Abstract:Challenging molecular separation tasks continue to drive the need for advanced membranes, which could combine high productivity and selectivity with outstanding chemical resistance and mechanical robustness. Here, ultra-thin, sub-100 nm carbon molecular sieve (CMS) membranes based on a polymer of intrinsic microporosity precursor were fabricated and characterized with respect to their separation performance for six gases, He, H2, N2, O2, CO2 and CH4. The rarely reported in thin CMS membranes physical aging was tracked until near-equilibrium was reached. The use of commercially available, small pore size (2–5 nm) γ-alumina-coated α-alumina ceramic supports allowed for an easy membrane precursor fabrication by a simple solution coating process. The subsequent application of a protective polydimethylsiloxane layer, as often done in research and membrane production, assured excellent defect control and produced CMS composite membranes with very high membrane permselectivities (e.g. CO2/CH4 = 84.5, H2/CH4 = 360). No significant deviations from bulk properties in terms of the chemical decomposition were discovered in the film thickness range of 60–300 nm. However, a surprisingly massive acceleration of the physical aging in comparison to the bulk was detected in all sub-100 nm membranes including the precursor polymer. All CMS membranes reached near-equilibrium gas transport properties within 1–1.5 months providing a rare opportunity to study aging-stabilized performance. For the aging-stabilized sub-100 nm membranes a decrease in gas permeabilities of up to 3 orders of magnitude was detected. Remarkably, sub-100 nm CMS membranes showed significantly increased selectivities typical to thick isotropic CMS membranes pyrolyzed at 100–200 °C higher temperatures. A clear aging-related shift to more significant size sieving behavior occurred for the majority of the studied CMS membranes throughout the aging period. Overall, our study provides an important observation that excessive reduction of the selective layer thickness, especially in initially highly microporous materials (PIMs, CMS etc.), may not present the best strategy for the optimization of the long-term membrane performance.

Mitigated Aging in a Defective Metal–Organic Framework Pillared Polymer of an Intrinsic Porosity Hybrid Membrane for Efficient Gas Separation

Reduced Aging in Carbon Molecular Sieve Membranes Derived from PIM-1 and MOP-18

High Gas Permeability in Aged Superglassy Membranes with Nanosized UiO-66-NH2 /cPIM-1 Network Fillers

Metal‐Coordinated, Dual‐Crosslinked PIM Polymer Membranes for Upgraded CO2 Separation: Aging and Plasticization Resistance

Amidoxime Modified UiO-66@PIM-1 Mixed-Matrix Membranes to Enhance CO2 Separation and Anti-Aging Performance

Physical Aging Investigations of a Spirobisindane-Locked Polymer of Intrinsic Microporosity

Simultaneously enhanced gas separation and anti-aging performance of intrinsic microporous polyimide by dibromo substitution

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Improving Aging Resistance of PIM‐1 Thin Films by Nano‐tio2 Filler Used for Robust Solvent Permeation

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

Molecular Mobility and Gas Transport Properties of Mixed Matrix Membranes Based on PIM-1 and a Phosphinine Containing Covalent Organic Framework

Sub-100 nm carbon molecular sieve membranes from a polymer of intrinsic microporosity precursor: Physical aging and near-equilibrium gas separation properties

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation

Improving aging resistance of PIM ‐1 thin films by nano‐TiO 2 filler used for robust solvent permeation

Defect Engineering in Metal–Organic Frameworks Towards Advanced Mixed Matrix Membranes for Efficient Propylene/Propane Separation

Effect of Temperature-Induced Aging on the Gas Permeation Behavior of Thin Film Composite Membranes of PIM-1 and Carboxylated PIM-1

Aging-resistant carbon molecular sieve membrane derived from pre-crosslinked Matrimid® for propylene/propane separation

Dormancy and double-activation strategy for construction of high-performance mixed-matrix membranes

Mitigation of Physical Aging of Polymeric Membrane Materials for Gas Separation: A Review

Mixed matrix membranes (MMMs) using an emerging metal-organic framework (MUF-15) for CO2 separation