Abstract:Challenging molecular separation tasks continue to drive the need for advanced membranes, which could combine high productivity and selectivity with outstanding chemical resistance and mechanical robustness. Here, ultra-thin, sub-100 nm carbon molecular sieve (CMS) membranes based on a polymer of intrinsic microporosity precursor were fabricated and characterized with respect to their separation performance for six gases, He, H2, N2, O2, CO2 and CH4. The rarely reported in thin CMS membranes physical aging was tracked until near-equilibrium was reached. The use of commercially available, small pore size (2–5 nm) γ-alumina-coated α-alumina ceramic supports allowed for an easy membrane precursor fabrication by a simple solution coating process. The subsequent application of a protective polydimethylsiloxane layer, as often done in research and membrane production, assured excellent defect control and produced CMS composite membranes with very high membrane permselectivities (e.g. CO2/CH4 = 84.5, H2/CH4 = 360). No significant deviations from bulk properties in terms of the chemical decomposition were discovered in the film thickness range of 60–300 nm. However, a surprisingly massive acceleration of the physical aging in comparison to the bulk was detected in all sub-100 nm membranes including the precursor polymer. All CMS membranes reached near-equilibrium gas transport properties within 1–1.5 months providing a rare opportunity to study aging-stabilized performance. For the aging-stabilized sub-100 nm membranes a decrease in gas permeabilities of up to 3 orders of magnitude was detected. Remarkably, sub-100 nm CMS membranes showed significantly increased selectivities typical to thick isotropic CMS membranes pyrolyzed at 100–200 °C higher temperatures. A clear aging-related shift to more significant size sieving behavior occurred for the majority of the studied CMS membranes throughout the aging period. Overall, our study provides an important observation that excessive reduction of the selective layer thickness, especially in initially highly microporous materials (PIMs, CMS etc.), may not present the best strategy for the optimization of the long-term membrane performance.

Hyperaging Tuning of a Carbon Molecular‐Sieve Hollow Fiber Membrane with Extraordinary Gas‐Separation Performance and Stability

Surprising olefin/paraffin separation performance recovery of highly aged carbon molecular sieve hollow fiber membranes by a super-hyperaging treatment

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Innenrücktitelbild: Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by In Situ Polymerization (Angew. Chem. 11/2020)

Sub-100 nm carbon molecular sieve membranes from a polymer of intrinsic microporosity precursor: Physical aging and near-equilibrium gas separation properties

Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Aging-resistant carbon molecular sieve membrane derived from pre-crosslinked Matrimid® for propylene/propane separation

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

PI/NCC- based carbon molecular sieve membranes for Hydrogen purification: Effect of aging times

Carbon molecular sieve membranes: a promising alternative for selected industrial applications

Carbon hollow fiber membranes for a molecular sieve with precise-cutoff ultramicropores for superior hydrogen separation

Physical aging in carbon molecular sieve membranes

Simultaneously enhanced gas permeability, selectivity and aging stability of carbon molecular sieve membranes by the molecule doping of silicon

Tailoring sub-3.3 Å ultramicropores in advanced carbon molecular sieve membranes for blue hydrogen production

New Insights into Physical Aging‐Induced Structure Evolution in Carbon Molecular Sieve Membranes

Reduced Aging in Carbon Molecular Sieve Membranes Derived from PIM-1 and MOP-18

Mitigated Aging in a Defective Metal–Organic Framework Pillared Polymer of an Intrinsic Porosity Hybrid Membrane for Efficient Gas Separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Carbon molecular sieve/ZSM-5 mixed matrix membranes with enhanced gas separation performance and the performance recovery of the aging membranes

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

Carbon molecular sieve membranes derived from crosslinkable polyimides for CO2/CH4 and C2H4/C2H6 separations