Abstract:Among the existing unsupervised bridge damage detection methods, it is difficult to quantify bridge damage severity levels, although some of the methods can achieve the localization of bridge damage. In the existing research, the damage index (DI) curve is calculated by the monitoring point dynamic response (inclination or deflection) of the bridge in the damage state, and the localization of the bridge damage can be achieved by the DI curve without the need for damage labels. Based on this bridge damage localization method, this paper proposes an efficient bridge damage severity level quantification method. Since the different DI curves calculated under the same damaged state basically coincide with each other, the DI curves will change with the bridge-damaged state. Therefore, the quantification of the bridge damage severity level is achieved by only calculating DI curves of different damage degrees at the damage location. To efficiently calculate the DI curve, this paper proposes a method for generating the monitoring point dynamic response of the specified damage bridge. By the specified damage bridge finite element model (FEM) static simulation to obtain arbitrary vertical nodal loads and monitoring point responses of the relationship function, and then combined with the healthy state of the bridge monitoring point dynamic response can be generated monitoring point dynamic response of the specified damage bridge. Since the method in this paper is based on real measured data to calculate the DI curve, it is more robust to noise and modeling errors than the FEM dynamic simulation method, and the modeling of this method only needs to update the model stiffness parameter to reduce the modeling cost. In the example of this paper, the method of this paper calculates the DI curve of one damage state only needs about 7 s about 437 times the computational efficiency of the FEM dynamic simulation method, which can achieve the fast quantification of bridge damage severity levels. Numerical simulations demonstrate that the method can localize and quantify multi-damage in bridges under unknown loads, a small number of sensors, noise, and modeling errors. However, the method in this paper still has limitations that do not apply to the localization and quantification of bridge pier damage and nonlinear models.

Damage index based on the strain‐to‐displacement relation for health monitoring of railway bridges

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

A Damage Index Based on Strain Measurement for Structures Under Environmental Excitation

A strain sensor based monitoring and damage detection system for a two-span beam bridge

Data-driven damage identification technique for steel truss railroad bridges utilizing principal component analysis of strain response

Bridge damage detection from the equivalent damage load by multitype measurements

New Approach for Strain Modal Measurement and Damage Detection of Bridges

Comparative study on sensitivity of acceleration and strain responses for bridge health monitoring

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Bridge Health Monitoring Using Strain Data and High-Fidelity Finite Element Analysis

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Bridge damage localization and quantification using deep learning and FEM static simulation

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

Damage Identification Method for Medium- and Small-Span Bridges Based on Macro-Strain Data under Vehicle-Bridge Coupling

Approach of speculating the dynamic strain by measuring displacement

Non-contact structural health monitoring of a cable-stayed bridge: case study

Analytical study on damage detection method using displacement influence lines of road bridge slab

Quantification of Damage Using Indirect Structural Health Monitoring

Research and Modification on the Park-Ang Damage Index for Railway Rectangular Piers

On the effectiveness of sparse regularization for structural damage diagnosis using dynamic strain measurements

Monitoring bearing damage in bridges using accelerations from a fleet of vehicles, without prior bridge or vehicle information