Abstract:Over the past twenty years, metal-organic frameworks (MOFs) have emerged as extensively developed porous class of materials and are increasingly recognized as promising candidates for membrane-based CO2 separation. This potential primarily stems from the ability to deliberately customize their structure and functionalities to enhance interactions with guest molecules. In this study, we explore the use of MOF-525, a porphyrin-based MOF, as a nanofiller in a mixed matrix membrane (MMM) composed of 6FDA-DAM (6FDA: 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride; DAM: 2,4,6-trimethyl-1,3-diaminobenzene) polymer for CO2/N2 and CO2/CH4 separations. This particular MOF is chosen because of the possibility to metalate its porphyrin ring to tailor the interaction between the CO2 molecule and the MOF framework. As a result, the CO2/N2 and CO2/CH4 separation performance of the MMM loaded with metalated MOF-525 can be significantly improved without the necessity to use a very high nanoparticle loading. When compared to the bare polymeric membrane and 2 wt% non-metalated MOF-525 MMM, around 20% improvement in the membrane permeability and selectivity can be observed for the 2 wt% metalated MOF-525 MMM. Further analysis on the gas transport property of the MMM showed that the improvement mainly results from the enhanced CO2 solubility in the MMMs and improved interaction between the metalated MOF-525 and the CO2 molecule. However, it is also found that 2 and 5 wt% are the optimum loading value, above which the interfacial defects between the MOF nanoparticles and the polymers caused by the particle agglomeration starts to appear and thus deteriorating the membrane performance. This is also confirmed through the molecular simulations where some overestimations from the Maxwell model on the membrane permeability is observed particularly at high particle loading, indicating the agglomeration and the build-up of non-selective voids. Despite this, we have successfully shown in this study the high efficacy and efficiency of using metalated porphyrin MOFs for CO2 separation in a MMM since only relatively low particle loading (around 2 wt%) is required to improve the membrane performance.

Mixed matrix membranes (MMMs) using an emerging metal-organic framework (MUF-15) for CO2 separation

PIM-based mixed-matrix membranes containing MOF-801/ionic liquid nanocomposites for enhanced CO2 separation performance

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

Metal-organic framework MOF-801/PIM-1 mixed-matrix membranes for enhanced CO2/N2 separation performance

Boosting Carbon Capture with CO 2 -Ultrapermeable Molecularly Imprinted Membranes

Mixed matrix membranes with intrinsic microporous/UiO-66 post-synthesis modifications with no defects for efficient CO 2 /N 2 separation

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

Amino-functionalized NUS-8 Nanosheets As Fillers in PIM-1 Mixed Matrix Membranes for CO2 Separations

Incorporating KAUST-7 into PIM-1 Towards Mixed Matrix Membranes with Long-Term Stable CO2/CH4 Separation Performance

Imperfect perfection: Selective induction of CO 2 during diffusion in mixed matrix membranes

Enhanced 2-D MOFs nanosheets/PIM-PMDA-OH mixed matrix membrane for efficient CO2 separation

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

Investigation of MOF-525 and post-metalated MOF-525 as nanofillers in mixed matrix membranes for CO2 separation

Development of Mixed Matrix Membranes by Using NH2‐Functionalized UiO‐66 and [APTMS][AC] Ionic Liquid for the Separation of CO2

Preparation of Amino-Functional UiO-66/PIMs Mixed Matrix Membranes with [bmim][Tf2N] as Regulator for Enhanced Gas Separation

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Pebax/two-dimensional MFI nanosheets mixed-matrix membranes for enhanced CO2 separation

Dormancy and double-activation strategy for construction of high-performance mixed-matrix membranes

Tuning the Multi-Scale Structure of Mixed-Matrix Membranes for Upgrading CO2 Separation Performances

Amidoxime Modified UiO-66@PIM-1 Mixed-Matrix Membranes to Enhance CO2 Separation and Anti-Aging Performance