence. In particular, the thermal fracturing threshold temperature for the shale samples was found to be around 400 °C. From the analysis, it can be inferred that ScCO 2 , when subjected to an elevated temperature range of 100-200°C, exhibits mutual interactions with the shale. This results in effective extraction of organic matter and dissolution of mineral constituents within the shale matrix. Consequently, this treatment process leads to a significant reduction in the number of micropores (pore sizes less than 2 nm), while the quantities of mesopores (pore sizes between 2 and 50 nm) and macropores (pore sizes greater than 50 nm) display a noticeable increase. Upon exposure to a temperature range of 200-300°C, a remarkable affinity of the shale for CO 2 adsorption becomes evident. The adsorption process contributes to the expansion of the matrix material and deposition of minerals, effectively filling the pore spaces. As a result, the contraction of mesopores and macropores is mitigated, with the predominant change being an increase in the number of micropores. When temperatures reach 300-500°C, the intensified heat initiates thermal decomposition of the kerogen, culminating in the release of pore spaces. This phenomenon prompts an increase in the number of micropores and mesopores, thereby augmenting the pore volume and specific surface area of the shale.

A laboratory study of microcracks variations in shale induced by temperature change

The development of rock fracture from microfracturing to main fracture formation

Experimental investigation on micro-fracture evolution and fracture permeability of oil shale heated by water vapor

Experimental Study on Mechanical, Brittleness, and Fracture Behavior of Deep Shales Subjected to Fracturing Fluid-Shale Interactions at Reservoir Temperature and In-Situ Stress Conditions

Hydraulic fracturing behaviors of shale under coupled stress and temperature conditions simulating different burial depths

Study on fracture propagation behavior of deep high-temperature shale gas based on the modified MERR criterion

Fracture characteristics and thermal damage mechanism of shale under microwave radiation

Study on the influence of thermo-pressure coupling environment on the fracture properties of shale in deep reservoirs

Experimental study on crack propagation and failure mode of fissured shale under uniaxial compression

Study on rock mechanics characteristics of deep shale in Luzhou block and the influence on reservoir fracturing

Influence of Temperature and Bedding Planes on the Mode I Fracture Toughness and Fracture Energy of Oil Shale Under Real-Time High-Temperature Conditions

Numerical simulation on hydraulic fracture propagation in laminated shale based on thermo-hydro-mechanical-damage coupling model

Reservoir-scale study of oil shale hydration swelling and thermal expansion after hydraulic fracturing

Numerical simulation of hydraulic fracture propagation after thermal shock in shale reservoir

Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach

Insights into the Effect of Spontaneous Fluid Imbibition on the Formation Mechanism of Fracture Networks in Brittle Shale: An Experimental Investigation

Experimental investigation of a fissured rock with thermal storage potential subjected to descending amplitude low cycle impacts

Investigation on the Fracture-Pore Evolution and Percolation Characteristics of Oil Shale under Different Temperatures

Mechanism of pore expansion and fracturing effect of high-temperature ScCO 2 on shale

Implications of Temperature for the Modification of High-Overmature Shale Reservoirs: Experimental and Numerical Analysis

The Statistical Damage Constitutive Model of Longmaxi Shale under High Temperature and High Pressure