Abstract:Highlights • Mass transfer enhancement at jet-impinged stack of separated horizontal screens. • High space-time yield reactor suitable for diffusion-controlled reactions. • The effects of jet velocity, nozzle diameter, and screen porosity were studied. • Overall correlation was obtained for electrochemical and catalytic reactor design. • Energy efficient reactor valid for biochemical and photocatalytic applications. The mass transfer characteristics of a submerged liquid jet impinging on a stack of separated screens were investigated by the electrochemical limiting current technique. The effects of changing the jet velocity, the nozzle diameter, and the screens' porosity were studied. The present mass transfer data were found to be much higher than the data obtained by previous studies on jet impinging on flat surfaces. The mass transfer data also revealed that using the impinging jet greatly enhanced the mass transfer at screen surfaces with respect to other conventional forced convection methods used in previous studies. The mass transfer data were correlated by the equation: ShR=0.253Sc0.33ReN0.66ε0.745 for the conditions: Sc=1898, 8071 ≤ ReN ≤ 33631, 0.668≤ ε ≤ 0.809. The importance of the above equation in the scale up and design of electrochemical and catalytic reactors suitable for diffusion-controlled reactions was highlighted. The calculated high energy utilization efficiency ( kA/e ) of the reactor lends support to its use in practice in preference to reactors made of flat surfaces impinged by a submerged jet. By supporting catalyst on the screens, the reactor also can replace stirred slurry reactors usually used in conducting biochemical and photochemical reactions in order to eliminate the time consuming and the costly step of separating the final product from the catalyst particles. Graphical abstract Download : Download high-res image (337KB) Download : Download full-size image

Liquid – Solid Mass Transfer Characteristics of a Heterogeneous Reactor Made of Separated Horizontal Woven Screens Impinged by a Submerged Jet

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Using in-line static mixers to intensify gas–liquid mass transfer processes

Mass Transfer Behavior and Energy Utilization Efficiency of a Fixed Bed Suspended in a Stirred Tank Reactor

Mass and heat transfer behavior of a bubble column fitted with horizontal spiral tubes in bubbly-flow regime

The study on mass transfer characteristics of the intensified gas-liquid jet stirred reactor

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

Solid-liquid mass transfer in a bubble column reactor with tube bank internals

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

A study of mass transfer in a packed bed reactor by electrochemical technique

Mass transfer to reactive boundaries from steady three-dimensional flows in microchannels

Flow Simulation and Experimental Study of a Dynamic Asymmetric Impinging Stream

Hydrodynamics and mass transfer in a slurry external airlift loop reactor integrating mixing and separation

Impacts of solid physical properties on the performances of a slurry external airlift loop reactor integrating mixing and separation

Effect of surface properties on the flow characteristics and mass transfer performance in microchannels

Effects of Internal Structures on Mass Transfer Performance of Jet Bubbling Reactor

Gas Holdup, Bubble Size Distribution, and Mass Transfer in an Airlift Reactor with Ceramic Membrane and Perforated Plate Distributor

eNETmix: A pioneering electrochemical flow reactor with enhanced mass transfer

Application of a Film Model to Mass Transfer and Chemical Reaction at a Plasma-Liquid Interface

Flow dynamics, heat and mass transfer of laminar, round twin-jet impinging a uniformly heated flat plate