[Psychological reactions of patients with ischemic heart disease to aortocoronary bypass].

V. Zaitsev,T. A. Aǐvazian,R. Akchurin,N. I. Gracheva,A. Rubanovich,A. G. Shafikova

Kardiologiia

Abstract:

What problem does this paper attempt to address?

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Minghui Wang,Junjie Zhao,Xiaoxue Wang,Andong Liu,Karen K. Gleason

DOI: https://doi.org/10.1039/c7ta01862b

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Polymeric membranes have been applied in industrial gas separations for decades. Competing technologies, such as cryogenic distillation and sorption processes, require the gases to be either condensed or thermally regenerated from the sorbents. In contrast, membrane gas separation does not involve phase transition, representing the potential for a more energy efficient and eco-friendly separation process. However, the overall energy consumption by membrane gas separation is highly dependent on the quality of the membrane employed for the separation process. With the goal of reducing the energy input needed for creating the transmembrane pressure difference, numerous bulk polymers have been investigated. However, less effort has been devoted to processing polymers into ultrathin membranes and investigating their gas permeation properties, which can be quite different from their bulk counterparts. This review summarizes recent advances in fabricating ultrathin gas-selective polymeric membranes. Several classes of ultrathin polymeric membranes are highlighted: microporous polymers, facilitated transport polymeric membranes, Langmuir-Blodgett (LB) films and Layer-by-Layer (LbL) deposited polyelectrolyte multilayers (PEMs), polyamides and other commercial polymers. The application of gas-selective polymeric membranes beyond gas separation is also included as a meaningful extension to this review.
Plasma Polymerized Coatings on Hollow Fiber Membranes-Applications and Their Aging Characteristics in Different Media

Ashok K Sharma,Stephen P Conover,Kamalesh K Sirkar

DOI: https://doi.org/10.3390/membranes12070656

2022-06-26

Abstract:In the past 30 years, plasma polymerization has emerged as a versatile technique for depositing ultrathin nanocoating on a variety of substrates for applications that range from providing lubricity to the substrate, protection from harsh environments, promoting adhesion, surface modification to applications of coating in ultrafiltration and gas separation membranes. Applications in the field of volatile organic compound (VOC) recovery and membrane distillation have also gained importance in recent years. Most of these applications use silicone and fluorosilicone-based plasma polymers that provide versatility, good separation characteristics, and long-term stability to the membrane. However, plasma polymers are known to age with time. The current study focuses on the aging behavior of silicone and fluorosilicone plasma polymers in different environments that include air, ionized air, heat, aqueous solutions of inorganic chemicals, as well as harsh solvents such as hexane, dichloromethane (DCM), and toluene. Membrane gas permeance and gas selectivity were used to quantitatively measure the aging behavior of the coatings on gas separation membranes, while water and VOC flux were used to measure the effect of aging for membranes designed for membrane distillation and VOC separation. It was found that while all plasma polymers of this study showed changes in membrane gas permeance on exposure to air, they fundamentally retained their membrane separation characteristics in all the studied environments. Significant changes in gas permeability characteristics were observed on exposure of the membranes to organic solvents like dichloromethane, 2-propanol, hexane, and toluene, which are attributed to dimensional changes in the hollow fiber substrate rather than changes in plasma polymer characteristics. Ionized air was also found to have a significant effect on the gas permeability characteristic of the membranes, reducing the gas permeance by as much as 50% in some cases. This is attributed to accelerated oxidation and crosslinking of the polymer in ionized air. XPS studies showed an increase in the oxygen content of the polymer on aging. Differences were found in the aging behavior of polymer coatings made from different monomers with long-chain monomers such as hexamethyltrisiloxane offering more stable coatings. The cross-link density of the polymer also influenced the aging behavior, with the more cross-linked polymer showing a lesser influence on aging in a chemical environment. No significant effect of aging was found on applications of these polymer coatings in the field of membrane distillation, pervaporation, and VOC removal, and a stable performance was observed over a long period of time. It was also noted that the selection of co-monomers played a significant role in membrane distillation, with polymers forming fluoro co-monomers giving better results. The current study also demonstrated the usefulness of plasma polymers in controlling the pore size of microporous membranes that can find useful applications in bio-filtration and VOC recovery.
Mitigated Aging in a Defective Metal–Organic Framework Pillared Polymer of an Intrinsic Porosity Hybrid Membrane for Efficient Gas Separation

