Abstract:Introduction Reducing CO2 emissions for addressing climate change concerns is becoming increasingly important as the CO2 concentration in the atmosphere has increased rapidly since the industrial revolution. Most of currently investigated mitigation processes require CO2 in a concentrated form. However, CO2 is emitted from large sources, such as coal-fired power plants, at ~15% concentration. Therefore, capturing CO2 from dilute streams is an important step for many mitigation methods. Membrane separation methods are particularly promising due to potentially high CO2 selectivities and fluxes. By a proper choice of the pore size and surface properties, the CO2 transport across a membrane can be facilitated with respect to those of N2 and O2 leading to an efficient CO2 separation process. However, current membranes suffer from a poor control over the pore size on the 2-4 nm scale and surface properties required for CO2 separation. 2 We describe here novel mesoporous silica membranes containing surface-attached amino groups promising for CO2 separation from dilute sources. Defect-free mesoporous silica membranes on porous alumina supports exhibiting 26~28A pores were obtained by spin-coating (~5-7 μm thick) and solution growth methods. Several kind of amino groups were attached to the membrane surface using amino-containing silicon alkoxides, such as 3-aminopropyltriethoxysilane. Smaller pores (~18-22A) were obtained by silylating the original calcined membranes with silane coupling agents. The characterization of the silylated silica membranes by BET surface area measurements, N2 adsorption pore size analysis and TGA confirmed that silylation technique was successful in decreasing the membrane pore size by ~8 A which is required for completely filling the pore volume with surface attached aminopropylsilyl groups and achieving facilitated transport of CO2. CO2/N2 separation on amine-modified silica membranes was investigated at 20-70C and transmembrane pressure drop of 0.2-1 atm as a function of the pore size and the nature of the amino group using a Wicke-Kalenbach permeability cell. The membrane performance was evaluated with respect to permeance and separation selectivity, determined by a GC/MS analysis of the feed, permeate, and retentate streams.

Boosting the CO2 capture efficiency through aromatic bridged organosilica membranes

Ultrahigh permeation of CO2 capture using composite organosilica membranes

Rigid-flexible coupled organosilica membranes toward high-efficiency molecules separation

Homogeneous sub-nanophase network tailoring of dual organosilica membrane for enhancing CO2 gas separation

Sub-nanometer scale tailoring of the microstructures of composite organosilica membranes for efficient pervaporation of toluene/n-heptane mixtures

Multiple Amine-Contained POSS-Functionalized Organosilica Membranes for Gas Separation

Solvent effects on diffusion channel construction of organosilica membrane with excellent CO2 separation properties

Mixed-Matrix Organo–Silica–Hydrotalcite Membrane for CO2 Separation Part 2: Permeation and Selectivity Study

Fabrication of Highly Selective Organosilica Membrane for Gas Separation by Mixing Bis(triethoxysilyl)ethane with Methyltriethoxysilane

Planetary cross-linked structure design of hybrid organosilica membrane by amine-driven polymerization for CO2 separation

Hybrid Organosilica Membrane with High CO2 Permselectivity Fabricated by a Two-Step Hot Coating Method

Mesoporous bis(trimethoxysilyl)hexane (BTMSH)/tetraethyl orthosilicate (TEOS)-based hybrid silica aerogel membranes for CO2 capture

Remarkable enhancement of gas selectivity on organosilica hybrid membranes using urea-modulated metal-organic framework nanoparticles

Chemical topology molecular engineering of CO 2 -philic membranes toward highly efficient carbon capture

Ordered Mesoporous Silica Membranes for CO2 Separation from Flue Gas

Surpassing Robeson Upper Limit for CO2/N2 Separation with Fluorinated Carbon Molecular Sieve Membranes

Mixed-Matrix Organo-Silica-Hydrotalcite Membrane for CO2 Separation Part 1: Synthesis and Analytical Description

Nanocomposite Membranes for CO2 Separations: Silica/Brominated Poly(phenylene Oxide)

Supported Ionic Liquid Membranes with Dual-Site Interaction Mechanism for Efficient Separation of CO2

Highly CO 2 -Selective Membranes Composed of Quaternary Ammonium Functionalized Silica Nanoparticles

MOF-derived nanocomposites functionalized carbon molecular sieve membrane for enhanced ethylene/ethane separation