Abstract:The development of a novel adsorbent based on Sn(II) oxy-hydroxide nanoparticles and the optimization of main synthesis parameters was examined for the efficient removal of hexavalent chromium at low residual concentration levels. The aqueous hydrolysis of Sn(II) salts in a continuous-flow process was evaluated as an effective method to synthesize an appropriate material able to operate both as an electron donor for Cr(VI) reduction, and provide a suitable crystal structure that favors strong complexation with the formed Cr(III) species. Experimental results revealed that the main hydrolysis parameters, such as pH value and tin origin/source, can be used to determine the chemical formula of the produced materials and thereby, eventually improve their uptake capacity for Cr(VI). Among the tested sorbent materials, the synthetic nanostructured hydroromarchite, Sn6O4(OH)4, prepared by the hydrolysis of SnCl2 in a highly acidic environment (pH2), was deemed the best sorbent material and it was further investigated for its Cr(VI) uptake performance under reliable conditions (column experiments) for drinking water treatment. Specifically, Rapid Small-Scale (laboratory) Column Tests indicated that aggregates of the Sn6O4(OH)4 nanomaterial can achieve a maximum uptake capacity of around 19mg/g, keeping the levels of outflow Cr(VI) below 10μg/L during the treatment of natural-like water at pH7. The high efficiency is mainly attributed to the stabilization of Sn(II) content in nanoparticles, as well as the improved surface charge density, reaching 1.0mmol[OH-]/g, whereas the obtained thermodynamic data indicate a combined reduction-sorption process. The latter aspect was further verified by XPS, showing that even in the highly-loaded sorbent materials with adsorbed chromium, its trivalent form is the predominant one. These specific characteristics suggest that the product is a more favorable candidate for wider applications in water treatment units, regarding Cr(VI) removal, compared to other examined sorbent materials.

Optimization of the use of mother liquor in the synthesis of HKUST-1 and their performance for removal of chromium (VI) in aqueous solutions

Simultaneous improvement of water stability and performance of HKUST-1 for fast cadmium removal from the water environment: synthesis, characterization, RSM optimization, thermodynamics and kinetics

Spherical Cu<sub>2</sub>O-Fe<sub>3</sub>O<sub>4</sub>@chitosan bifunctional catalyst for coupled Cr-organic complex oxidation and Cr(VI) capture-reduction

The use of Sn(II) oxy-hydroxides for the effective removal of Cr(VI) from water: Optimization of synthesis parameters

Optimization of hexavalent chromium ion adsorption using natural silica modified with DMA (Dimethylamine) by batch method

Preparation of quaternary amine-grafted organosolv lignin biosorbent and its application in the treatment of hexavalent chromium polluted water

Toxic chromium treatment induce amino-assisted electrostatic adsorption for the synthesis of highly dispersed chromium catalyst

Selective and Efficient Photoextraction of Aqueous Cr(VI) As a Solid-State Polyhydroxy Cr(V) Complex for Environmental Remediation and Resource Recovery.

Synthesis of UiO-66 with addition of HKUST-1 for enhanced adsorption of RBBR dye

Efficient removal of chromate from wastewater using a one-pot synthesis of chitosan cross-linked ceria incorporated hydrous copper oxide bio-polymeric composite

Fabrication of Hydrotalcite-like Copper Hydroxyl Salts as a Photocatalyst and Adsorbent for Hexavalent Chromium Removal

Application of response surface methodology to optimize chromium (VI) removal from aqueous solution using pre‐treated sawdust

Adsorption of chromium by functionalized metal organic frameworks from aqueous solution

Evenly distribution of amorphous iron sulfides on reconstructed Mg-Al hydrotalcites for improving Cr(VI) removal efficiency

Thermal Stability Improvement of Cu-Based Catalyst by Hydrophobic Modification in Methanol Synthesis

Tin Oxide Nanoparticles via Solar Vapor Deposition for Hexavalent Chromium Remediation

Construction of the Z-Scheme Heterogeneous HKUST-1/BiVO4 Nanorod Composite for Enhanced Piezo-Photocatalytic Reduction Performance of Cr(VI)

Surface Modified Leaves with High Efficiency for the Removal of Aqueous Cr (VI)

Equilibrium and Kinetics Studies of Hexavalent Chromium Biosorption by Luffa Cylindrica using Optimised 1,5-Diphenylcarbazide Method

Solvent-Free Synthesis of HKUST-1 with Abundant Defect Sites and Its Catalytic Performance in the Esterification Reaction of Oleic Acid

Rapid mechanochemical construction of HKUST-1 with enhancing water stability by hybrid ligands assembly strategy for efficient adsorption of SF6