Chenxu Geng,Yuxiu Sun,Zhengqing Zhang,Zhihua Qiao,Chongli Zhong

DOI: https://doi.org/10.1021/acssuschemeng.1c08485

2022-03-07

Abstract:Although polymers of intrinsic microporosity (PIMs) have been recognized as highly permeable membrane materials in gas separation, the physical aging phenomenon seriously affected their performance due to the collapse of micropores. In this work, we report an alternative approach to alleviate the physical aging of PIM-based membranes, as demonstrated by pillaring the PIM-1 membrane with defect-engineered metal–organic framework (MOF) nanoparticles. With excellent interfacial compatibility between the defective UiO-66-FA and PIM-1 by the formation of hydrogen-bond networks, the incorporated MOF nanoparticles acted as pillars of the resulting mixed matrix membranes (UiO-66-FA/PIM-1 MMM) to prevent the collapse of the micropores of the PIM-1 membrane and hence reduce its aging. Concurrently, defective MOFs in the polymer matrix endow the resulting MMMs with fast diffusion pathways and facilitate CO2 transport. Compared with the pristine PIM-1 membrane, UiO-66-FA/PIM-1 MMM displayed maintained CO2/N2 selectivity of about 23.1 but a sharp increased CO2 permeability from 3980 to 16,591 barrer. Only a 25% reduction in CO2 permeability was observed for the UiO-66-FA/PIM-1 MMM after 160 days of operation under the mixed-gas CO2/N2 separation conditions, which is less than the equivalent losses of 40 and 76% for the counterpart MOF-based hybrid membrane and PIM-1, respectively. Given that the performances of the resulting membranes far surpass the 2008 Robeson upper bound, this study may provide a feasible way for sustainable development of PIM-based MMMs in gas separation application.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c08485.Experimental details about PALS measurements; stability and aging tests; diffusion and solubility coefficient tests; SEM image, FT-IR spectra, and PXRD patterns of defective UiO-66-FA nanoparticles; and PXRD patterns and FT-IR spectra and cross-sectional SEM images of MMMs (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Physical Aging of Glassy Perfluoropolymers in Thin Film Composite Membranes. Part Ii. Glass Transition Temperature and the Free Volume Model

Milad Yavari,Sajjad Maruf,Yifu Ding,Haiqing Lin

DOI: https://doi.org/10.1016/j.memsci.2016.08.033

IF: 9.5

2017-01-01

Journal of Membrane Science

Abstract:Thin film composite (TFC) membranes for gas separation often comprise a thin selective layer of a glassy polymer, which, however, suffers from physical aging, i.e., gas permeance decreases with time. This study aims to provide a mechanistic understanding of the effect of physical aging on permeance reduction in TFC membranes. The Part I study reports gas permeances in two-layer TFC membranes comprising perfluoropolymers of Teflon® AF or Hyflon® AD with thicknesses of 50–400nm. In this Part II study, apparent glass transition temperature (Tg) of thin selective layers was determined in situ over time using a nano-thermal analysis (nano-TA). Physical aging decreases gas permeances and increases apparent Tg, and the rate of changes is more significant for thinner selective layers. For example, N2 permeance decreases from 1000 gpu to 550 gpu while apparent Tg increases from 160°C to 172°C after aging for 2000h in a membrane with 100-nm-thick Teflon AF1600. The measured Tg values are used to derive polymer fractional free volume and physical aging rate. A simplified free volume model is used to successfully correlate the gas permeance reduction with Tg increase during physical aging. Polymers with good stability of permeability should have low physical aging rate and high fractional free volume.
Advancements in Gas Separation for Energy Applications: Exploring the Potential of Polymer Membranes with Intrinsic Microporosity (PIM)

Carmela Astorino,Eugenio De Nardo,Stefania Lettieri,Giuseppe Ferraro,Candido Fabrizio Pirri,Sergio Bocchini

DOI: https://doi.org/10.3390/membranes13120903

2023-12-06

Abstract:Membrane-based Polymers of Intrinsic Microporosity (PIMs) are promising candidates for energy-efficient industrial gas separations, especially for the separation of carbon dioxide over methane (CO2/CH4) and carbon dioxide over nitrogen (CO2/N2) for natural gas/biogas upgrading and carbon capture from flue gases, respectively. Compared to other separation techniques, membrane separations offer potential energy and cost savings. Ultra-permeable PIM-based polymers are currently leading the trade-off between permeability and selectivity for gas separations, particularly in CO2/CH4 and CO2/N2. These membranes show a significant improvement in performance and fall within a linear correlation on benchmark Robeson plots, which are parallel to, but significantly above, the CO2/CH4 and CO2/N2 Robeson upper bounds. This improvement is expected to enhance the credibility of polymer membranes for CO2 separations and stimulate further research in polymer science and applied engineering to develop membrane systems for these CO2 separations, which are critical to energy and environmental sustainability. This review aims to highlight the state-of-the-art strategies employed to enhance gas separation performances in PIM-based membranes while also mitigating aging effects. These strategies include chemical post-modification, crosslinking, UV and thermal treatment of PIM, as well as the incorporation of nanofillers in the polymeric matrix.
Elucidating the Molecular Mechanisms by which Porous Polymer Networks Affect Structure, Aging Propensity, and Selectivity of Microporous Glassy Polymer Membranes using a Multiscale Approach

Lucas C. Condes,Matthew T. Webb,Tran T. B. Le,William J. Box,Cara M. Doherty,Aditi Gali,Leoncio Garrido,Jing Deng,Laura Matesanz-Niño,Angel E. Lozano,Cristina Alvarez,Marco Buongiorno Nardelli,Alberto Striolo,Anita J. Hill,Michele Galizia

DOI: https://doi.org/10.1021/acsami.4c11472

IF: 9.5

2024-09-26

ACS Applied Materials & Interfaces

Abstract:Microporous glassy polymer membranes suffer from physical aging, which adversely affects their performance in the short time frame. We show that the aging propensity of a model microporous polymer, poly(1-trimethylsilyl-1-propyne) (PTMSP), can be effectively mitigated by blending with as little as 5 wt % porous polymer network (PPN) composed of triptycene and isatin. The aging behavior of these materials was monitored via N(2) pure gas permeability measurements over the course of 3 weeks,...

materials science, multidisciplinary,nanoscience & nanotechnology
RADAR PRECIPITATION ESTIMATES IN MOUNTAINOUS REGIONS : CORRECTIONS FOR PARTIAL BEAM BLOCKAGE AND GENERAL RADAR COVERAGE LIMITATIONS

Dennis A. Miller,D. Kitzmiller,Shaorong Wu,R. Setzenfand

Abstract:
Impact of Sub-Ambient Temperature on Aging Rate and Gas Separation Properties of Polymers of Intrinsic Microporosity

Pierre Dieudonné,Riccardo Rea,Elsa Lasseuguette,Maria-Chiara Ferrari

DOI: https://doi.org/10.3390/membranes14060132

IF: 4.562

2024-06-07

Membranes

Abstract:Aging in polymers of intrinsic microporosity has slowed exploitation due to a decay in performance over time since densification makes them unsuitable for industrial applications. This work aimed to study the impact of the operation and storage temperature on the gas separation properties and aging rates of PIM-1 self-standing films. The permeability, diffusivity, and solubility of the tested membranes were monitored through permeation tests for pure carbon dioxide and nitrogen at a maximum upstream pressure of 1.3 bar for temperatures ranging from −20 °C to 25 °C. This study found significant benefits in the operation of glassy polymeric membranes at low temperatures, resulting in a favourable trade-off in separation performance and a reduction in the aging rate by three orders of magnitude. This brings new opportunities for the industrial application of PIMs in innovative carbon capture processes.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
High Gas Permeability in Aged Superglassy Membranes with Nanosized UiO-66-NH2 /cPIM-1 Network Fillers

Boya Qiu,Ming Yu,Jose Miguel Luque-Alled,Shengzhe Ding,Andrew B Foster,Peter M Budd,Xiaolei Fan,Patricia Gorgojo

DOI: https://doi.org/10.1002/anie.202316356

2024-01-02

Abstract:Superglassy membranes synthesised by polymers of intrinsic microporosity (PIMs) suffer from physical aging and show poor gas permeance over time, especially thin membranes, due to the fast rearrangement of nonequilibrium polymer chains. Herein, we constructed a novel PIM-1 thin film nanocomposite membrane (TFN) using nanosized UiO-66-NH2 (≈10 nm)/carboxylated PIM-1 (cPIM-1) as the composite filler. Unlike conventional fillers, which interact with the polymer only via the surface, the UiO-66-NH2 /cPIM-1 forms a stable three-dimensional (3D) network intertwining with the polymer chains, being very effective to impede chain relaxation, and thus physical aging. Nanosizing of UiO-66-NH2 was achieved by regulating the nucleation kinetics using carbon quantum dots (CQD) during the synthesis. This led to increased surface area, and hence more functional groups to bond with cPIM-1 (via hydrogen bonding between -NH2 and -COOH groups), which also improved interfacial compatibility between the 3D network and polymer chains avoiding defect formation. As a result, the novel TFN showed significantly improved performance in gas separation along with reduced aging (i.e. ≈6 % loss in CO2 permeability over 63 days); the aged membranes had a CO2 permeance of 2504 GPU and ideal selectivity values of 37.2 and 23.8 for CO2 /N2 and CO2 /CH4 , respectively.
Physical aging in carbon molecular sieve membranes

Liren Xu,Meha Rungta,John Hessler,Wulin Qiu,Mark Brayden,Marcos Martinez,Gregory Barbay,William J. Koros

DOI: https://doi.org/10.1016/j.carbon.2014.08.051

IF: 10.9

2014-12-01

Carbon

Abstract:This paper considers physical aging in carbon molecular sieve (CMS) membranes. Moreover, the performance of stabilized membranes under practical operating conditions is discussed. Physical aging has been studied extensively in glassy polymers, but aging in CMS membranes has previously focused primarily on adsorption: either chemisorption of oxygen, or physical adsorption of water and organics in the pore structures. Experimentally, in this study, for the samples considered, all of the above adsorption-induced aging mechanisms were excluded as significant factors through thoughtful experimental design. Physical aging appears to be the primary cause for rapid changes of transport properties in early stages after membrane fabrication for samples derived from high fractional free volume precursors. The CMS pores are believed to age analogously to the “unrelaxed free volume” in glassy polymers. Over time, these pores tend to shrink in order to achieve thermodynamically more stable states. Results of sorption tests in CMS also support the above hypothesis. The significance of physical aging phenomena on membrane testing protocols, structural tailoring, and performance evaluation are discussed. A long term permeation test demonstrated excellent stability of stabilized CMS membranes under realistic conditions.

materials science, multidisciplinary,chemistry, physical
High performance polymers for membrane separation

L.M. Robeson,W.F. Burgoyne,M. Langsam,A.C. Savoca,C.F. Tien

DOI: https://doi.org/10.1016/0032-3861(94)90651-3

IF: 4.6

1994-11-01

Polymer

Abstract:Polymers have been recognized to exhibit selective permeation rates to gases for more than a century. The commercial reality of this characteristic, however, occurred in the late 1970s. There has been significant commercial activity in this area which has also brought about a rapid increase in the study of polymeric structural variations to optimize the combination of gas separation and permeability (permselectivity). It has been recently noted that upper bound limits exist for the separation of common gas pairs. These limitations will be discussed along with the structural features necessary to achieve the best combination of high permeability combined with high selectivity. One of the speciality polymers receiving significant attention in the past decade is poly(trimethylsilylpropyne) (PTMSP) primarily due to a permeability to common gases an order of magnitude higher than silicone rubber. Structural variations, solvent variations, non-solvent swelling effects and flux decline of PTMSP are discussed. Flux decline, which has been reported in detail in the literature, is believed to be due to two factors. Contamination can significantly decrease permeability which comprises the reason behind many literature citations. Another factor involves a slow collapse of the structure (as cast) which can depend on the casting solvent. Non-solvent swelling promotes an instantaneous increase in permeability which slowly decays back to original values. High glass transition temperature engineering polymers (e.g. polyimides, polyarylates, polycarbonates) yield permselectivity characteristics of interest for gas separation. Structural features and variations of these polymers to achieve high permeability combined with selectivity (e.g. upper bound properties) will be discussed. Surface modification techniques comprise another route to achieve high selectivity for permeable polymers. These methods (e.g. fluorination, plasma modification, u.v. exposure) offer an additional route towards meeting the requirements for separation of gases with polymeric membranes.

polymer science
Recent 10-year development on surface modification of polymeric hollow fiber membranes via surface coating approach for gas separation: a review

Rosyiela Azwa Roslan,Woei Jye Lau,Ahmad Fauzi Ismail,Sutrasno Kartohardjono

DOI: https://doi.org/10.1007/s10853-024-09759-2

IF: 4.5

2024-05-30

Journal of Materials Science

Abstract:Polymeric membranes have emerged as a competitive technology in gas separation processes due to their notable energy efficiency, environmentally friendly attributes and minimal system footprint. To enhance the performance of conventional polymeric membranes, significant research efforts have been dedicated to modifying their surface properties in the last decade. Among the various techniques explored, membrane surface modification using coating methods, such as dip-coating, spray-coating, grafting and interfacial polymerization stands out as one of the most popular and straightforward approaches. Scientists have utilized a diverse array of coating solutions comprising either polymeric materials or hybrid materials in these methods, yielding promising outcomes. This article aims to present a comprehensive review of the advancements made in surface coating approaches employed for modifying hollow fiber membrane surfaces over the past decade. The review encompasses an evaluation of how different coating approaches and solutions affect the surface's physicochemical properties and the gas separation performance of the membranes. Furthermore, the article delves into discussing technical challenges associated with these surface coating approaches, providing an insightful analysis. Lastly, the review concludes by outlining perspectives and recommending future research directions for this area of study, highlighting the potential avenues for innovation and advancement in surface-coated hollow fiber membranes for gas separation applications.

materials science, multidisciplinary
Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Guozhen Liu,Renhao Li,Xi Chen,Long Cheng,Yu Liu,Gongping Liu,Wanqin Jin

DOI: https://doi.org/10.1016/j.seppur.2023.123459

IF: 8.6

2023-05-01

Separation and Purification Technology

Abstract:Carbon molecular sieve (CMS) membranes with exceptional separation performance and scalable processing are promising for precise gas separation. However, their broad applicability is hampered owing to stability issues, mainly resulting from physical aging. Herein, we manipulate the pyrolysis temperature (550 °C, 650 °C and 750 °C) to regulate the gas transport properties and control the physical aging of CMS membranes derived from 6FDA-DAM polyimide. The morphology, chemical composition and pore size of the membranes were characterized using SEM, IR, XPS and XRD. Results demonstrated that the pore structure of CMS membranes shows densification with increasing the pyrolysis temperature, affording enhanced separation efficiency for gas pairs: H2/N2, H2/CH4, and CO2/CH4 pairs based on the size-sieving effect. Moreover, the effect of aging is more considerable for membranes pyrolyzed at a higher temperature. In addition, the membrane subjected to pre-aging treatment via vacuum storage exhibit better, stable gas separation performance beyond the upper-bond for polymeric membranes. The separation mechanism of the CMS membranes reveals that gas permeation behavior is dominated by diffusion. Tailoring gas permeation and physical aging can provide an alternative approach to tune the gas transport properties of CMS membranes.

engineering, chemical
Recent development of polyimides: Synthesis, processing, and application in gas separation

Zhen Xu,Zacary L. Croft,Dong Guo,Ke Cao,Guoliang Liu

DOI: https://doi.org/10.1002/pol.20210001

IF: 3.046

2021-01-01

Journal of Polymer Science

Abstract:High-performance polymers have been concomitant with advanced technology for half a century. With the advancement of synthetic chemistry, the recent development of high-performance polymers has provided superior properties and enabled wide applications. This article reviews recent research progress in aromatic high-performance polymers. Particularly, we focus on the synthesis and processing of polyimides, as well as the application in gas separation membranes. We begin with a brief introduction to highlight important history and physiochemical characteristics of polyimides. Then, we review the various synthesis methods, followed by recent advances for improving processability. Finally, we evaluate the use of high-performance polymers in gas separation membranes with focus given to the key issues of plasticization and aging. Overall, the information presented herein provides an up-to-date overview of high-performance polymers, polyimides particularly, and serves as a guide for further research involving the applications in membrane technologies.
Latest Development on Membrane Fabrication for Natural Gas Purification: A Review

Dzeti Farhah Mohshim,Hilmi bin Mukhtar,Zakaria Man,Rizwan Nasir

DOI: https://doi.org/10.1155/2013/101746

2013-01-01

Journal of Engineering

Abstract:In the last few decades, membrane technology has been a great attention for gas separation technology especially for natural gas sweetening. The intrinsic character of membranes makes them fit for process escalation, and this versatility could be the significant factor to induce membrane technology in most gas separation areas. Membranes were synthesized with various materials which depended on the applications. The fabrication of polymeric membrane was one of the fastest growing fields of membrane technology. However, polymeric membranes could not meet the separation performances required especially in high operating pressure due to deficiencies problem. The chemistry and structure of support materials like inorganic membranes were also one of the focus areas when inorganic membranes showed some positive results towards gas separation. However, the materials are somewhat lacking to meet the separation performance requirement. Mixed matrix membrane (MMM) which is comprising polymeric and inorganic membranes presents an interesting approach for enhancing the separation performance. Nevertheless, MMM is yet to be commercialized as the material combinations are still in the research stage. This paper highlights the potential promising areas of research in gas separation by taking into account the material selections and the addition of a third component for conventional MMM.
Effect of Temperature-Induced Aging on the Gas Permeation Behavior of Thin Film Composite Membranes of PIM-1 and Carboxylated PIM-1

Ming Yu,Andrew B Foster,Mustafa Alshurafa,Colin A Scholes,Sandra E Kentish,Peter M Budd

DOI: https://doi.org/10.1021/acs.iecr.4c02230

2024-09-04

Abstract:Polymers of intrinsic microporosity (PIMs) are a class of promising gas separation materials due to their high membrane permeabilities and reasonable selectivities. When processed into thin film composite (TFC) membranes, their high gas throughput aligns closely with industrial requirements, but they are prone to physical aging and plasticization effects. TFC membranes based on the prototypical PIM-1 and its carboxylated derivative cPIM-1 exhibit temperature-dependent gas permeation behavior, which has not been extensively studied before. In single CO2 permeation tests, measurable physical aging occurred when the temperature was raised to 55 °C within a period of 90 min, and the aging rate accelerated as temperature was raised further. TFC membranes prepared from cPIM-1 exhibited a faster aging rate compared to PIM-1 at the same temperature. The decreased permeance could be at least partially recovered through a 5 day methanol vapor treatment. In mixed gas experiments, all membranes showed decreased permselectivities at elevated temperatures. The plasticization pressure of TFC membranes occurred at around 1 bar of CO2 partial pressure, independent of temperature. Significant plasticization was particularly evident for cPIM-1 TFC membranes under CO2/CH4 conditions with increasing temperature, which resulted in increased gas permeance for both components.
Physical Aging Investigations of a Spirobisindane-Locked Polymer of Intrinsic Microporosity

Min Liu,Xinxin Lu,Mitchell D. Nothling,Cara M. Doherty,Lianhai Zu,Judy N. Hart,Paul A. Webley,Jianyong Jin,Qiang Fu,Greg G. Qiao

DOI: https://doi.org/10.1021/acsmaterialslett.0c00184

IF: 11.4

2020-07-16

ACS Materials Letters

Abstract:Polymers of intrinsic microporosity (PIMs) have exceptional gas separation performance for a broad range of applications. However, PIMs are highly susceptible to physical aging, which drastically reduces their long-term performance over time. In this work, we leverage complementary experimental and density functional theory (DFT) studies to decipher the inter-/intrachain changes that occur during aging of the prototypical PIM-1 and its rigidified analogue PIM-C1. By elucidating this hereto unexplored aging behavior, we reveal that the dramatic decrease in gas permeability of PIM materials during aging stems from a loss of fractional free volume (FFV) due to PIM chain relaxations induced by π–π interactions, hydrogen bonding, or van der Waals' forces. While the PIM-1 based membranes displayed enhanced gas pair selectivities after aging, the PIM-C1 based membranes showed an opposite trend with unexpected reductions for CO2/N2 and CO2/CH4. This is due to the reductions in CO2/N2 and CO2/CH4 solubility (S) selectivities and, unlike PIM-1, the spirobisindane locked PIM-C1 (i.e., maintenance of micropore sizes) has a stable diffusivity (D) selectivities that cannot offset such reductions. These fundamental insights into the intrinsic relaxation of different PIM polymer chains during physical aging can guide the future design of high-performance PIM materials with enhanced anti-aging properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmaterialslett.0c00184?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmaterialslett.0c00184</a>.Methods, characterization, TGA, DFT simulation, TFC membrane performance, and proposed PIM structures (<a class="ext-link" href="/doi/suppl/10.1021/acsmaterialslett.0c00184/suppl_file/tz0c00184_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary
Sub-100 nm carbon molecular sieve membranes from a polymer of intrinsic microporosity precursor: Physical aging and near-equilibrium gas separation properties

Wojciech Ogieglo,Tiara Puspasari,Xiaohua Ma,Ingo Pinnau

DOI: https://doi.org/10.1016/j.memsci.2019.117752

IF: 9.5

2020-03-01

Journal of Membrane Science

Abstract:Challenging molecular separation tasks continue to drive the need for advanced membranes, which could combine high productivity and selectivity with outstanding chemical resistance and mechanical robustness. Here, ultra-thin, sub-100 nm carbon molecular sieve (CMS) membranes based on a polymer of intrinsic microporosity precursor were fabricated and characterized with respect to their separation performance for six gases, He, H2, N2, O2, CO2 and CH4. The rarely reported in thin CMS membranes physical aging was tracked until near-equilibrium was reached. The use of commercially available, small pore size (2–5 nm) γ-alumina-coated α-alumina ceramic supports allowed for an easy membrane precursor fabrication by a simple solution coating process. The subsequent application of a protective polydimethylsiloxane layer, as often done in research and membrane production, assured excellent defect control and produced CMS composite membranes with very high membrane permselectivities (e.g. CO2/CH4 = 84.5, H2/CH4 = 360). No significant deviations from bulk properties in terms of the chemical decomposition were discovered in the film thickness range of 60–300 nm. However, a surprisingly massive acceleration of the physical aging in comparison to the bulk was detected in all sub-100 nm membranes including the precursor polymer. All CMS membranes reached near-equilibrium gas transport properties within 1–1.5 months providing a rare opportunity to study aging-stabilized performance. For the aging-stabilized sub-100 nm membranes a decrease in gas permeabilities of up to 3 orders of magnitude was detected. Remarkably, sub-100 nm CMS membranes showed significantly increased selectivities typical to thick isotropic CMS membranes pyrolyzed at 100–200 °C higher temperatures. A clear aging-related shift to more significant size sieving behavior occurred for the majority of the studied CMS membranes throughout the aging period. Overall, our study provides an important observation that excessive reduction of the selective layer thickness, especially in initially highly microporous materials (PIMs, CMS etc.), may not present the best strategy for the optimization of the long-term membrane performance.

engineering, chemical,polymer science
Metal‐Coordinated, Dual‐Crosslinked PIM Polymer Membranes for Upgraded CO2 Separation: Aging and Plasticization Resistance

Iqubal Hossain,Kwan Il Kim,Asmaul Husna,Jun Hyeok Kang,Tae‐Hyun Kim,Ho Bum Park

DOI: https://doi.org/10.1002/smll.202407973

IF: 13.3

2024-11-04

Small

Abstract:Metal ions are effectively sandwiched within the side chains (COOH and CONH2) of the hydrolysed PIM polymer through ionic and coordination bonding to prepare a dual‐crosslinked membrane. The resulting membrane exhibits outstanding CO2 separation performance over N2 and CH4, surpassing the 2008 Robeson upper bound limits, and demonstrates excellent anti‐aging and anti‐plasticization properties. The practical use of polymers of intrinsic microporosity (PIMs) in CO2 separation is often hindered by their moderate selectivity, performance instability over time, and pressure constraints. To address these limitations, a straightforward approach is presented to enhance the CO2 separation capability of PIM‐1 by incorporating metal ions into uniformly hydrolyzed PIM‐1 (cPIM). This dual linking strategy, achieved via ionic and coordination bonding of metal ions with the polymeric side chains including ─COOH and ─CONH2, restructures the polymer, disrupting hydrogen bonds between cPIM chains and creating active sites for CO2 via π‐complexation. This modification enhances gas permeability while maintaining high selectivity. The optimized zinc‐coordinated membrane achieves an impressive CO2 permeability of ≈2,500 Barrer with CO2/N2 and CO2/CH4 selectivities of 27.1 and 23, respectively, outperforming pristine cPIM (700 Barrer; CO2/N2 = 27; CO2/CH4 = 19). Notably, this performance surpasses the 2008 Robeson upper‐bound limits for both gas pairs. Additionally, the metal‐coordinated membranes exhibit remarkable long‐term stability, resisting aging effects for up to 20 days and maintaining anti‐plasticization properties at pressures up to 20 bar. These dual‐crosslinked membranes demonstrate promising potential for mixed gas separation, indicating their suitability for real‐world industrial applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A Review on Porous Polymeric Membrane Preparation. Part II: Production Techniques with Polyethylene, Polydimethylsiloxane, Polypropylene, Polyimide, and Polytetrafluoroethylene

XueMei Tan,Denis Rodrigue,Tan,Rodrigue

DOI: https://doi.org/10.3390/polym11081310

IF: 5

2019-08-05

Polymers

Abstract:The development of porous polymeric membranes is an important area of application in separation technology. This article summarizes the development of porous polymers from the perspectives of materials and methods for membrane production. Polymers such as polyethylene, polydimethylsiloxane, polypropylene, polyimide, and polytetrafluoroethylene are reviewed due to their outstanding thermal stability, chemical resistance, mechanical strength, and low cost. Six different methods for membrane fabrication are critically reviewed, including thermally induced phase separation, melt-spinning and cold-stretching, phase separation micromolding, imprinting/soft molding, manual punching, and three-dimensional printing. Each method is described in details related to the strategy used to produce the porous polymeric membranes with a specific morphology and separation performances. The key factors associated with each method are presented, including solvent/non-solvent system type and composition, polymer solution composition and concentration, processing parameters, and ambient conditions. Current challenges are also described, leading to future development and innovation to improve these membranes in terms of materials, fabrication equipment, and possible modifications.

polymer science

[Psychological reactions of patients with ischemic heart disease to aortocoronary bypass].

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Plasma Polymerized Coatings on Hollow Fiber Membranes-Applications and Their Aging Characteristics in Different Media

Mitigated Aging in a Defective Metal–Organic Framework Pillared Polymer of an Intrinsic Porosity Hybrid Membrane for Efficient Gas Separation

Physical Aging of Glassy Perfluoropolymers in Thin Film Composite Membranes. Part Ii. Glass Transition Temperature and the Free Volume Model

Advancements in Gas Separation for Energy Applications: Exploring the Potential of Polymer Membranes with Intrinsic Microporosity (PIM)

Elucidating the Molecular Mechanisms by which Porous Polymer Networks Affect Structure, Aging Propensity, and Selectivity of Microporous Glassy Polymer Membranes using a Multiscale Approach

RADAR PRECIPITATION ESTIMATES IN MOUNTAINOUS REGIONS : CORRECTIONS FOR PARTIAL BEAM BLOCKAGE AND GENERAL RADAR COVERAGE LIMITATIONS

Impact of Sub-Ambient Temperature on Aging Rate and Gas Separation Properties of Polymers of Intrinsic Microporosity

High Gas Permeability in Aged Superglassy Membranes with Nanosized UiO-66-NH2 /cPIM-1 Network Fillers

Physical aging in carbon molecular sieve membranes

High performance polymers for membrane separation

Recent 10-year development on surface modification of polymeric hollow fiber membranes via surface coating approach for gas separation: a review

Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Recent development of polyimides: Synthesis, processing, and application in gas separation

Latest Development on Membrane Fabrication for Natural Gas Purification: A Review

Effect of Temperature-Induced Aging on the Gas Permeation Behavior of Thin Film Composite Membranes of PIM-1 and Carboxylated PIM-1

Physical Aging Investigations of a Spirobisindane-Locked Polymer of Intrinsic Microporosity

Sub-100 nm carbon molecular sieve membranes from a polymer of intrinsic microporosity precursor: Physical aging and near-equilibrium gas separation properties

Metal‐Coordinated, Dual‐Crosslinked PIM Polymer Membranes for Upgraded CO2 Separation: Aging and Plasticization Resistance

A Review on Porous Polymeric Membrane Preparation. Part II: Production Techniques with Polyethylene, Polydimethylsiloxane, Polypropylene, Polyimide, and Polytetrafluoroethylene